| Message ID | 20201023214328.1262883-2-pmalani@chromium.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/2] usb: typec: Consolidate syfs ABI documentation | expand |
Hi All, Was wondering if there were any comments on v3 of this series? Best regards, -Prashant On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > A PD-capable device can return up to 3 Product Type VDOs as part of its > DiscoverIdentity Response (USB PD Spec, Rev 3.0, Version 2.0, Section > 6.4.4.3.1). Add sysfs attributes to expose these to userspace. > > Cc: Benson Leung <bleung@chromium.org> > Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> > Signed-off-by: Prashant Malani <pmalani@chromium.org> > ---
On Wed, Nov 04, 2020 at 09:49:17AM -0800, Prashant Malani wrote: > Hi All, > > Was wondering if there were any comments on v3 of this series? Sorry to keep you waiting with this... I'm still wondering if the patch 2/2 is what we should use. Right now I don't have really any better ideas. But give the rest of the week to think about this. thanks, -- heikki
On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > A PD-capable device can return up to 3 Product Type VDOs as part of its > DiscoverIdentity Response (USB PD Spec, Rev 3.0, Version 2.0, Section > 6.4.4.3.1). Add sysfs attributes to expose these to userspace. > > Cc: Benson Leung <bleung@chromium.org> > Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> > Signed-off-by: Prashant Malani <pmalani@chromium.org> > --- > > Changes in v3: > - Split each product type VDO into a separate attribute. > - Changed sprintf() to sysfs_emit(). > - Changed ABI documentation based on consolidation of identity VDO > descriptions in the previous patch (1/2). > > Changes in v2: > - Added sysfs_notify() call for the attribute. > - Added description for the attribute in > Documentation/ABI/testing/sysfs-class-typec. > > Documentation/ABI/testing/sysfs-class-typec | 24 +++++++++++++++ > drivers/usb/typec/class.c | 33 +++++++++++++++++++++ > 2 files changed, 57 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec > index 0f839fd022f1..0ac144bc5927 100644 > --- a/Documentation/ABI/testing/sysfs-class-typec > +++ b/Documentation/ABI/testing/sysfs-class-typec > @@ -205,6 +205,30 @@ Description: > will show 0 until Discover Identity command result becomes > available. The value can be polled. > > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo1 > +Date: October 2020 > +Contact: Prashant Malani <pmalani@chromium.org> > +Description: > + 1st Product Type VDO of Discover Identity command result. > + The value will show 0 until Discover Identity command result becomes > + available and a valid Product Type VDO is returned. > + > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo2 > +Date: October 2020 > +Contact: Prashant Malani <pmalani@chromium.org> > +Description: > + 2nd Product Type VDO of Discover Identity command result. > + The value will show 0 until Discover Identity command result becomes > + available and a valid Product Type VDO is returned. > + > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo3 > +Date: October 2020 > +Contact: Prashant Malani <pmalani@chromium.org> > +Description: > + 3rd Product Type VDO of Discover Identity command result. > + The value will show 0 until Discover Identity command result becomes > + available and a valid Product Type VDO is returned. > + > > USB Type-C port alternate mode devices. > > diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c > index 35eec707cb51..a2c88594b044 100644 > --- a/drivers/usb/typec/class.c > +++ b/drivers/usb/typec/class.c > @@ -122,10 +122,40 @@ static ssize_t product_show(struct device *dev, struct device_attribute *attr, > } > static DEVICE_ATTR_RO(product); > > +static ssize_t product_type_vdo1_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct usb_pd_identity *id = get_pd_identity(dev); > + > + return sysfs_emit(buf, "0x%08x\n", id->vdo[0]); > +} > +static DEVICE_ATTR_RO(product_type_vdo1); > + > +static ssize_t product_type_vdo2_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct usb_pd_identity *id = get_pd_identity(dev); > + > + return sysfs_emit(buf, "0x%08x\n", id->vdo[1]); > +} > +static DEVICE_ATTR_RO(product_type_vdo2); > + > +static ssize_t product_type_vdo3_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct usb_pd_identity *id = get_pd_identity(dev); > + > + return sysfs_emit(buf, "0x%08x\n", id->vdo[2]); > +} > +static DEVICE_ATTR_RO(product_type_vdo3); > + > static