@@ -13,6 +13,12 @@
#include <linux/platform_device.h>
#include "core.h"
+#include <linux/usb/xhci-plat.h>
+#include <linux/usb/xhci-quirks.h>
+
+static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
+ .quirks = XHCI_SKIP_PHY_INIT,
+};
static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
int irq, char *name)
@@ -122,6 +128,13 @@ int dwc3_host_init(struct dwc3 *dwc)
}
}
+ ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
+ sizeof(xhci_plat_dwc3_xhci));
+ if (ret) {
+ dev_err(dwc->dev, "failed to add data to xHCI\n");
+ goto err;
+ }
+
ret = platform_device_add(xhci);
if (ret) {
dev_err(dwc->dev, "failed to register xHCI device\n");
Currently the phy init is done from dwc3 and also xhci which makes the runtime_usage value 2 for the phy which causes issue during runtime suspend. When we run the below command the runtime_status still shows active. echo auto > /sys/bus/platform/devices/88e3000.phy/power/control dwc3 manages PHY by own DRD driver, so skip the management by HCD core by setting this quirk. Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> --- drivers/usb/dwc3/host.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)