@@ -27,6 +27,15 @@ config TYPEC_RT1711H
Type-C Port Controller Manager to provide USB PD and USB
Type-C functionalities.
+config TYPEC_RT1718S
+ tristate "Richtek RT1718S Type-C chip driver"
+ depends on I2C
+ help
+ Richtek RT1718S Type-C chip driver that works with
+ Type-C Port Controller Manager to provide USB PD and USB
+ Type-C functionalities.
+ Additionally, it supports BC1.2 and power-path control.
+
config TYPEC_MT6360
tristate "Mediatek MT6360 Type-C driver"
depends on MFD_MT6360
@@ -5,6 +5,7 @@ obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o
typec_wcove-y := wcove.o
obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o
obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o
+obj-$(CONFIG_TYPEC_RT1718S) += tcpci_rt1718s.o
obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o
obj-$(CONFIG_TYPEC_TCPCI_MT6370) += tcpci_mt6370.o
obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o
new file mode 100644
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 richtek Inc.
+ *
+ * Author: ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/tcpci.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/pd_vdo.h>
+
+#define RT1718S_VID 0x29CF
+#define RT1718S_PID 0x1718
+
+#define RT1718S_P1PREFIX 0x00
+#define RT1718S_P1START (RT1718S_P1PREFIX << 8)
+#define RT1718S_P1END ((RT1718S_P1PREFIX << 8) + 0xFF)
+#define RT1718S_P2PREFIX 0xF2
+#define RT1718S_P2START (RT1718S_P2PREFIX << 8)
+#define RT1718S_P2END ((RT1718S_P2PREFIX << 8) + 0xFF)
+
+#define RT1718S_SYS_CTRL3 0xB0
+#define RT1718S_SWRESET_MASK BIT(0)
+
+struct rt1718s_chip {
+ struct tcpci_data tdata;
+ struct tcpci *tcpci;
+ struct device *dev;
+ struct regulator *vbus;
+ bool src_en;
+};
+
+static bool rt1718s_is_readwrite_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RT1718S_P1START ... RT1718S_P1END:
+ fallthrough;
+ case RT1718S_P2START ... RT1718S_P2END:
+ return true;
+ }
+
+ return false;
+}
+
+static const struct regmap_config rt1718s_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+
+ /* page 1(TCPC) : 0x00 ~ 0xff, page 2 : 0xf200 ~0xf2ff */
+ .max_register = RT1718S_P2END,
+ .writeable_reg = rt1718s_is_readwrite_reg,
+ .readable_reg = rt1718s_is_readwrite_reg,
+};
+
+static int rt1718s_regmap_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct i2c_msg xfer[2];
+ int ret;
+
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = reg_size;
+ xfer[0].buf = (u8 *)reg;
+
+ if (*(u8 *)reg == RT1718S_P1PREFIX) {
+ xfer[0].len = 1,
+ xfer[0].buf = (u8 *)(reg + 1);
+ }
+
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = val_size;
+ xfer[1].buf = (u8 *)val;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ //pr_info("wtf i2c_read [0x%04x]:0x%02x\n", *(u16 *)(reg), *(u8 *)val);
+ if (ret < 0)
+ return ret;
+ else if (ret != 2)
+ return -EIO;
+
+ return 0;
+}
+
+static int rt1718s_regmap_write(void *context, const void *val, size_t val_size)
+{
+ struct device *dev = context;
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct i2c_msg xfer;
+ int ret;
+
+ xfer.addr = i2c->addr;
+ xfer.flags = 0;
+ xfer.len = val_size;
+ xfer.buf = (u8 *)val;
+
+ if (*(u8 *)val == RT1718S_P1PREFIX) {
+ xfer.len = val_size - 1;
+ xfer.buf = (u8 *)(val + 1);
+ }
+
+ ret = i2c_transfer(i2c->adapter, &xfer, 1);
+ //pr_info("wtf i2c_write [0x%04x]:0x%02x\n", *(u16 *)(val), *(u8 *)(val+2));
+ if (ret < 0)
+ return ret;
+ if (ret != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static const struct regmap_bus rt1718s_regmap_bus = {
+ .read = rt1718s_regmap_read,
+ .write = rt1718s_regmap_write,
+};
+
+static const struct reg_sequence rt1718s_init_settings[] = {
+ /* config I2C timeout reset enable , and timeout to 200ms */
+ { 0xBF, 0x8F, 0 },
+ /* config CC Detect Debounce : 250us (25*val us) */
+ { 0xB1, 0x0A, 0 },
+ /* DRP Toggle Cycle : 76.8ms (51.2 + 6.4*val ms) */
+ { 0xB2, 0x04, 0 },
+ /* DRP Duyt Ctrl : dcSRC: 331/1024 ((val+1)/1024) */
+ { 0xB3, 0x4A, 0 },
+ { 0xB4, 0x01, 0 },
+ /* Enable VCONN Current Limit function */
+ { 0x8C, 0x41, 0 },
+ /* Enable cc open 40ms when pmic send vsysuv signal */
+ { 0xCA, 0xB3, 0 },