struct attribute *usb_pd_id_attrs[] = { > &dev_attr_id_header.attr, > &dev_attr_cert_stat.attr, > &dev_attr_product.attr, > + &dev_attr_product_type_vdo1.attr, > + &dev_attr_product_type_vdo2.attr, > + &dev_attr_product_type_vdo3.attr, > NULL > }; > > @@ -144,6 +174,9 @@ static void typec_report_identity(struct device *dev) > sysfs_notify(&dev->kobj, "identity", "id_header"); > sysfs_notify(&dev->kobj, "identity", "cert_stat"); > sysfs_notify(&dev->kobj, "identity", "product"); > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo1"); > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo2"); > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo3"); > } I've now come to the conclusion that this is not the correct approach. Instead, the whole identity, all six VDOs, should be supplied separately with a "raw" sysfs attribute file after all. The three attribute files that we already have - so id_header, cert_stat and product - can always supply the actual VDO as is, regardless of the product type, so they are fine. But these new attribute files, product_type_vdoX, would behave differently as they supply different information depending on the product type. That just does not feel right to me. So lets just add the "raw" sysfs attribute file. We can think about extracting some other details from the product type VDOs once the specification has settled down a bit and we can be quite certain that those details will always be available. Would this be OK to you? I think we should be able to dump the data to the "raw" sysfs attribute file with something like hex_dump_to_buffer(). thanks, -- heikki
On Tue, Nov 10, 2020 at 01:54:53PM +0200, Heikki Krogerus wrote: > On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > > A PD-capable device can return up to 3 Product Type VDOs as part of its > > DiscoverIdentity Response (USB PD Spec, Rev 3.0, Version 2.0, Section > > 6.4.4.3.1). Add sysfs attributes to expose these to userspace. > > > > Cc: Benson Leung <bleung@chromium.org> > > Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> > > Signed-off-by: Prashant Malani <pmalani@chromium.org> > > --- > > > > Changes in v3: > > - Split each product type VDO into a separate attribute. > > - Changed sprintf() to sysfs_emit(). > > - Changed ABI documentation based on consolidation of identity VDO > > descriptions in the previous patch (1/2). > > > > Changes in v2: > > - Added sysfs_notify() call for the attribute. > > - Added description for the attribute in > > Documentation/ABI/testing/sysfs-class-typec. > > > > Documentation/ABI/testing/sysfs-class-typec | 24 +++++++++++++++ > > drivers/usb/typec/class.c | 33 +++++++++++++++++++++ > > 2 files changed, 57 insertions(+) > > > > diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec > > index 0f839fd022f1..0ac144bc5927 100644 > > --- a/Documentation/ABI/testing/sysfs-class-typec > > +++ b/Documentation/ABI/testing/sysfs-class-typec > > @@ -205,6 +205,30 @@ Description: > > will show 0 until Discover Identity command result becomes > > available. The value can be polled. > > > > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo1 > > +Date: October 2020 > > +Contact: Prashant Malani <pmalani@chromium.org> > > +Description: > > + 1st Product Type VDO of Discover Identity command result. > > + The value will show 0 until Discover Identity command result becomes > > + available and a valid Product Type VDO is returned. > > + > > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo2 > > +Date: October 2020 > > +Contact: Prashant Malani <pmalani@chromium.org> > > +Description: > > + 2nd Product Type VDO of Discover Identity command result. > > + The value will show 0 until Discover Identity command result becomes > > + available and a valid Product Type VDO is returned. > > + > > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo3 > > +Date: October 2020 > > +Contact: Prashant Malani <pmalani@chromium.org> > > +Description: > > + 3rd Product Type VDO of Discover Identity command result. > > + The value will show 0 until Discover Identity command result becomes > > + available and a valid Product Type VDO is returned. > > + > > > > USB Type-C port alternate mode devices. > > > > diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c > > index 35eec707cb51..a2c88594b044 100644 > > --- a/drivers/usb/typec/class.c > > +++ b/drivers/usb/typec/class.c > > @@ -122,10 +122,40 @@ static ssize_t product_show(struct device *dev, struct