diff mbox

usb: phy: qcom: Switch to new extcon framework API

Message ID 1441625076-20306-1-git-send-email-ivan.ivanov@linaro.org
State Accepted
Commit 7ed855e65b4f9ecd8658ddda5d50d0e7399419f3
Headers show

Commit Message

Ivan T. Ivanov Sept. 7, 2015, 11:24 a.m. UTC 
[un]register_interest and reading cable state by
name have been deprecated. Switch to new API.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
---
 drivers/usb/phy/phy-qcom-8x16-usb.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index 5d357a94599e..579587d97217 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c
@@ -71,7 +71,7 @@  struct phy_8x16 {

 	struct reset_control		*phy_reset;

-	struct extcon_specific_cable_nb vbus_cable;
+	struct extcon_dev		*vbus_edev;
 	struct notifier_block		vbus_notify;

 	struct gpio_desc		*switch_gpio;
@@ -234,7 +234,7 @@  static int phy_8x16_init(struct usb_phy *phy)
 	val = ULPI_PWR_OTG_COMP_DISABLE;
 	usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));

-	state = extcon_get_cable_state(qphy->vbus_cable.edev, "USB");
+	state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB);
 	if (state)
 		phy_8x16_vbus_on(qphy);
 	else
@@ -314,7 +314,6 @@  static int phy_8x16_reboot_notify(struct notifier_block *this,

 static int phy_8x16_probe(struct platform_device *pdev)
 {
-	struct extcon_dev *edev;
 	struct phy_8x16 *qphy;
 	struct resource *res;
 	struct usb_phy *phy;
@@ -349,9 +348,9 @@  static int phy_8x16_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;

-	edev = extcon_get_edev_by_phandle(phy->dev, 0);
-	if (IS_ERR(edev))
-		return PTR_ERR(edev);
+	qphy->vbus_edev = extcon_get_edev_by_phandle(phy->dev, 0);
+	if (IS_ERR(qphy->vbus_edev))
+		return PTR_ERR(qphy->vbus_edev);

 	ret = clk_set_rate(qphy->core_clk, INT_MAX);
 	if (ret < 0)
@@ -370,8 +369,8 @@  static int phy_8x16_probe(struct platform_device *pdev)
 		goto off_clks;

 	qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
-	ret = extcon_register_interest(&qphy->vbus_cable, edev->name,
-				       "USB", &qphy->vbus_notify);
+	ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB,
+				       &qphy->vbus_notify);
 	if (ret < 0)
 		goto off_power;

@@ -385,7 +384,8 @@  static int phy_8x16_probe(struct platform_device *pdev)
 	return 0;

 off_extcon:
-	extcon_unregister_interest(&qphy->vbus_cable);
+	extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
+				   &qphy->vbus_notify);
 off_power:
 	phy_8x16_regulators_disable(qphy);
 off_clks:
@@ -400,7 +400,8 @@  static int phy_8x16_remove(struct platform_device *pdev)
 	struct phy_8x16 *qphy = platform_get_drvdata(pdev);

 	unregister_reboot_notifier(&qphy->reboot_notify);
-	extcon_unregister_interest(&qphy->vbus_cable);
+	extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
+				   &qphy->vbus_notify);

 	/*
 	 * Ensure that D+/D- lines are routed to uB connector, so