diff mbox series

[v5,05/16] arm64: dts: rk3399: Move u2phy into root port

Message ID 20200513071546.5560-1-frank.wang@rock-chips.com
State New
Headers show
Series Add Rockchip RK3399 USB3.0 Host support | expand

Commit Message

Frank Wang May 13, 2020, 7:15 a.m. UTC
From: Jagan Teki <jagan at amarulasolutions.com>

Yes, This is changing the actual device tree u2phy
structure but the problem with the current Generic
PHY subsystem is unable to find PHY if the PHY node
is not part of the root structure.

This will be reverted,
- Once we support the PHY subsystem to get the PHY
  even though it is not part of the root node or
- any other relevant solution that get the phy
  directly without traversing all nodes.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 arch/arm/dts/rk3399.dtsi | 108 +++++++++++++++++++--------------------
 1 file changed, 54 insertions(+), 54 deletions(-)

Comments

Kever Yang May 15, 2020, 2:40 a.m. UTC | #1
Hi Jagan, Frank,

On 2020/5/13 ??3:15, Frank Wang wrote:
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> Yes, This is changing the actual device tree u2phy
> structure but the problem with the current Generic
> PHY subsystem is unable to find PHY if the PHY node
> is not part of the root structure.

I don't understand for this, it should be able to bind the device when

dm scan fdt.

Rockchip code always can use this node directly without modify, could

you check again?


Thanks,

- Kever

>
> This will be reverted,
> - Once we support the PHY subsystem to get the PHY
>    even though it is not part of the root node or
> - any other relevant solution that get the phy
>    directly without traversing all nodes.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>   arch/arm/dts/rk3399.dtsi | 108 +++++++++++++++++++--------------------
>   1 file changed, 54 insertions(+), 54 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
> index 74f2c3d490..6c77f25f23 100644
> --- a/arch/arm/dts/rk3399.dtsi
> +++ b/arch/arm/dts/rk3399.dtsi
> @@ -1387,60 +1387,6 @@
>   			status = "disabled";
>   		};
>   
> -		u2phy0: usb2-phy at e450 {
> -			compatible = "rockchip,rk3399-usb2phy";
> -			reg = <0xe450 0x10>;
> -			clocks = <&cru SCLK_USB2PHY0_REF>;
> -			clock-names = "phyclk";
> -			#clock-cells = <0>;
> -			clock-output-names = "clk_usbphy0_480m";
> -			status = "disabled";
> -
> -			u2phy0_host: host-port {
> -				#phy-cells = <0>;
> -				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
> -				interrupt-names = "linestate";
> -				status = "disabled";
> -			};
> -
> -			u2phy0_otg: otg-port {
> -				#phy-cells = <0>;
> -				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
> -					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
> -					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
> -				interrupt-names = "otg-bvalid", "otg-id",
> -						  "linestate";
> -				status = "disabled";
> -			};
> -		};
> -
> -		u2phy1: usb2-phy at e460 {
> -			compatible = "rockchip,rk3399-usb2phy";
> -			reg = <0xe460 0x10>;
> -			clocks = <&cru SCLK_USB2PHY1_REF>;
> -			clock-names = "phyclk";
> -			#clock-cells = <0>;
> -			clock-output-names = "clk_usbphy1_480m";
> -			status = "disabled";
> -
> -			u2phy1_host: host-port {
> -				#phy-cells = <0>;
> -				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
> -				interrupt-names = "linestate";
> -				status = "disabled";
> -			};
> -
> -			u2phy1_otg: otg-port {
> -				#phy-cells = <0>;
> -				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
> -					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
> -					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
> -				interrupt-names = "otg-bvalid", "otg-id",
> -						  "linestate";
> -				status = "disabled";
> -			};
> -		};
> -
>   		emmc_phy: phy at f780 {
>   			compatible = "rockchip,rk3399-emmc-phy";
>   			reg = <0xf780 0x24>;
> @@ -1462,6 +1408,60 @@
>   		};
>   	};
>   
> +	u2phy0: usb2-phy at e450 {
> +		compatible = "rockchip,rk3399-usb2phy";
> +		reg = <0x0 0xe450 0x0 0x10>;
> +		clocks = <&cru SCLK_USB2PHY0_REF>;
> +		clock-names = "phyclk";
> +		#clock-cells = <0>;
> +		clock-output-names = "clk_usbphy0_480m";
> +		status = "disabled";
> +
> +		u2phy0_host: host-port {
> +			#phy-cells = <0>;
> +			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
> +			interrupt-names = "linestate";
> +			status = "disabled";
> +		};
> +
> +		u2phy0_otg: otg-port {
> +			#phy-cells = <0>;
> +			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
> +				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
> +				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
> +			interrupt-names = "otg-bvalid", "otg-id",
> +					  "linestate";
> +			status = "disabled";
> +		};
> +	};
> +
> +	u2phy1: usb2-phy at e460 {
> +		compatible = "rockchip,rk3399-usb2phy";
> +		reg = <0x0 0xe460 0x0 0x10>;
> +		clocks = <&cru SCLK_USB2PHY1_REF>;
> +		clock-names = "phyclk";
> +		#clock-cells = <0>;
> +		clock-output-names = "clk_usbphy1_480m";
> +		status = "disabled";
> +
> +		u2phy1_host: host-port {
> +			#phy-cells = <0>;
> +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
> +			interrupt-names = "linestate";
> +			status = "disabled";
> +		};
> +
> +		u2phy1_otg: otg-port {
> +			#phy-cells = <0>;
> +			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
> +				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
> +				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
> +			interrupt-names = "otg-bvalid", "otg-id",
> +					  "linestate";
> +			status = "disabled";
> +		};
> +	};
> +
>   	tcphy0: phy at ff7c0000 {
>   		compatible = "rockchip,rk3399-typec-phy";
>   		reg = <0x0 0xff7c0000 0x0 0x40000>;
Frank Wang May 26, 2020, 3:49 a.m. UTC | #2
Hi Jagan, Kever,