device_attribute *attr, > > } > > static DEVICE_ATTR_RO(product); > > > > +static ssize_t product_type_vdo1_show(struct device *dev, struct device_attribute *attr, > > + char *buf) > > +{ > > + struct usb_pd_identity *id = get_pd_identity(dev); > > + > > + return sysfs_emit(buf, "0x%08x\n", id->vdo[0]); > > +} > > +static DEVICE_ATTR_RO(product_type_vdo1); > > + > > +static ssize_t product_type_vdo2_show(struct device *dev, struct device_attribute *attr, > > + char *buf) > > +{ > > + struct usb_pd_identity *id = get_pd_identity(dev); > > + > > + return sysfs_emit(buf, "0x%08x\n", id->vdo[1]); > > +} > > +static DEVICE_ATTR_RO(product_type_vdo2); > > + > > +static ssize_t product_type_vdo3_show(struct device *dev, struct device_attribute *attr, > > + char *buf) > > +{ > > + struct usb_pd_identity *id = get_pd_identity(dev); > > + > > + return sysfs_emit(buf, "0x%08x\n", id->vdo[2]); > > +} > > +static DEVICE_ATTR_RO(product_type_vdo3); > > + > > static struct attribute *usb_pd_id_attrs[] = { > > &dev_attr_id_header.attr, > > &dev_attr_cert_stat.attr, > > &dev_attr_product.attr, > > + &dev_attr_product_type_vdo1.attr, > > + &dev_attr_product_type_vdo2.attr, > > + &dev_attr_product_type_vdo3.attr, > > NULL > > }; > > > > @@ -144,6 +174,9 @@ static void typec_report_identity(struct device *dev) > > sysfs_notify(&dev->kobj, "identity", "id_header"); > > sysfs_notify(&dev->kobj, "identity", "cert_stat"); > > sysfs_notify(&dev->kobj, "identity", "product"); > > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo1"); > > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo2"); > > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo3"); > > } > > I've now come to the conclusion that this is not the correct approach. > Instead, the whole identity, all six VDOs, should be supplied > separately with a "raw" sysfs attribute file after all. > > The three attribute files that we already have - so id_header, > cert_stat and product - can always supply the actual VDO as is, > regardless of the product type, so they are fine. But these new > attribute files, product_type_vdoX, would behave differently as they > supply different information depending on the product type. That just > does not feel right to me. > > So lets just add the "raw" sysfs attribute file. We can think about > extracting some other details from the product type VDOs once the > specification has settled down a bit and we can be quite certain that > those details will always be available. > > Would this be OK to you? I think we should be able to dump the data to > the "raw" sysfs attribute file with something like hex_dump_to_buffer(). Does this mean that the value of the attributes depends on something external to the device? If so, how is userspace going to know how to parse this any differently than the kernel could today? And I say this as the maintainer of 'lsusb' which probably should start getting support for the typec attributes that are being exposed here :) thanks, greg k-h
Hi Greg, On Tue, Nov 10, 2020 at 01:22:06PM +0100, Greg KH wrote: > > I've now come to the conclusion that this is not the correct approach. > > Instead, the whole identity, all six VDOs, should be supplied > > separately with a "raw" sysfs attribute file after all. > > > > The three attribute files that we already have - so id_header, > > cert_stat and product - can always supply the actual VDO as is, > > regardless of the product type, so they are fine. But these new > > attribute files, product_type_vdoX, would behave differently as they > > supply different information depending on the product type. That just > > does not feel right to me. > > > > So lets just add the "raw" sysfs attribute file. We can think about > > extracting some other details from the product type VDOs once the > > specification has settled down a bit and we can be quite certain that > > those details will always be available. > > > > Would this be OK to you? I think we should be able to dump the data to > > the "raw" sysfs attribute file with something like hex_dump_to_buffer(). > > Does this mean that the value of the attributes depends on something > external to the device? If so, how is userspace going to know how to > parse this any differently than the kernel could today? > > And I say this as the maintainer of 'lsusb' which probably should start > getting support for the typec attributes that are being exposed here :) OK, this is great! I really want you opinion on this. Let