diff mbox

[v4,7/7] dts: dra7-evm: add USB support

Message ID 53732215.8050608@ti.com
State New
Headers show

Commit Message

Roger Quadros May 14, 2014, 7:58 a.m. UTC 
From: Roger Quadros <rogerq@ti.com>

Add USB pinmux information and USB modes
for the USB controllers.

CC: Benoît Cousson <bcousson@baylibre.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/dra7-evm.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Comments

Tony Lindgren May 14, 2014, 9:27 p.m. UTC | #1 
* Roger Quadros <rogerq@ti.com> [140514 00:59]:
> From: Roger Quadros <rogerq@ti.com>
> 
> Add USB pinmux information and USB modes
> for the USB controllers.

Thanks, applying all the .dts changes in this series
into omap-for-v3.16/dt. Using the non-irqbar versions.

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 5babba0..222a7fa 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -93,6 +93,18 @@ 
 			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 		>;
 	};
+
+	usb1_pins: pinmux_usb1_pins {
+                pinctrl-single,pins = <
+			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+                >;
+        };
+
+	usb2_pins: pinmux_usb2_pins {
+                pinctrl-single,pins = <
+			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+                >;
+        };
 };
 
 &i2c1 {
@@ -273,3 +285,15 @@ 
 &cpu0 {
 	cpu0-supply = <&smps123_reg>;
 };
+
+&usb1 {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};