On 2020/5/15 10:40, Kever Yang wrote:
> Hi Jagan, Frank,
>
> On 2020/5/13 ??3:15, Frank Wang wrote:
>> From: Jagan Teki <jagan at amarulasolutions.com>
>>
>> Yes, This is changing the actual device tree u2phy
>> structure but the problem with the current Generic
>> PHY subsystem is unable to find PHY if the PHY node
>> is not part of the root structure.
>
> I don't understand for this, it should be able to bind the device when
>
> dm scan fdt.
>
> Rockchip code always can use this node directly without modify, could
>
> you check again?
>

Sub-nodes under grf were not scanned recursively since dm_scan_fdt_dev 
is not assigned to rk3399_syscon driver's bind in Upstream codes .

I have fixed it and updated all changed for patch v6, please refer to 
below links.

https://patchwork.ozlabs.org/project/uboot/cover/20200526033220.20047-1-frank.wang at rock-chips.com/


BR,
Frank

> Thanks,
>
> - Kever
>
>>
>> This will be reverted,
>> - Once we support the PHY subsystem to get the PHY
>> ?? even though it is not part of the root node or
>> - any other relevant solution that get the phy
>> ?? directly without traversing all nodes.
>>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>> ---
>> ? arch/arm/dts/rk3399.dtsi | 108 +++++++++++++++++++--------------------
>> ? 1 file changed, 54 insertions(+), 54 deletions(-)
>>
>> diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
>> index 74f2c3d490..6c77f25f23 100644
>> --- a/arch/arm/dts/rk3399.dtsi
>> +++ b/arch/arm/dts/rk3399.dtsi
>> @@ -1387,60 +1387,6 @@
>> ????????????? status = "disabled";
>> ????????? };
>> ? -??????? u2phy0: usb2-phy at e450 {
>> -??????????? compatible = "rockchip,rk3399-usb2phy";
>> -??????????? reg = <0xe450 0x10>;
>> -??????????? clocks = <&cru SCLK_USB2PHY0_REF>;
>> -??????????? clock-names = "phyclk";
>> -??????????? #clock-cells = <0>;
>> -??????????? clock-output-names = "clk_usbphy0_480m";
>> -??????????? status = "disabled";
>> -
>> -??????????? u2phy0_host: host-port {
>> -??????????????? #phy-cells = <0>;
>> -??????????????? interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
>> -??????????????? interrupt-names = "linestate";
>> -??????????????? status = "disabled";
>> -??????????? };
>> -
>> -??????????? u2phy0_otg: otg-port {
>> -??????????????? #phy-cells = <0>;
>> -??????????????? interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
>> -???????????????????????? <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
>> -???????????????????????? <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
>> -??????????????? interrupt-names = "otg-bvalid", "otg-id",
>> -????????????????????????? "linestate";
>> -??????????????? status = "disabled";
>> -??????????? };
>> -??????? };
>> -
>> -??????? u2phy1: usb2-phy at e460 {
>> -??????????? compatible = "rockchip,rk3399-usb2phy";
>> -??????????? reg = <0xe460 0x10>;
>> -??????????? clocks = <&cru SCLK_USB2PHY1_REF>;
>> -??????????? clock-names = "phyclk";
>> -??????????? #clock-cells = <0>;
>> -??????????? clock-output-names = "clk_usbphy1_480m";
>> -??????????? status = "disabled";
>> -
>> -??????????? u2phy1_host: host-port {
>> -??????????????? #phy-cells = <0>;