me try to explain the situation. So USB Power Delivery specification defines a set of these product types, as I'm sure you already know. You have your hub, alternate mode adapter, and so on. Then there are also a couple of cable types. Originally I though that a product type simply equals a device type (and that still feels correct to me). Each product type can have its own "ABI" in form of the attribute files, that really should not be a problem, right? The problem with that was that we do not always know the product type. For example UCSI does not supply the operating system the response to the Discover Identity request from the partner device that contains this information. It would mean that depending on your system, we will claim that, let's say a hub really is a hub, or just some kind of a default partner device. There was discussion about this back in the day on this mailing list, and it was considered to be at least a little bit confusing for the user. In the end I did not propose the separate device types for each USB PD product type (yet). Instead we only expose the header part of the response to the Discover Identity (when we have it) because that part is the same for all product types. So basically we have just the "default" partner device type for everything for now. But since now we clearly need all the identity details, not just the header, it's good to talk about this again. Maybe even the "raw" attribute file is not that useful in the end, and we really should finally introduce the separate device types for each product types? Or maybe there is a third option that I have not even thought of? thanks, -- heikki
Hi Heikki, On Tue, Nov 10, 2020 at 01:54:53PM +0200, Heikki Krogerus wrote: > On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > > I've now come to the conclusion that this is not the correct approach. > Instead, the whole identity, all six VDOs, should be supplied > separately with a "raw" sysfs attribute file after all. > > The three attribute files that we already have - so id_header, > cert_stat and product - can always supply the actual VDO as is, > regardless of the product type, so they are fine. But these new > attribute files, product_type_vdoX, would behave differently as they > supply different information depending on the product type. That just > does not feel right to me. OOI: I'd like to understand the reservations around this approach. Can't userspace just read these and then interpret them appropriately according to the id_header as well as PD revision (and version number) if that's exposed? The only thing I see changing is how we name those product_type_vdoX sysfs files, i.e product_type_vdo0 == passive_cable_vdo OR active_cable_vdo1 depending on the product type. That said, perhaps I'm missing some aspect of this. > > So lets just add the "raw" sysfs attribute file. We can think about > extracting some other details from the product type VDOs once the > specification has settled down a bit and we can be quite certain that > those details will always be available. > > Would this be OK to you? I think we should be able to dump the data to > the "raw" sysfs attribute file with something like hex_dump_to_buffer(). FWIW, "raw" option SGTM (the product type VDOs can be parsed from the buffer since the format is fixed). > > thanks, > > -- > heikki
On Wed, Nov 11, 2020 at 06:40:55PM -0800, Prashant Malani wrote: > Hi Heikki, > > On Tue, Nov 10, 2020 at 01:54:53PM +0200, Heikki Krogerus wrote: > > On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > > > > I've now come to the conclusion that this is not the correct approach. > > Instead, the whole identity, all six VDOs, should be supplied > > separately with a "raw" sysfs attribute file after all. > > > > The three attribute files that we already have - so id_header, > > cert_stat and product - can always supply the actual VDO as is, > > regardless of the product type, so they are fine. But these new > > attribute files, product_type_vdoX, would behave differently as they > > supply different information depending on the product type. That just > > does not feel right to me. > > OOI: I'd like to understand the reservations around this approach. Can't > userspace just read these and then interpret them appropriately according > to the id_header as well as PD revision (and version number) if that's exposed? > The only thing I see changing is how we name those product_type_vdoX > sysfs files, i.e