| Message ID | 20250417-dwc2_clock_gating-v1-1-8ea7c4d53d73@pengutronix.de |
|---|---|
| State | New |
| Headers | show |
| Series | usb: dwc2: also exit clock_gating when stopping udc while suspended | expand |
On 4/17/25 21:40, Michael Grzeschik wrote: > It is possible that the gadget will be disabled, while the udc is > suspended. When enabling the udc in that case, the clock gating > will not be enabled again. Leaving the phy unclocked. Even when the > udc is not enabled, connecting this powered but not clocked phy leads > to enumeration errors on the host side. > > To ensure that the clock gating will be in an valid state, we ensure > that the clock gating will be enabled before stopping the udc. > > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> > --- > drivers/usb/dwc2/gadget.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c > index 300ea4969f0cf..f323fb5597b32 100644 > --- a/drivers/usb/dwc2/gadget.c > +++ b/drivers/usb/dwc2/gadget.c > @@ -4604,6 +4604,12 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) > if (!hsotg) > return -ENODEV; > > + /* Exit clock gating when driver is stopped. */ > + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && > + hsotg->bus_suspended && !hsotg->params.no_clock_gating) { > + dwc2_gadget_exit_clock_gating(hsotg, 0); > + } > + > /* all endpoints should be shutdown */ > for (ep = 1; ep < hsotg->num_of_eps; ep++) { > if (hsotg->eps_in[ep]) > > --- > base-commit: cfb2e2c57aef75a414c0f18445c7441df5bc13be > change-id: 20250417-dwc2_clock_gating-579a87fcdf93 > > Best regards,
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 300ea4969f0cf..f323fb5597b32 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4604,6 +4604,12 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) if (!hsotg) return -ENODEV; + /* Exit clock gating when driver is stopped. */ + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && + hsotg->bus_suspended && !hsotg->params.no_clock_gating) { + dwc2_gadget_exit_clock_gating(hsotg, 0); + } + /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep])
It is possible that the gadget will be disabled, while the udc is suspended. When enabling the udc in that case, the clock gating will not be enabled again. Leaving the phy unclocked. Even when the udc is not enabled, connecting this powered but not clocked phy leads to enumeration errors on the host side. To ensure that the clock gating will be in an valid state, we ensure that the clock gating will be enabled before stopping the udc. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- drivers/usb/dwc2/gadget.c | 6 ++++++ 1 file changed, 6 insertions(+) --- base-commit: cfb2e2c57aef75a414c0f18445c7441df5bc13be change-id: 20250417-dwc2_clock_gating-579a87fcdf93 Best regards,