| Message ID | 1529028255-6022-7-git-send-email-zhang.chunyan@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | mmc: add support for sdhci 4.0 | expand |
On 15 June 2018 at 11:36, Chunyan Zhang <zhang.chunyan@linaro.org> wrote: > From: Chunyan Zhang <chunyan.zhang@spreadtrum.com> > > This patch adds the initial support of Secure Digital Host Controller > Interface compliant controller found in some latest Spreadtrum chipsets. > This patch has been tested on the version of SPRD-R11 controller. > > R11 is a variant based on SD v4.0 specification. > > With this driver, R11 mmc can be initialized, can be mounted, read and > written. > > Original-by: Billows Wu <billows.wu@spreadtrum.com> > Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> This looks good to me now! However, I am deferring a bit to let Adrian comment as well. Kind regards Uffe > --- > > Changes from V2: > - Save return value of mmc_of_parse(); > - Add checking for clk_prepare_enable(); > - Use BIT() macro instead. > > --- > drivers/mmc/host/Kconfig | 13 ++ > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/sdhci-sprd.c | 432 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 446 insertions(+) > create mode 100644 drivers/mmc/host/sdhci-sprd.c > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 9589f9c..1b0ee11 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -584,6 +584,19 @@ config MMC_SDRICOH_CS > To compile this driver as a module, choose M here: the > module will be called sdricoh_cs. > > +config MMC_SDHCI_SPRD > + tristate "Spreadtrum SDIO host Controller" > + depends on ARCH_SPRD > + depends on MMC_SDHCI_PLTFM > + select MMC_SDHCI_IO_ACCESSORS > + help > + This selects the SDIO Host Controller in Spreadtrum > + SoCs, this driver supports R11(IP version: R11P0). > + > + If you have a controller with this interface, say Y or M here. > + > + If unsure, say N. > + > config MMC_TMIO_CORE > tristate > > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index 6aead24..5835bc4 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o > obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o > obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o > obj-$(CONFIG_MMC_SDHCI_OMAP) += sdhci-omap.o > +obj-$(CONFIG_MMC_SDHCI_SPRD) += sdhci-sprd.o > obj-$(CONFIG_MMC_CQHCI) += cqhci.o > > ifeq ($(CONFIG_CB710_DEBUG),y) > diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c > new file mode 100644 > index 0000000..2b551c2 > --- /dev/null > +++ b/drivers/mmc/host/sdhci-sprd.c > @@ -0,0 +1,432 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// > +// Secure Digital Host Controller > +// > +// Copyright (C) 2018 Spreadtrum, Inc. > +// Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com> > + > +#include <linux/delay.h> > +#include <linux/dma-mapping.h> > +#include <linux/highmem.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/of_gpio.h> > +#include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > +#include <linux/regulator/consumer.h> > +#include <linux/slab.h> > + > +#include "sdhci-pltfm.h" > + > +#define SDHCI_SPRD_REG_32_DLL_DLY_OFFSET 0x208 > +#define SDHCIBSPRD_IT_WR_DLY_INV BIT(5) > +#define SDHCI_SPRD_BIT_CMD_DLY_INV BIT(13) > +#define SDHCI_SPRD_BIT_POSRD_DLY_INV BIT(21) > +#define SDHCI_SPRD_BIT_NEGRD_DLY_INV BIT(29) > + > +#define SDHCI_SPRD_REG_32_BUSY_POSI 0x250 > +#define SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN BIT(25) > +#define SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN BIT(24) > + > +#define SDHCI_SPRD_REG_DEBOUNCE 0x28C > +#define SDHCI_SPRD_BIT_DLL_BAK BIT(0) > +#define SDHCI_SPRD_BIT_DLL_VAL BIT(1) > + > +#define