product_type_vdo0 == passive_cable_vdo OR active_cable_vdo1 > depending on the product type. > > That said, perhaps I'm missing some aspect of this. I don't think the userspace should have to interpret any of these VDOs. If the userspace has to interpret the information, then the userspace should interpret everything for the sake of consistency (so the "raw" attribute file). But I still think that defining separate device types for every product type would be the best way to handle the identity. We could then have sysfs attribute files that are specific for each product type. It does not even matter that some of the product types are going to be removed. We will have to handle all of them in any case, including the ones that were removed. This way things would be much more clear for the userspace. The only problem IMO with the separate device types for each product type is that we don't always have access to the Discover Identity result. It means depending on your system we will claim the partner device type is "default" (no identity information) or the actual product type. That is also a bit inconsistent, but is is acceptable? I would really like to here what Greg thinks about all this. > > So lets just add the "raw" sysfs attribute file. We can think about > > extracting some other details from the product type VDOs once the > > specification has settled down a bit and we can be quite certain that > > those details will always be available. > > > > Would this be OK to you? I think we should be able to dump the data to > > the "raw" sysfs attribute file with something like hex_dump_to_buffer(). > > FWIW, "raw" option SGTM (the product type VDOs can be parsed from the > buffer since the format is fixed). Well, I'm starting to think that what if we just prepare patches where we propose separate device type for every product type? Of course, if they are OK to you? thanks, -- heikki
Hi Heikki, On Thu, Nov 12, 2020 at 4:43 AM Heikki Krogerus <heikki.krogerus@linux.intel.com> wrote: > > On Wed, Nov 11, 2020 at 06:40:55PM -0800, Prashant Malani wrote: > > Hi Heikki, > > > > On Tue, Nov 10, 2020 at 01:54:53PM +0200, Heikki Krogerus wrote: > > > On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > > > > > > I've now come to the conclusion that this is not the correct approach. > > > Instead, the whole identity, all six VDOs, should be supplied > > > separately with a "raw" sysfs attribute file after all. > > > > > > The three attribute files that we already have - so id_header, > > > cert_stat and product - can always supply the actual VDO as is, > > > regardless of the product type, so they are fine. But these new > > > attribute files, product_type_vdoX, would behave differently as they > > > supply different information depending on the product type. That just > > > does not feel right to me. > > > > OOI: I'd like to understand the reservations around this approach. Can't > > userspace just read these and then interpret them appropriately according > > to the id_header as well as PD revision (and version number) if that's exposed? > > The only thing I see changing is how we name those product_type_vdoX > > sysfs files, i.e product_type_vdo0 == passive_cable_vdo OR active_cable_vdo1 > > depending on the product type. > > > > That said, perhaps I'm missing some aspect of this. > > I don't think the userspace should have to interpret any of these > VDOs. If the userspace has to interpret the information, then the > userspace should interpret everything for the sake of consistency (so > the "raw" attribute file). > > But I still think that defining separate device types for every > product type would be the best way to handle the identity. We could > then have sysfs attribute files that are specific for each product > type. It does not even matter that some of the product types are going > to be removed. We will have to handle all of them in any case, > including the ones that were removed. This way things would be much > more clear for the userspace. > > The only problem IMO with the separate device types for each product > type is that we don't always have access to the Discover Identity > result. It means depending on your system we will claim the > partner device type is "default" (no identity information) or the > actual product type. That is also a bit inconsistent, but is is > acceptable? I would really like to here what Greg thinks about all > this. Thanks for explaining the