>> -??????????????? interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
>> -??????????????? interrupt-names = "linestate";
>> -??????????????? status = "disabled";
>> -??????????? };
>> -
>> -??????????? u2phy1_otg: otg-port {
>> -??????????????? #phy-cells = <0>;
>> -??????????????? interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
>> -???????????????????????? <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
>> -???????????????????????? <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
>> -??????????????? interrupt-names = "otg-bvalid", "otg-id",
>> -????????????????????????? "linestate";
>> -??????????????? status = "disabled";
>> -??????????? };
>> -??????? };
>> -
>> ????????? emmc_phy: phy at f780 {
>> ????????????? compatible = "rockchip,rk3399-emmc-phy";
>> ????????????? reg = <0xf780 0x24>;
>> @@ -1462,6 +1408,60 @@
>> ????????? };
>> ????? };
>> ? +??? u2phy0: usb2-phy at e450 {
>> +??????? compatible = "rockchip,rk3399-usb2phy";
>> +??????? reg = <0x0 0xe450 0x0 0x10>;
>> +??????? clocks = <&cru SCLK_USB2PHY0_REF>;
>> +??????? clock-names = "phyclk";
>> +??????? #clock-cells = <0>;
>> +??????? clock-output-names = "clk_usbphy0_480m";
>> +??????? status = "disabled";
>> +
>> +??????? u2phy0_host: host-port {
>> +??????????? #phy-cells = <0>;
>> +??????????? interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
>> +??????????? interrupt-names = "linestate";
>> +??????????? status = "disabled";
>> +??????? };
>> +
>> +??????? u2phy0_otg: otg-port {
>> +??????????? #phy-cells = <0>;
>> +??????????? interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
>> +???????????????????? <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
>> +???????????????????? <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
>> +??????????? interrupt-names = "otg-bvalid", "otg-id",
>> +????????????????????? "linestate";
>> +??????????? status = "disabled";
>> +??????? };
>> +??? };
>> +
>> +??? u2phy1: usb2-phy at e460 {
>> +??????? compatible = "rockchip,rk3399-usb2phy";
>> +??????? reg = <0x0 0xe460 0x0 0x10>;
>> +??????? clocks = <&cru SCLK_USB2PHY1_REF>;
>> +??????? clock-names = "phyclk";
>> +??????? #clock-cells = <0>;
>> +??????? clock-output-names = "clk_usbphy1_480m";
>> +??????? status = "disabled";
>> +
>> +??????? u2phy1_host: host-port {
>> +??????????? #phy-cells = <0>;
>> +??????????? interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
>> +??????????? interrupt-names = "linestate";
>> +??????????? status = "disabled";
>> +??????? };
>> +
>> +??????? u2phy1_otg: otg-port {
>> +??????????? #phy-cells = <0>;
>> +??????????? interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
>> +???????????????????? <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
>> +???????????????????? <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
>> +??????????? interrupt-names = "otg-bvalid", "otg-id",
>> +????????????????????? "linestate";
>> +??????????? status = "disabled";
>> +??????? };
>> +??? };
>> +
>> ????? tcphy0: phy at ff7c0000 {
>> ????????? compatible = "rockchip,rk3399-typec-phy";
>> ????????? reg = <0x0 0xff7c0000 0x0 0x40000>;
>
>
diff mbox series

