[2/4] thunderbolt: No need to warn if NHI hop_count != 12 or hop_count != 32

Message ID 20200615130139.83854-3-mika.westerberg@linux.intel.com
State New
Headers show
Series
  • Untitled series #39592
Related show

Commit Message

Mika Westerberg June 15, 2020, 1:01 p.m.
While Intel hardware typically has hop_count (Total Paths in the spec)
12 the USB4 spec allows this to be anything between 1 and 21 so no need
to warn about this. Simply log number of paths at debug level.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/thunderbolt/nhi.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

Patch

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index d299dc168147..b617922b5b0a 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -1123,9 +1123,7 @@  static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* cannot fail - table is allocated bin pcim_iomap_regions */
 	nhi->iobase = pcim_iomap_table(pdev)[0];
 	nhi->hop_count = ioread32(nhi->iobase + REG_HOP_COUNT) & 0x3ff;
-	if (nhi->hop_count != 12 && nhi->hop_count != 32)
-		dev_warn(&pdev->dev, "unexpected hop count: %d\n",
-			 nhi->hop_count);
+	dev_dbg(&pdev->dev, "total paths: %d\n", nhi->hop_count);
 
 	nhi->tx_rings = devm_kcalloc(&pdev->dev, nhi->hop_count,
 				     sizeof(*nhi->tx_rings), GFP_KERNEL);