rationale. Of course, I defer to Greg & your decision on this :) I'm yet unable to grasp what benefit userspace gets from having the kernel parse and present this data in appropriately named sysfs files when the userspace has enough info to do so itself. For that reason and also because the "raw" approach is IMO a bit more resilient to the changes we talk about (some product type VDOs being dropped off across PD spec uprevs [1] etc) the "raw" proposal sounded appealing to me. > > > > So lets just add the "raw" sysfs attribute file. We can think about > > > extracting some other details from the product type VDOs once the > > > specification has settled down a bit and we can be quite certain that > > > those details will always be available. > > > > > > Would this be OK to you? I think we should be able to dump the data to > > > the "raw" sysfs attribute file with something like hex_dump_to_buffer(). > > > > FWIW, "raw" option SGTM (the product type VDOs can be parsed from the > > buffer since the format is fixed). > > Well, I'm starting to think that what if we just prepare patches where > we propose separate device type for every product type? Of course, if > they are OK to you? > SG. To clarify, will you prepare these patches? Thanks & best regards, -Prashant [1]: https://lore.kernel.org/linux-usb/CANLzEkskrWXWLC+csObYwB+JUFdH+p6V6giMHtsKY-L61cTG9g@mail.gmail.com/
On Thu, Nov 12, 2020 at 08:50:55AM -0800, Prashant Malani wrote: > Hi Heikki, > > On Thu, Nov 12, 2020 at 4:43 AM Heikki Krogerus > <heikki.krogerus@linux.intel.com> wrote: > > > > On Wed, Nov 11, 2020 at 06:40:55PM -0800, Prashant Malani wrote: > > > Hi Heikki, > > > > > > On Tue, Nov 10, 2020 at 01:54:53PM +0200, Heikki Krogerus wrote: > > > > On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > > > > > > > > I've now come to the conclusion that this is not the correct approach. > > > > Instead, the whole identity, all six VDOs, should be supplied > > > > separately with a "raw" sysfs attribute file after all. > > > > > > > > The three attribute files that we already have - so id_header, > > > > cert_stat and product - can always supply the actual VDO as is, > > > > regardless of the product type, so they are fine. But these new > > > > attribute files, product_type_vdoX, would behave differently as they > > > > supply different information depending on the product type. That just > > > > does not feel right to me. > > > > > > OOI: I'd like to understand the reservations around this approach. Can't > > > userspace just read these and then interpret them appropriately according > > > to the id_header as well as PD revision (and version number) if that's exposed? > > > The only thing I see changing is how we name those product_type_vdoX > > > sysfs files, i.e product_type_vdo0 == passive_cable_vdo OR active_cable_vdo1 > > > depending on the product type. > > > > > > That said, perhaps I'm missing some aspect of this. > > > > I don't think the userspace should have to interpret any of these > > VDOs. If the userspace has to interpret the information, then the > > userspace should interpret everything for the sake of consistency (so > > the "raw" attribute file). > > > > But I still think that defining separate device types for every > > product type would be the best way to handle the identity. We could > > then have sysfs attribute files that are specific for each product > > type. It does not even matter that some of the product types are going > > to be removed. We will have to handle all of them in any case, > > including the ones that were removed. This way things would be much > > more clear for the userspace. > > > > The only problem IMO with the separate device types for each product > > type is that we don't always have access to the Discover Identity > > result. It means depending on your system we will claim the > > partner device type is "default" (no identity information) or the > > actual product type. That is also a bit inconsistent, but is is > > acceptable? I would really like to here what Greg thinks about all > > this. > > Thanks for explaining the rationale. > Of course, I defer to Greg & your decision on this :) > > I'm yet unable to grasp what benefit userspace gets from having the kernel parse > and present this data in appropriately named sysfs files when the userspace has > enough info to do so itself. > > For that reason and also because the "raw" approach is IMO a bit more > resilient to the changes > we talk about (some product type VDOs being dropped off across PD spec > uprevs [1] etc) > the "raw" proposal sounded appealing to me. I'm not saying no to the "raw" proposal. I would prefer that we parse the data for the userspace in this case, but if you guys think that it is better to just let the userspace take care of that, then I'm fine with that too. > > > > So lets just add the "raw" sysfs attribute file. We can think about > > > > extracting some other details from the product type VDOs once the > > > > specification has settled down a bit and we can be quite certain that > > > > those details will always be available. > > > > > > > > Would this be OK to you? I think we should be able to dump the data to > > > > the "raw" sysfs attribute file with something like hex_dump_to_buffer(). > > > > > > FWIW, "raw" option SGTM (the product type VDOs can be parsed from the > > > buffer since the format is fixed). > > > > Well, I'm starting to think that what if we just prepare patches where > > we propose separate device type for every product type? Of course, if > > they are OK to you? > > > SG. To clarify, will you prepare these patches? I'll take a look at this. I can prepare something. Let's start with the raw dump approach. thanks, -- heikki
On Fri, Oct 23, 2020 at 02:43:28PM -0700, Prashant Malani wrote: > A PD-capable device can return up to 3 Product Type VDOs as part of its > DiscoverIdentity Response (USB PD Spec, Rev 3.0, Version 2.0, Section > 6.4.4.3.1). Add sysfs attributes to expose these to userspace. > > Cc: Benson Leung <bleung@chromium.org> > Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> > Signed-off-by: Prashant Malani <pmalani@chromium.org> I'm now fine with this as it is, no more objections. I'll send the "type2 attribute patch separately. I think you need to rebase this too, but FWIW: Reviewed-by Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > > Changes in v3: > - Split each product type VDO into a separate attribute. > - Changed sprintf() to sysfs_emit(). > - Changed ABI documentation based on consolidation of identity VDO > descriptions in the previous patch (1/2). > > Changes in v2: > - Added sysfs_notify() call for the attribute. > - Added description for the attribute in > Documentation/ABI/testing/sysfs-class-typec. > > Documentation/ABI/testing/sysfs-class-typec | 24 +++++++++++++++ > drivers/usb/typec/class.c | 33 +++++++++++++++++++++ > 2 files changed, 57 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec > index 0f839fd022f1..0ac144bc5927 100644 > --- a/Documentation/ABI/testing/sysfs-class-typec > +++ b/Documentation/ABI/testing/sysfs-class-typec > @@ -205,6 +205,30 @@ Description: > will show 0 until Discover Identity command result becomes > available. The value can be polled. > > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo1 > +Date: October 2020 > +Contact: Prashant Malani <pmalani@chromium.org> > +Description: > + 1st Product Type VDO of Discover Identity command result. > + The value will show 0 until Discover Identity command result becomes > + available and a valid Product Type VDO is returned. > + > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo2 > +Date: October 2020 > +Contact: Prashant Malani <pmalani@chromium.org> > +Description: > + 2nd Product Type VDO of Discover Identity command result. > + The value will show 0 until Discover Identity command result becomes > + available and a valid Product Type VDO is returned. > + > +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo3 > +Date: October 2020 > +Contact: Prashant Malani <pmalani@chromium.org> > +Description: > + 3rd Product Type VDO of Discover Identity command result. > + The value will show 0 until Discover Identity command result becomes > + available and a valid Product Type VDO is returned. > + > > USB Type-C port alternate mode devices. > > diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c > index 35eec707cb51..a2c88594b044 100644 > --- a/drivers/usb/typec/class.c > +++ b/drivers/usb/typec/class.c > @@ -122,10 +122,40 @@ static ssize_t product_show(struct device *dev, struct device_attribute *attr, > } > static DEVICE_ATTR_RO(product); > > +static ssize_t product_type_vdo1_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct usb_pd_identity *id = get_pd_identity(dev); > + > + return sysfs_emit(buf, "0x%08x\n", id->vdo[0]); > +} > +static DEVICE_ATTR_RO(product_type_vdo1); > + > +static ssize_t