Patch

diff --git a/arch/arm/dts/rk3399.dtsi b/arch/arm/dts/rk3399.dtsi
index 74f2c3d490..6c77f25f23 100644
--- a/arch/arm/dts/rk3399.dtsi
+++ b/arch/arm/dts/rk3399.dtsi
@@ -1387,60 +1387,6 @@ 
 			status = "disabled";
 		};
 
-		u2phy0: usb2-phy at e450 {
-			compatible = "rockchip,rk3399-usb2phy";
-			reg = <0xe450 0x10>;
-			clocks = <&cru SCLK_USB2PHY0_REF>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-			clock-output-names = "clk_usbphy0_480m";
-			status = "disabled";
-
-			u2phy0_host: host-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "linestate";
-				status = "disabled";
-			};
-
-			u2phy0_otg: otg-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "otg-bvalid", "otg-id",
-						  "linestate";
-				status = "disabled";
-			};
-		};
-
-		u2phy1: usb2-phy at e460 {
-			compatible = "rockchip,rk3399-usb2phy";
-			reg = <0xe460 0x10>;
-			clocks = <&cru SCLK_USB2PHY1_REF>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-			clock-output-names = "clk_usbphy1_480m";
-			status = "disabled";
-
-			u2phy1_host: host-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "linestate";
-				status = "disabled";
-			};
-
-			u2phy1_otg: otg-port {
-				#phy-cells = <0>;
-				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
-					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
-				interrupt-names = "otg-bvalid", "otg-id",
-						  "linestate";
-				status = "disabled";
-			};
-		};
-
 		emmc_phy: phy at f780 {
 			compatible = "rockchip,rk3399-emmc-phy";
 			reg = <0xf780 0x24>;
@@ -1462,6 +1408,60 @@ 
 		};
 	};
 
+	u2phy0: usb2-phy at e450 {
+		compatible = "rockchip,rk3399-usb2phy";
+		reg = <0x0 0xe450 0x0 0x10>;
+		clocks = <&cru SCLK_USB2PHY0_REF>;
+		clock-names = "phyclk";
+		#clock-cells = <0>;
+		clock-output-names = "clk_usbphy0_480m";
+		status = "disabled";
+
+		u2phy0_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "linestate";
+			status = "disabled";
+		};
+
+		u2phy0_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "otg-bvalid", "otg-id",
+					  "linestate";
+			status = "disabled";
+		};
+	};
+
+	u2phy1: usb2-phy at e460 {
+		compatible = "rockchip,rk3399-usb2phy";
+		reg = <0x0 0xe460 0x0 0x10>;
+		clocks = <&cru SCLK_USB2PHY1_REF>;
+		clock-names = "phyclk";
+		#clock-cells = <0>;
+		clock-output-names = "clk_usbphy1_480m";
+		status = "disabled";
+
+		u2phy1_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "linestate";
+			status = "disabled";
+		};
+
+		u2phy1_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "otg-bvalid", "otg-id",
+					  "linestate";
+			status = "disabled";
+		};
+	};
+
 	tcphy0: phy at ff7c0000 {
 		compatible = "rockchip,rk3399-typec-phy";
 		reg = <0x0 0xff7c0000 0x0 0x40000>;