Patch Metrics

Linaro contributions to linux-usb.

Patches per month: Submitted Accepted

Project Details

List addresslinux-usb@vger.kernel.org
Source treegit://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
Last commit scanned41f1830f5a7af77cf5c86359aba3cbd706687e52
Show patches with: State = Action Required       |    Archived = No   
« 1 2 3 4 … 4 5 »
Patch Series S/W/F Date Submitter Delegate State
[2/5] dt-bindings: phy-hisi-inno-usb2: add support for hisi-inno-usb2 phy Untitled series #2540 0 0 0 2017-06-21 Jiancheng Xue New
usb: remove NULL pointer check for clk_disable_unprepare 0 0 0 2017-05-20 Masahiro Yamada New
[v3,2/3] usb: phy: phy-qcom-8x16-usb: Remove redundant extcon register/unregister Introduce one extcon device into usb phy 0 0 0 2017-05-05 Baolin Wang New
[5/5,v3] ARM: dts: Add the FOTG210 USB host to Gemini [1/5,v3] usb: host: add DT bindings for faraday fotg2 0 0 0 2017-04-21 Linus Walleij New
[4/5,v3] usb: host: fotg2: add Gemini-specific handling [1/5,v3] usb: host: add DT bindings for faraday fotg2 0 0 0 2017-04-21 Linus Walleij New
[3/5,v3] usb: host: fotg2: add silicon clock handling [1/5,v3] usb: host: add DT bindings for faraday fotg2 0 0 0 2017-04-21 Linus Walleij New
[2/5,v3] usb: host: fotg2: add device tree probing [1/5,v3] usb: host: add DT bindings for faraday fotg2 0 0 0 2017-04-21 Linus Walleij New
[1/5,v3] usb: host: add DT bindings for faraday fotg2 [1/5,v3] usb: host: add DT bindings for faraday fotg2 0 0 0 2017-04-21 Linus Walleij New
[1/8] usb: host: plat: Enable xHCI plat runtime PM [1/8] usb: host: plat: Enable xHCI plat runtime PM 0 0 0 2017-04-19 Mathias Nyman New
[v2] usb: host: plat: Enable xHCI plat runtime PM 0 0 0 2017-04-13 Baolin Wang New
[v2,12/24] xhci: Do not halt the host until both HCD have disconnected their devices. Untitled series #1066 0 0 0 2017-04-07 Mathias Nyman New
[v2,24/24] usb: xhci: bInterval quirk for TI TUSB73x0 Untitled series #1038 0 0 0 2017-04-05 Mathias Nyman New
[v3,2/2] usb: otg-fsm: Prevent build warning "VDBG" redefined Untitled series #938 0 0 0 2017-03-30 Roger Quadros New
[v2,1/2] usb: phy: Introduce one extcon device into usb phy [v2,1/2] usb: phy: Introduce one extcon device into usb phy 0 0 0 2017-03-23 Baolin Wang New
[1/2] usb: phy: Introduce one extcon device into usb phy [1/2] usb: phy: Introduce one extcon device into usb phy 0 0 0 2017-03-17 Baolin Wang New
[6/6] usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS [1/6] usb: musb: dma: Add a DMA completion platform callback 0 0 0 2017-02-07 Bin Liu New
[5/6] usb: musb: tusb6010: Clean up tusb_omap_dma structure [1/6] usb: musb: dma: Add a DMA completion platform callback 0 0 0 2017-02-07 Bin Liu New
[4/6] usb: musb: cppi_dma: Clean up cppi41_dma_controller structure [1/6] usb: musb: dma: Add a DMA completion platform callback 0 0 0 2017-02-07 Bin Liu New
[3/6] usb: musb: cppi_dma: Clean up cppi structure [1/6] usb: musb: dma: Add a DMA completion platform callback 0 0 0 2017-02-07 Bin Liu New
[2/6] usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback() [1/6] usb: musb: dma: Add a DMA completion platform callback 0 0 0 2017-02-07 Bin Liu New
[1/6] usb: musb: dma: Add a DMA completion platform callback [1/6] usb: musb: dma: Add a DMA completion platform callback 0 0 0 2017-02-07 Bin Liu New
[09/17] usb: musb: da8xx: Fix host mode suspend [01/17] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods 0 0 0 2017-02-02 Bin Liu New
[08/17] usb: musb: Add a quirk to preserve the session during suspend [01/17] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods 0 0 0 2017-02-02 Bin Liu New
[07/17] usb: musb: da8xx: Add support of suspend / resume [01/17] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods 0 0 0 2017-02-02 Bin Liu New
[01/17] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods [01/17] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods 0 0 0 2017-02-02 Bin Liu New