product_type_vdo2_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct usb_pd_identity *id = get_pd_identity(dev); > + > + return sysfs_emit(buf, "0x%08x\n", id->vdo[1]); > +} > +static DEVICE_ATTR_RO(product_type_vdo2); > + > +static ssize_t product_type_vdo3_show(struct device *dev, struct device_attribute *attr, > + char *buf) > +{ > + struct usb_pd_identity *id = get_pd_identity(dev); > + > + return sysfs_emit(buf, "0x%08x\n", id->vdo[2]); > +} > +static DEVICE_ATTR_RO(product_type_vdo3); > + > static struct attribute *usb_pd_id_attrs[] = { > &dev_attr_id_header.attr, > &dev_attr_cert_stat.attr, > &dev_attr_product.attr, > + &dev_attr_product_type_vdo1.attr, > + &dev_attr_product_type_vdo2.attr, > + &dev_attr_product_type_vdo3.attr, > NULL > }; > > @@ -144,6 +174,9 @@ static void typec_report_identity(struct device *dev) > sysfs_notify(&dev->kobj, "identity", "id_header"); > sysfs_notify(&dev->kobj, "identity", "cert_stat"); > sysfs_notify(&dev->kobj, "identity", "product"); > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo1"); > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo2"); > + sysfs_notify(&dev->kobj, "identity", "product_type_vdo3"); > } > > /* ------------------------------------------------------------------------- */ > -- > 2.29.0.rc1.297.gfa9743e501-goog thanks, -- heikki
diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec index 0f839fd022f1..0ac144bc5927 100644 --- a/Documentation/ABI/testing/sysfs-class-typec +++ b/Documentation/ABI/testing/sysfs-class-typec @@ -205,6 +205,30 @@ Description: will show 0 until Discover Identity command result becomes available. The value can be polled. +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo1 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 1st Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo2 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 2nd Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo3 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 3rd Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + USB Type-C port alternate mode devices. diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 35eec707cb51..a2c88594b044 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -122,10 +122,40 @@ static ssize_t product_show(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR_RO(product); +static ssize_t product_type_vdo1_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sysfs_emit(buf, "0x%08x\n", id->vdo[0]); +} +static DEVICE_ATTR_RO(product_type_vdo1); + +static ssize_t product_type_vdo2_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sysfs_emit(buf, "0x%08x\n", id->vdo[1]); +} +static DEVICE_ATTR_RO(product_type_vdo2); + +static ssize_t product_type_vdo3_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct usb_pd_identity *id = get_pd_identity(dev); + + return sysfs_emit(buf, "0x%08x\n", id->vdo[2]); +} +static DEVICE_ATTR_RO(product_type_vdo3); + static struct attribute *usb_pd_id_attrs[] = { &dev_attr_id_header.attr, &dev_attr_cert_stat.attr, &dev_attr_product.attr, + &dev_attr_product_type_vdo1.attr, + &dev_attr_product_type_vdo2.attr, + &dev_attr_product_type_vdo3.attr, NULL }; @@ -144,6 +174,9 @@ static void typec_report_identity(struct device *dev) sysfs_notify(&dev->kobj, "identity", "id_header"); sysfs_notify(&dev->kobj, "identity", "cert_stat"); sysfs_notify(&dev->kobj, "identity", "product"); + sysfs_notify(&dev->kobj, "identity", "product_type_vdo1"); + sysfs_notify(&dev->kobj, "identity", "product_type_vdo2"); + sysfs_notify(&dev->kobj, "identity", "product_type_vdo3"); } /* ------------------------------------------------------------------------- */
A PD-capable device can return up to 3 Product Type VDOs as part of its DiscoverIdentity Response (USB PD Spec, Rev 3.0, Version 2.0, Section 6.4.4.3.1). Add sysfs attributes to expose these to userspace. Cc: Benson Leung <bleung@chromium.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Prashant Malani <pmalani@chromium.org> --- Changes in v3: - Split each product type VDO into a separate attribute. - Changed sprintf() to sysfs_emit(). - Changed ABI documentation based on consolidation of identity VDO descriptions in the previous patch (1/2). Changes in v2: - Added sysfs_notify() call for the attribute. - Added description for the attribute in Documentation/ABI/testing/sysfs-class-typec. Documentation/ABI/testing/sysfs-class-typec | 24 +++++++++++++++ drivers/usb/typec/class.c | 33 +++++++++++++++++++++ 2 files changed, 57 insertions(+)