| Message ID | 20211210095722.22269-1-dnlplm@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/1] net: usb: qmi_wwan: add Telit 0x1070 composition | expand |
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 86b814e99224..f510e8219470 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1358,6 +1358,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)}, /* Telit FN990 */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
Add the following Telit FN990 composition: 0x1070: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> --- Hello Bjørn, following the output of usb-devices: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=10000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1bc7 ProdID=1070 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990A28 S: SerialNumber=522db9de C: #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option Thanks, Daniele --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)