[v5] ARM: dts: da850: Add the CPPI 4.1 DMA to the USB OTG controller 0 0 0 2017-01-30 Alexandre Bailon New
[v5,4/5] usb: musb: musb_cppi41: Workaround DMA stall issue during teardown usb: musb: da8xx: Add DMA support 0 0 0 2017-01-25 Alexandre Bailon New
[v5,1/5] usb: musb: da8xx: Remove CPPI 3.0 quirk and methods usb: musb: da8xx: Add DMA support 0 0 0 2017-01-25 Alexandre Bailon New
[v5,5/6] usb: musb: cppi_dma: Clean up tusb_omap_dma structure usb: musb: cppi41: Add a way to manage DMA irq 0 0 0 2017-01-25 Alexandre Bailon New
[v2] arm: davinci: Make the usb20 clock available to PM runtime 0 0 0 2017-01-24 Alexandre Bailon New
[v4,5/5] usb: musb: da8xx: Add a primary support of PM runtime usb: musb: da8xx: Add DMA support 0 0 0 2017-01-24 Alexandre Bailon New
[v4,3/5] usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx usb: musb: da8xx: Add DMA support 0 0 0 2017-01-24 Alexandre Bailon New
[v3,18/24] usb: dwc2: Workaround case where GOTGCTL state is wrong Untitled series #151 0 0 0 2017-01-23 John Youn New
[v3,17/24] usb: dwc2: Avoid sleeping while holding hsotg->lock Untitled series #151 0 0 0 2017-01-23 John Youn New
[v2,06/37] usb: host: xhci: Remove unused 'addr_64' variable in xhci_hcd structure Untitled series #140 0 0 0 2017-01-23 Mathias Nyman New
[v3,4/4] dmaengine: cppi41: init_sched(): Get number of channels from DT dmaengine: cppi41: Make CPPI 4.1 driver more generic 0 0 0 2017-01-19 Alexandre Bailon New
[v3,1/3] usb: musb: dma: Add a DMA completion platform callback usb: musb: cppi41: Add a way to manage DMA irq 0 0 0 2017-01-19 Alexandre Bailon New
[3/3] usb: dwc2: Avoid suspending if we're in gadget mode 0 0 0 2017-01-09 John Youn New
[1/3] usb: dwc2: use u32 for DT binding parameters 0 0 0 2017-01-09 John Youn New
[v2,2/2] dmaengine: cppi41: Ignore EINPROGRESS for PM runtime in interrupt handler 0 0 0 2017-01-09 Alexandre Bailon New
[2/4] usb: musb: Add support of cppi41 dma controller for da8xx to Kconfig 0 0 0 2017-01-09 Alexandre Bailon New
[3/3] ARM: dts: da850: Enable cppi41 dma for da850-lcdk 0 0 0 2017-01-09 Alexandre Bailon New
[2/3] ARM: dts: da850: Add the cppi41 dma to the usb otg controller 0 0 0 2017-01-09 Alexandre Bailon New
ARM: davinci: da850: Share the usb20 clock 0 0 0 2017-01-09 Alexandre Bailon New
[10/11] dmaengine: cppi41: Fix da8xx interrupt issue 0 0 0 2017-01-09 Alexandre Bailon New
[08/11] dmaengine: cppi41: Implement the glue for da8xx 0 0 0 2017-01-09 Alexandre Bailon New
[05/11] dmaengine: cppi41: Add a way to test if the driver is running on am335x 0 0 0 2017-01-09 Alexandre Bailon New
[02/11] dmaengine: cppi41: Split out the interrupt handler 0 0 0 2017-01-09 Alexandre Bailon New
[2/2] dmaengine: cppi41: Ignore EINPROGRESS for PM runtime in interrupt handler 0 0 0 2017-01-04 Alexandre Bailon New
[1/2] dmaengine: cppi41: Fix list not empty warning on runtime suspend 0 0 0 2017-01-04 Alexandre Bailon New
Oops with dwc3 in device mode and functionfs 0 0 0 2017-01-03 Vincent Pelletier New
[v6,23/25] usb: chipidea: Pullup D+ in device mode via phy APIs 0 0 0 2016-12-28 Stephen Boyd New
[v6,19/25] usb: chipidea: msm: Add reset controller for PHY POR bit 0 0 0 2016-12-28 Stephen Boyd New
[v6,15/25] usb: chipidea: msm: Add proper clk and reset support 0 0 0 2016-12-28 Stephen Boyd New
[v2,2/2] usb: host: xhci: Handle the right timeout command 0 0 0 2016-12-20 Baolin Wang New
[v2,3/3] usb: musb: da8xx: Fix host mode suspend 0 0 0 2016-12-16 Alexandre Bailon New
[v2,2/3] usb: musb: Add a quirk to preserve the session during suspend 0 0 0 2016-12-16 Alexandre Bailon New
[v2,1/3] usb: musb: da8xx: Add support of suspend / resume 0 0 0 2016-12-16 Alexandre Bailon New
usb: host: xhci: Clean up commands when stop endpoint command is timeout 0 0 0 2016-12-13 Baolin Wang New
[v5,2/2] usb: dwc3: core: Support the dwc3 host suspend/resume 0 0 0 2016-12-13 Baolin Wang New
