diff mbox series

[v1,6/8] usb: chipidea: tegra: Support runtime PM

Message ID 20201215202113.30394-7-digetx@gmail.com
State Superseded
Headers show
Series Support Runtime PM and host mode by Tegra ChipIdea USB driver | expand

Commit Message

Dmitry Osipenko Dec. 15, 2020, 8:21 p.m. UTC
Tegra PHY driver now supports waking up controller from a low power mode.
Enable runtime PM in order to put controller into the LPM during idle.

Tested-by: Matt Merhar <mattmerhar@protonmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/usb/chipidea/ci_hdrc_tegra.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
index fff130f08996..4531c2b069fe 100644
--- a/drivers/usb/chipidea/ci_hdrc_tegra.c
+++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
@@ -38,21 +38,24 @@  struct tegra_usb_soc_info {
 
 static const struct tegra_usb_soc_info tegra20_ehci_soc_info = {
 	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
-		 CI_HDRC_OVERRIDE_PHY_CONTROL,
+		 CI_HDRC_OVERRIDE_PHY_CONTROL |
+		 CI_HDRC_SUPPORTS_RUNTIME_PM,
 	.dr_mode = USB_DR_MODE_HOST,
 	.txfifothresh = 10,
 };
 
 static const struct tegra_usb_soc_info tegra30_ehci_soc_info = {
 	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
-		 CI_HDRC_OVERRIDE_PHY_CONTROL
+		 CI_HDRC_OVERRIDE_PHY_CONTROL |
+		 CI_HDRC_SUPPORTS_RUNTIME_PM,
 	.dr_mode = USB_DR_MODE_HOST,
 	.txfifothresh = 16,
 };
 
 static const struct tegra_usb_soc_info tegra_udc_soc_info = {
 	.flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
-		 CI_HDRC_OVERRIDE_PHY_CONTROL,
+		 CI_HDRC_OVERRIDE_PHY_CONTROL |
+		 CI_HDRC_SUPPORTS_RUNTIME_PM,
 	.dr_mode = USB_DR_MODE_UNKNOWN,
 };
 
@@ -323,6 +326,10 @@  static int tegra_usb_probe(struct platform_device *pdev)
 	usb->data.hub_control = tegra_ehci_hub_control;
 	usb->data.notify_event = tegra_usb_notify_event;
 
+	/* Tegra PHY driver currently doesn't support LPM for ULPI */
+	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI)
+		usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM;
+
 	usb->dev = ci_hdrc_add_device(&pdev->dev, pdev->resource,
 				      pdev->num_resources, &usb->data);
 	if (IS_ERR(usb->dev)) {