SDHCI_SPRD_INT_SIGNAL_MASK 0x1B7F410B > + > +/* SDHCI_HOST_CONTROL2 */ > +#define SDHCI_SPRD_CTRL_HS200 0x0005 > +#define SDHCI_SPRD_CTRL_HS400 0x0006 > + > +/* SDHCI_SOFTWARE_RESET */ > +#define SDHCI_HW_RESET_CARD 0x8 /* For Spreadtrum's design */ > + > +#define SDHCI_SPRD_MAX_CUR 0xFFFFFF > +#define SDHCI_SPRD_CLK_MAX_DIV 1023 > + > +#define SDHCI_SPRD_CLK_DEF_RATE 26000000 > + > +struct sdhci_sprd_host { > + u32 version; > + struct clk *clk_sdio; > + struct clk *clk_enable; > + u32 base_rate; > +}; > + > +#define TO_SPRD_HOST(host) sdhci_pltfm_priv(sdhci_priv(host)) > + > +static void sdhci_sprd_init_config(struct sdhci_host *host) > +{ > + u16 val; > + > + /* set 64-bit addressing modes */ > + val = sdhci_readw(host, SDHCI_HOST_CONTROL2); > + val |= SDHCI_CTRL_64BIT_ADDR; > + sdhci_writew(host, val, SDHCI_HOST_CONTROL2); > + > + /* set dll backup mode */ > + val = sdhci_readl(host, SDHCI_SPRD_REG_DEBOUNCE); > + val |= SDHCI_SPRD_BIT_DLL_BAK | SDHCI_SPRD_BIT_DLL_VAL; > + sdhci_writel(host, val, SDHCI_SPRD_REG_DEBOUNCE); > +} > + > +static inline u32 sdhci_sprd_readl(struct sdhci_host *host, int reg) > +{ > + if (unlikely(reg == SDHCI_MAX_CURRENT)) > + return SDHCI_SPRD_MAX_CUR; > + > + return readl_relaxed(host->ioaddr + reg); > +} > + > +static inline void sdhci_sprd_writel(struct sdhci_host *host, u32 val, int reg) > +{ > + /* SDHCI_MAX_CURRENT is reserved on Spreadtrum's platform */ > + if (unlikely(reg == SDHCI_MAX_CURRENT)) > + return; > + > + if (unlikely(reg == SDHCI_SIGNAL_ENABLE || reg == SDHCI_INT_ENABLE)) > + val = val & SDHCI_SPRD_INT_SIGNAL_MASK; > + > + writel_relaxed(val, host->ioaddr + reg); > +} > + > +static inline void sdhci_sprd_writeb(struct sdhci_host *host, u8 val, int reg) > +{ > + if (unlikely(reg == SDHCI_SOFTWARE_RESET)) { > + if (readb_relaxed(host->ioaddr + reg) & SDHCI_HW_RESET_CARD) > + val |= SDHCI_HW_RESET_CARD; > + } > + > + writeb_relaxed(val, host->ioaddr + reg); > +} > + > +static inline void sdhci_sprd_sd_clk_off(struct sdhci_host *host) > +{ > + u16 ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); > + > + ctrl &= ~SDHCI_CLOCK_CARD_EN; > + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); > +} > + > +static inline void > +sdhci_sprd_set_dll_invert(struct sdhci_host *host, u32 mask, bool en) > +{ > + u32 dll_dly_offset; > + > + dll_dly_offset = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET); > + if (en) > + dll_dly_offset |= mask; > + else > + dll_dly_offset &= ~mask; > + sdhci_writel(host, dll_dly_offset, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET); > +} > + > +static inline u32 sdhci_sprd_calc_div(u32 base_clk, u32 clk) > +{ > + u32 div; > + > + /* select 2x clock source */ > + if (base_clk <= clk * 2) > + return 0; > + > + div = (u32) (base_clk / (clk * 2)); > + > + if ((base_clk / div) > (clk * 2)) > + div++; > + > + if (div > SDHCI_SPRD_CLK_MAX_DIV) > + div = SDHCI_SPRD_CLK_MAX_DIV; > + > + if (div % 2) > + div = (div + 1) / 2; > + else > + div = div / 2; > + > + return div; > +} > + > +static inline void _sdhci_sprd_set_clock(struct sdhci_host *host, > + unsigned int clk) > +{ > + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); > + u32 div, val, mask; > + > + div = sdhci_sprd_calc_div(sprd_host->base_rate, clk); > + > + clk |= ((div & 0x300) >> 2) | ((div & 0xFF) << 8); > + sdhci_enable_clk(host, clk); > + > + /* enable auto gate sdhc_enable_auto_gate */ > + val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); > + mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | > + SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN; > + if (mask != (val & mask)) { > + val |= mask; > + sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI); > + } > +} > + > +static void sdhci_sprd_set_clock(struct sdhci_host *host, unsigned int clock) > +{ > + bool en = false; > + > + if (clock == 0) { > + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); > + } else if (clock != host->clock) { > + sdhci_sprd_sd_clk_off(host); > + _sdhci_sprd_set_clock(host, clock); > + > + if (clock <= 400000) > + en = true; > + sdhci_sprd_set_dll_invert(host, SDHCI_SPRD_BIT_CMD_DLY_INV | > + SDHCI_SPRD_BIT_POSRD_DLY_INV, en); > + } else { > + _sdhci_sprd_set_clock(host, clock); > + } > +} > + > +static unsigned int sdhci_sprd_get_max_clock(struct sdhci_host *host) > +{ > + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); > + > + return clk_round_rate(sprd_host->clk_sdio, ULONG_MAX); > +} > + > +static unsigned int sdhci_sprd_get_min_clock(struct sdhci_host *host) > +{ > + return 400000; > +} > + > +static void sdhci_sprd_set_uhs_signaling(struct sdhci_host *host, > + unsigned int timing) > +{ > + u16 ctrl_2; > + > + if (timing == host->timing) > + return; > + > + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); > + /* Select Bus Speed Mode for host */ > + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; > + switch (timing) { > + case MMC_TIMING_UHS_SDR12: > + ctrl_2 = SDHCI_CTRL_UHS_SDR12; > + break; > + case MMC_TIMING_MMC_HS: > + case MMC_TIMING_SD_HS: > + case MMC_TIMING_UHS_SDR25: > + ctrl_2 = SDHCI_CTRL_UHS_SDR25; > + break; > + case MMC_TIMING_UHS_SDR50: > + ctrl_2 = SDHCI_CTRL_UHS_SDR50; > + break; > + case MMC_TIMING_UHS_SDR104: > + ctrl_2 = SDHCI_CTRL_UHS_SDR104; > + break; > + case MMC_TIMING_UHS_DDR50: > + case MMC_TIMING_MMC_DDR52: > + ctrl_2 = SDHCI_CTRL_UHS_DDR50; > + break; > + case MMC_TIMING_MMC_HS200: > + ctrl_2 = SDHCI_SPRD_CTRL_HS200; > + break; > + case MMC_TIMING_MMC_HS400: > + ctrl_2 = SDHCI_SPRD_CTRL_HS400; > + break; > + default: > + break; > + } > + > + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); > +} > + > +static void sdhci_sprd_hw_reset(struct sdhci_host *host) > +{ > + int val; > + > + /* Note: don't use sdhci_readb/writeb() API here */ > + val = readb_relaxed(host->ioaddr + SDHCI_SOFTWARE_RESET); > + val &= ~SDHCI_HW_RESET_CARD; > + writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET); > + udelay(10); > + > + val |= SDHCI_HW_RESET_CARD; > + writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET); > + udelay(300); > +} > + > +static struct sdhci_ops sdhci_sprd_ops = { > + .read_l = sdhci_sprd_readl, > + .write_l = sdhci_sprd_writel, > + .write_b = sdhci_sprd_writeb, > + .set_clock = sdhci_sprd_set_clock, > + .get_max_clock = sdhci_sprd_get_max_clock, > + .get_min_clock = sdhci_sprd_get_min_clock, > + .set_bus_width = sdhci_set_bus_width, > + .reset = sdhci_reset, > + .set_uhs_signaling = sdhci_sprd_set_uhs_signaling, > + .hw_reset = sdhci_sprd_hw_reset, > +}; > + > +static const struct sdhci_pltfm_data sdhci_sprd_pdata = { > + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, > + .quirks2 = SDHCI_QUIRK2_BROKEN_HS200, > + .ops = &sdhci_sprd_ops, > +}; > + > +static int sdhci_sprd_probe(struct platform_device *pdev) > +{ > + struct sdhci_host *host; > + struct sdhci_sprd_host *sprd_host; > + struct clk *clk; > + int ret = 0; > + > + host = sdhci_pltfm_init(pdev, &sdhci_sprd_pdata, sizeof(*sprd_host)); > + if (IS_ERR(host)) > + return PTR_ERR(host); > + > + host->dma_mask = DMA_BIT_MASK(64); > + pdev->dev.dma_mask = &host->dma_mask; > + > + host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | > + MMC_CAP_ERASE | MMC_CAP_CMD23; > + ret = mmc_of_parse(host->mmc); > + if (ret) > + goto