[2/2] usb: host: xhci: Handle the right timeout command 0 0 0 2016-12-05 Baolin Wang New
usb: gadget: uvc: fix UVC_ATTR macro for UVCG_OPTS_ATTR 0 0 0 2016-12-02 Jassi Brar New
[2/2] usb: dwc3: gadget: Clean up DCFG/DSTS FULLSPEED macro 0 0 0 2016-11-29 Roger Quadros New
[1/2] usb: dwc3: gadget: Fix full speed mode 0 0 0 2016-11-29 Roger Quadros New
[3/3] usb: musb: da8xx: Fix host mode suspend 0 0 0 2016-11-28 Alexandre Bailon New
[2/3] usb: musb: Add a quirk to preserve MUSB_DEVCTL during suspend 0 0 0 2016-11-28 Alexandre Bailon New
[v4,2/2] usb: dwc3: core: Support the dwc3 host suspend/resume 0 0 0 2016-11-28 Baolin Wang New
[v4,1/2] usb: host: plat: Enable xhci plat runtime PM 0 0 0 2016-11-28 Baolin Wang New
[v2] usb: xhci: Remove unuseful 'return' and 'break' statement 0 0 0 2016-11-24 Baolin Wang New
[11/11] usb: musb: da8xx: Set phy in OTG mode by default 0 0 0 2016-11-21 Bin Liu New
[10/11] usb: musb: da8xx: Call earlier clk_prepare_enable() 0 0 0 2016-11-21 Bin Liu New
[1/3] usb: xhci: add quirk flag for broken PED bits 0 0 0 2016-11-17 Roger Quadros New
[v5,1/2] ARM: dts: da850: Add the usb otg device node 0 0 0 2016-11-16 Alexandre Bailon New
[v5,2/3] usb: musb: core: added helper function for parsing DT 0 0 0 2016-11-16 Alexandre Bailon New
[v5,1/3] dt/bindings: Add binding for the DA8xx MUSB driver 0 0 0 2016-11-16 Alexandre Bailon New
[v6,2/2] usb: musb: da8xx: Set phy in OTG mode by default 0 0 0 2016-11-15 Alexandre Bailon New
[v5,3/4] usb: musb: Add a new argument to musb_platform_set_mode() 0 0 0 2016-11-07 Alexandre Bailon New
[v5,2/4] phy: da8xx-usb: Configure CFGCHIP2 to support OTG workaround 0 0 0 2016-11-07 Alexandre Bailon New
[v4,1/4] usb: musb: da8xx: Call earlier clk_prepare_enable() 0 0 0 2016-11-04 Alexandre Bailon New
[v3,4/5] phy: da8xx-usb: Use usb20_force_mode property to configure the phy mode 0 0 0 2016-11-03 Alexandre Bailon New
[v1] usb: dwc3: gadget: wait for End Transfer to complete 0 0 0 2016-10-31 Baolin Wang New
[75/82] usb: dwc3: gadget: wait for End Transfer to complete 0 0 0 2016-10-31 Felipe Balbi New
Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization" 0 0 0 2016-10-28 Leo Yan New
[v2,4/4] ARM: dts: da850: Add the usb otg device node 0 0 0 2016-10-26 Alexandre Bailon New
[v2,2/3] phy: da8xx-usb: Configure CFGCHIP2 to support OTG workaround 0 0 0 2016-10-26 Alexandre Bailon New
[PATCH/RFT,v2,06/17] ARM: davinci: da8xx: Fix some redefined symbol warnings 0 0 0 2016-10-24 Axel Haslam New
usb_ep_{dis,en}able() calling context (was: Re: [PATCH 2/3] usb: dwc3: gadget: wait for End Trans... 0 0 0 2016-10-20 Baolin Wang New
[v18,2/4] usb: gadget: Support for the usb charger framework 0 0 0 2016-10-19 Baolin Wang New
[v18,1/4] usb: gadget: Introduce the usb charger framework 0 0 0 2016-10-19 Baolin Wang New
[v5,10/23] usb: chipidea: Consolidate extcon notifiers 0 0 0 2016-10-18 Stephen Boyd New
[v4] usb: dwc3: Wait for control tranfer completed when stopping gadget 0 0 0 2016-10-14 Baolin Wang New
[v2] usb: dwc3: gadget: Wait for end transfer complete before free irq 0 0 0 2016-10-12 Baolin Wang New
usb: gadget: dummy_hcd: clear struct gadget on removal 0 0 0 2016-10-11 Rob Herring New
[v17,4/4] power: wm831x_power: Support USB charger current limit management 0 0 0 2016-10-10 Baolin Wang New
[RESEND,v3,2/2] usb: dwc3: Wait for control tranfer completed when stopping gadget 0 0 0 2016-10-04 Baolin Wang New
usb: xhci: mark xhci_unmap_td_bounce_buffer() static 0 0 0 2016-09-23 Baoyou Xie New
usb: gadget: Add uevent to notify userspace 0 0 0 2016-09-22 Baolin Wang New
[v3,1/2] usb: dwc3: gadget: Add disconnect checking when changing function dynamically 0 0 0 2016-09-19 Baolin Wang New
[RFC/PATCH] usb: chipidea: Emulate OTGSC interrupt enable path 0 0 0 2016-09-14 Stephen Boyd New
[v2,2/2] usb: dwc3: Wait for control tranfer completed when stopping gadget 0 0 0 2016-09-09 Baolin Wang New
« 1 2 3 4 … 4 5 »