pltfm_free; > + > + sprd_host = TO_SPRD_HOST(host); > + > + clk = devm_clk_get(&pdev->dev, "sdio"); > + if (IS_ERR(clk)) { > + ret = PTR_ERR(clk); > + goto pltfm_free; > + } > + sprd_host->clk_sdio = clk; > + sprd_host->base_rate = clk_get_rate(sprd_host->clk_sdio); > + if (!sprd_host->base_rate) > + sprd_host->base_rate = SDHCI_SPRD_CLK_DEF_RATE; > + > + clk = devm_clk_get(&pdev->dev, "enable"); > + if (IS_ERR(clk)) { > + ret = PTR_ERR(clk); > + goto pltfm_free; > + } > + sprd_host->clk_enable = clk; > + > + ret = clk_prepare_enable(sprd_host->clk_sdio); > + if (ret) > + goto pltfm_free; > + > + clk_prepare_enable(sprd_host->clk_enable); > + if (ret) > + goto clk_disable; > + > + sdhci_sprd_init_config(host); > + > + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); > + sprd_host->version = ((host->version & SDHCI_VENDOR_VER_MASK) >> > + SDHCI_VENDOR_VER_SHIFT); > + > + pm_runtime_get_noresume(&pdev->dev); > + pm_runtime_set_active(&pdev->dev); > + pm_runtime_enable(&pdev->dev); > + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); > + pm_runtime_use_autosuspend(&pdev->dev); > + pm_suspend_ignore_children(&pdev->dev, 1); > + > + ret = sdhci_add_host(host); > + if (ret) { > + dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret); > + goto pm_runtime_disable; > + } > + > + pm_runtime_mark_last_busy(&pdev->dev); > + pm_runtime_put_autosuspend(&pdev->dev); > + > + return 0; > + > +pm_runtime_disable: > + pm_runtime_disable(&pdev->dev); > + pm_runtime_set_suspended(&pdev->dev); > + > + clk_disable_unprepare(sprd_host->clk_enable); > + > +clk_disable: > + clk_disable_unprepare(sprd_host->clk_sdio); > + > +pltfm_free: > + sdhci_pltfm_free(pdev); > + return ret; > +} > + > +static int sdhci_sprd_remove(struct platform_device *pdev) > +{ > + struct sdhci_host *host = platform_get_drvdata(pdev); > + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); > + struct mmc_host *mmc = host->mmc; > + > + mmc_remove_host(mmc); > + clk_disable_unprepare(sprd_host->clk_sdio); > + clk_disable_unprepare(sprd_host->clk_enable); > + > + mmc_free_host(mmc); > + > + return 0; > +} > + > +static const struct of_device_id sdhci_sprd_of_match[] = { > + { .compatible = "sprd,sdhci-r11", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, sdhci_sprd_of_match); > + > +#ifdef CONFIG_PM > +static int sdhci_sprd_runtime_suspend(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); > + > + sdhci_runtime_suspend_host(host); > + > + clk_disable_unprepare(sprd_host->clk_sdio); > + clk_disable_unprepare(sprd_host->clk_enable); > + > + return 0; > +} > + > +static int sdhci_sprd_runtime_resume(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); > + > + clk_prepare_enable(sprd_host->clk_enable); > + clk_prepare_enable(sprd_host->clk_sdio); > + > + sdhci_runtime_resume_host(host); > + > + return 0; > +} > +#endif > + > +static const struct dev_pm_ops sdhci_sprd_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > + pm_runtime_force_resume) > + SET_RUNTIME_PM_OPS(sdhci_sprd_runtime_suspend, > + sdhci_sprd_runtime_resume, NULL) > +}; > + > +static struct platform_driver sdhci_sprd_driver = { > + .probe = sdhci_sprd_probe, > + .remove = sdhci_sprd_remove, > + .driver = { > + .name = "sdhci_sprd_r11", > + .of_match_table = of_match_ptr(sdhci_sprd_of_match), > + .pm = &sdhci_sprd_pm_ops, > + }, > +}; > +module_platform_driver(sdhci_sprd_driver); > + > +MODULE_DESCRIPTION("Spreadtrum sdio host controller r11 driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:sdhci-sprd-r11"); > -- > 2.7.4 >
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 9589f9c..1b0ee11 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -584,6 +584,19 @@ config MMC_SDRICOH_CS To compile this driver as a module, choose M here: the module will be called sdricoh_cs. +config MMC_SDHCI_SPRD + tristate "Spreadtrum SDIO host Controller" + depends on ARCH_SPRD + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the SDIO Host Controller in Spreadtrum + SoCs, this driver supports R11(IP version: R11P0). + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_TMIO_CORE tristate diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 6aead24..5835bc4 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o obj-$(CONFIG_MMC_SDHCI_OMAP) += sdhci-omap.o +obj-$(CONFIG_MMC_SDHCI_SPRD) += sdhci-sprd.o obj-$(CONFIG_MMC_CQHCI) += cqhci.o ifeq ($(CONFIG_CB710_DEBUG),y) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c new file mode 100644 index 0000000..f1b0f2b --- /dev/null +++ b/drivers/mmc/host/sdhci-sprd.c @@ -0,0 +1,426 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Secure Digital Host Controller +// +// Copyright (C) 2018 Spreadtrum, Inc. +// Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com> + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/highmem.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +#include "sdhci-pltfm.h" + +#define SDHCI_SPRD_REG_32_DLL_DLY_OFFSET 0x208 +#define SDHCIBSPRD_IT_WR_DLY_INV (1 << 5) +#define SDHCI_SPRD_BIT_CMD_DLY_INV (1 << 13) +#define SDHCI_SPRD_BIT_POSRD_DLY_INV (1 << 21) +#define SDHCI_SPRD_BIT_NEGRD_DLY_INV (1 << 29) + +#define SDHCI_SPRD_REG_32_BUSY_POSI 0x250 +#define SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN (1 << 25) +#define SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN (1 << 24) + +#define SDHCI_SPRD_REG_DEBOUNCE 0x28C +#define SDHCI_SPRD_BIT_DLL_BAK (1 << 0) +#define SDHCI_SPRD_BIT_DLL_VAL (1 << 1) + +#define SDHCI_SPRD_INT_SIGNAL_MASK 0x1B7F410B + +/* SDHCI_HOST_CONTROL2 */ +#define SDHCI_SPRD_CTRL_HS200 0x0005 +#define SDHCI_SPRD_CTRL_HS400 0x0006 + +/* SDHCI_SOFTWARE_RESET */ +#define SDHCI_HW_RESET_CARD 0x8 /* For Spreadtrum's design */ + +#define SDHCI_SPRD_MAX_CUR 0xFFFFFF +#define SDHCI_SPRD_CLK_MAX_DIV 0x3FF + +#define SDHCI_SPRD_CLK_DEF_RATE 26000000 + +struct sdhci_sprd_host { + u32 version; + struct clk *clk_sdio; + struct clk *clk_enable; + u32 base_rate; +}; + +#define TO_SPRD_HOST(host) sdhci_pltfm_priv(sdhci_priv(host)) + +static void sdhci_sprd_init_config(struct sdhci_host *host) +{ + u16 val; + + /* set 64-bit addressing modes */ + val = sdhci_readw(host, SDHCI_HOST_CONTROL2); + val |= SDHCI_CTRL_64BIT_ADDR; + sdhci_writew(host, val, SDHCI_HOST_CONTROL2); + + /* set dll backup mode */ + val = sdhci_readl(host, SDHCI_SPRD_REG_DEBOUNCE); + val |= SDHCI_SPRD_BIT_DLL_BAK | SDHCI_SPRD_BIT_DLL_VAL; + sdhci_writel(host, val, SDHCI_SPRD_REG_DEBOUNCE); +} + +static inline u32 sdhci_sprd_readl(struct sdhci_host *host, int reg) +{ + if (unlikely(reg == SDHCI_MAX_CURRENT)) + return SDHCI_SPRD_MAX_CUR; + + return readl_relaxed(host->ioaddr + reg); +} + +static inline void sdhci_sprd_writel(struct sdhci_host *host, u32 val, int reg) +{ + /* SDHCI_MAX_CURRENT is reserved on Spreadtrum's platform */ + if (unlikely(reg == SDHCI_MAX_CURRENT)) + return; + + if (unlikely(reg == SDHCI_SIGNAL_ENABLE || reg == SDHCI_INT_ENABLE)) + val = val & SDHCI_SPRD_INT_SIGNAL_MASK; + + return writel_relaxed(val, host->ioaddr + reg); +} + +static inline void sdhci_sprd_writeb(struct sdhci_host *host, u8 val, int reg) +{ + if (unlikely(reg == SDHCI_SOFTWARE_RESET)) { + if (readb_relaxed(host->ioaddr + reg) & SDHCI_HW_RESET_CARD) + val |= SDHCI_HW_RESET_CARD; + } + + return writeb_relaxed(val, host->ioaddr + reg); +} + +static inline void sdhci_sprd_sd_clk_off(struct sdhci_host *host) +{ + u16 ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + + ctrl &= (~SDHCI_CLOCK_CARD_EN); + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); +} + +static inline void +sdhci_sprd_set_dll_invert(struct sdhci_host *host, u32 mask, bool en) +{ + u32 dll_dly_offset; + + dll_dly_offset = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET); + if (en) + dll_dly_offset |= mask; + else + dll_dly_offset &= ~mask; + sdhci_writel(host, dll_dly_offset, SDHCI_SPRD_REG_32_DLL_DLY_OFFSET); +} + +static inline u32 sdhci_sprd_calc_div(u32 base_clk, u32 clk) +{ + u32 div; + + /* select 2x clock source */ + if (base_clk <= clk * 2) + return 0; + + div = (u32) (base_clk / (clk * 2)); + + if ((base_clk / div) > (clk * 2)) + div++; + + if (div > SDHCI_SPRD_CLK_MAX_DIV) + div = SDHCI_SPRD_CLK_MAX_DIV; + + if (div % 2) + div = (div + 1) / 2; + else + div = div / 2; + + return div; +} + +static inline void _sdhci_sprd_set_clock(struct sdhci_host *host, + unsigned int clk) +{ + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + u32 div, val, mask; + + div = sdhci_sprd_calc_div(sprd_host->base_rate, clk); + + clk |= ((div & 0x300) >> 2) | ((div & 0xFF) << 8); + sdhci_enable_clk(host, clk); + + /* enable auto gate sdhc_enable_auto_gate */ + val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); + mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | + SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN; + if (mask != (val & mask)) { + val |= mask; + sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI); + } +} + +static void sdhci_sprd_set_clock(struct sdhci_host *host, unsigned int clock) +{ + bool en = false; + + if (clock == 0) { + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + } else if (clock != host->clock) { + sdhci_sprd_sd_clk_off(host); + _sdhci_sprd_set_clock(host, clock); + + if (clock <= 400000) + en = true; + sdhci_sprd_set_dll_invert(host, SDHCI_SPRD_BIT_CMD_DLY_INV | + SDHCI_SPRD_BIT_POSRD_DLY_INV, en); + } else { + _sdhci_sprd_set_clock(host, clock); + } + +} + +static unsigned int sdhci_sprd_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + + return clk_round_rate(sprd_host->clk_sdio, ULONG_MAX); +} + +static unsigned int sdhci_sprd_get_min_clock(struct sdhci_host *host) +{ + return 400000; +} + +static void sdhci_sprd_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + u16 ctrl_2; + + if (timing == host->timing) + return; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (timing) { + case MMC_TIMING_UHS_SDR12: + ctrl_2 = SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + ctrl_2 = SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + ctrl_2 = SDHCI_CTRL_UHS_SDR50; + break; + case MMC_TIMING_UHS_SDR104: + ctrl_2 = SDHCI_CTRL_UHS_SDR104; + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + ctrl_2 = SDHCI_CTRL_UHS_DDR50; + break; + case MMC_TIMING_MMC_HS200: + ctrl_2 = SDHCI_SPRD_CTRL_HS200; + break; + case MMC_TIMING_MMC_HS400: + ctrl_2 = SDHCI_SPRD_CTRL_HS400; + break; + default: + break; + } + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static void sdhci_sprd_hw_reset(struct sdhci_host *host) +{ + int val; + + /* Note: don't use sdhci_readb/writeb() API here */ + val = readb_relaxed(host->ioaddr + SDHCI_SOFTWARE_RESET); + val &= ~SDHCI_HW_RESET_CARD; + writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET); + udelay(10); + + val |= SDHCI_HW_RESET_CARD; + writeb_relaxed(val, host->ioaddr + SDHCI_SOFTWARE_RESET); + udelay(300); +} + +static struct sdhci_ops sdhci_sprd_ops = { + .read_l = sdhci_sprd_readl, + .write_l = sdhci_sprd_writel, + .write_b = sdhci_sprd_writeb, + .set_clock = sdhci_sprd_set_clock, + .get_max_clock = sdhci_sprd_get_max_clock, + .get_min_clock = sdhci_sprd_get_min_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_sprd_set_uhs_signaling, + .hw_reset = sdhci_sprd_hw_reset, +}; + +static const struct sdhci_pltfm_data sdhci_sprd_pdata = { + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, + .quirks2 = SDHCI_QUIRK2_BROKEN_HS200, + .ops = &sdhci_sprd_ops, +}; + +static int sdhci_sprd_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_sprd_host *sprd_host; + struct clk *clk; + int ret = 0; + + host = sdhci_pltfm_init(pdev, &sdhci_sprd_pdata, sizeof(*sprd_host)); + if (IS_ERR(host)) + return PTR_ERR(host); + + host->dma_mask = DMA_BIT_MASK(64); + pdev->dev.dma_mask = &host->dma_mask; + + host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_ERASE | MMC_CAP_CMD23; + mmc_of_parse(host->mmc); + if (ret) + goto pltfm_free; + + sprd_host = TO_SPRD_HOST(host); + + clk = devm_clk_get(&pdev->dev, "sdio"); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto pltfm_free; + } + sprd_host->clk_sdio = clk; + sprd_host->base_rate = clk_get_rate(sprd_host->clk_sdio); + if (!sprd_host->base_rate) + sprd_host->base_rate = SDHCI_SPRD_CLK_DEF_RATE; + + clk = devm_clk_get(&pdev->dev, "enable"); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto pltfm_free; + } + sprd_host->clk_enable = clk; + + clk_prepare_enable(sprd_host->clk_sdio); + clk_prepare_enable(sprd_host->clk_enable); + + sdhci_sprd_init_config(host); + + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + sprd_host->version = ((host->version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT); + + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "failed to add mmc host: %d\n", ret); + goto pm_runtime_disable; + } + + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + + return 0; + +pm_runtime_disable: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + + clk_disable_unprepare(sprd_host->clk_sdio); + clk_disable_unprepare(sprd_host->clk_enable); + +pltfm_free: + sdhci_pltfm_free(pdev); + return ret; +} + +static int sdhci_sprd_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + struct mmc_host *mmc = host->mmc; + + mmc_remove_host(mmc); + clk_disable_unprepare(sprd_host->clk_sdio); + clk_disable_unprepare(sprd_host->clk_enable); + + mmc_free_host(mmc); + + return 0; +} + +static const struct of_device_id sdhci_sprd_of_match[] = { + { .compatible = "sprd,sdhci-r11", }, + { } +}; +MODULE_DEVICE_TABLE(of, sdhci_sprd_of_match); + +#ifdef CONFIG_PM +static int sdhci_sprd_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + + sdhci_runtime_suspend_host(host); + + clk_disable_unprepare(sprd_host->clk_sdio); + clk_disable_unprepare(sprd_host->clk_enable); + + return 0; +} + +static int sdhci_sprd_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + + clk_prepare_enable(sprd_host->clk_enable); + clk_prepare_enable(sprd_host->clk_sdio); + + sdhci_runtime_resume_host(host); + + return 0; +} +#endif + +static const struct dev_pm_ops sdhci_sprd_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(sdhci_sprd_runtime_suspend, + sdhci_sprd_runtime_resume, NULL) +}; + +static struct platform_driver sdhci_sprd_driver = { + .probe = sdhci_sprd_probe, + .remove = sdhci_sprd_remove, + .driver = { + .name = "sdhci_sprd_r11", + .of_match_table = of_match_ptr(sdhci_sprd_of_match), + .pm = &sdhci_sprd_pm_ops, + }, +}; +module_platform_driver(sdhci_sprd_driver); + +MODULE_DESCRIPTION("Spreadtrum sdio host controller r11 driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sdhci-sprd-r11");