+ /* Set GPIO2 push-pull, output-low */
+ { 0xEE, 0x0C, 0},
+ /* bg en, low power en, vbus valid detect off, vbus present on, osc off */
+ { 0xB8, 0x1A, 0},
+ /* Link GPIO2 source default vbus to TCPC command */
+ { 0xEB, 0x08, 0},
+ /* Set GPIO2 vbus path */
+ { 0xEC, 0x8E, 0 },
+ /* auto low power timer 2.5s, auto low power en, auto low power mode */
+ { 0xF210, 0x35, 0 },
+ /* Set shipping mode off, AUTOIDLE on with timeout 96ms */
+ { 0x8F, 0x7F, 0 },
+};
+
+static int rt1718s_init(struct tcpci *tcpci, struct tcpci_data *tdata)
+{
+ int ret;
+
+ ret = regmap_register_patch(tdata->regmap, rt1718s_init_settings,
+ ARRAY_SIZE(rt1718s_init_settings));
+ pr_info("%s: [TCPC-] ret=%d\n", __func__, ret);
+ return ret;
+}
+
+static int rt1718s_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+ bool src, bool snk)
+{
+ struct rt1718s_chip *chip = container_of(tdata, struct rt1718s_chip, tdata);
+ int ret;
+
+ if (chip->src_en == src)
+ return 0;
+
+ if (src)
+ ret = regulator_enable(chip->vbus);
+ else
+ ret = regulator_disable(chip->vbus);
+
+ if (!ret)
+ chip->src_en = src;
+ return ret;
+}
+
+static irqreturn_t rt1718s_irq(int irq, void *dev_id)
+{
+ struct rt1718s_chip *chip = dev_id;
+
+ return tcpci_irq(chip->tcpci);
+}
+
+static int rt1718s_sw_reset(struct rt1718s_chip *chip)
+{
+ int ret;
+
+ ret = regmap_update_bits(chip->tdata.regmap, RT1718S_SYS_CTRL3,
+ RT1718S_SWRESET_MASK, RT1718S_SWRESET_MASK);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for IC to reset done*/
+ usleep_range(1000, 2000);
+
+ return 0;
+}
+
+static int rt1718s_check_chip_exist(struct i2c_client *i2c)
+{
+ int ret;
+
+ ret = i2c_smbus_read_word_data(i2c, TCPC_VENDOR_ID);
+ if (ret < 0)
+ return ret;
+ if (ret != RT1718S_VID) {
+ dev_err(&i2c->dev, "vid is not correct, 0x%04x\n", ret);
+ return -ENODEV;
+ }
+ ret = i2c_smbus_read_word_data(i2c, TCPC_PRODUCT_ID);
+ if (ret < 0)
+ return ret;
+ if (ret != RT1718S_PID) {
+ dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int rt1718s_probe(struct i2c_client *i2c)
+{
+ struct rt1718s_chip *chip;
+ struct gpio_desc *gpiod;
+ int ret;
+ u16 clr_events = 0;
+
+ ret = rt1718s_check_chip_exist(i2c);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "check vid/pid fail(%d)\n", ret);
+ return ret;
+ }
+
+ chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->dev = &i2c->dev;
+
+ chip->tdata.regmap = devm_regmap_init(&i2c->dev,
+ &rt1718s_regmap_bus, &i2c->dev,
+ &rt1718s_regmap_config);
+ if (IS_ERR(chip->tdata.regmap))
+ return dev_err_probe(&i2c->dev, PTR_ERR(chip->tdata.regmap),
+ "Failed to init regmap\n");
+
+ chip->vbus = devm_regulator_get(&i2c->dev, "vbus");
+ if (IS_ERR(chip->vbus))
+ return dev_err_probe(&i2c->dev, PTR_ERR(chip->vbus),
+ "Failed to get vbus regulator\n");
+
+ ret = rt1718s_sw_reset(chip);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_raw_write(chip->tdata.regmap, TCPC_ALERT_MASK, &clr_events,
+ sizeof(clr_events));
+
+ chip->tdata.init = rt1718s_init;
+ chip->tdata.set_vbus = rt1718s_set_vbus;
+ chip->tcpci = tcpci_register_port(&i2c->dev, &chip->tdata);
+ if (IS_ERR(chip->tcpci))
+ return dev_err_probe(&i2c->dev, PTR_ERR(chip->tcpci),
+ "Failed to register tcpci port\n");
+
+ /* for platform set gpio default inpull_high */
+ gpiod = devm_gpiod_get(&i2c->dev, NULL, GPIOD_IN);
+ if (IS_ERR(gpiod))
+ return dev_err_probe(&i2c->dev, PTR_ERR(gpiod),
+ "Failed to get gpio\n");
+
+ ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+ rt1718s_irq, IRQF_ONESHOT,
+ dev_name(&i2c->dev), chip);
+ if (ret) {
+ dev_err(chip->dev, "Failed to register irq\n");
+ tcpci_unregister_port(chip->tcpci);
+ return ret;
+ }
+
+ device_init_wakeup(&i2c->dev, true);
+ i2c_set_clientdata(i2c, chip);
+
+ dev_info(&i2c->dev, "%s:successfully\n", __func__);
+ return 0;
+}
+
+static void rt1718s_remove(struct i2c_client *i2c)
+{
+ struct rt1718s_chip *chip = i2c_get_clientdata(i2c);
+
+ tcpci_unregister_port(chip->tcpci);
+}
+
+static int __maybe_unused rt1718s_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(i2c->irq);
+ disable_irq(i2c->irq);
+
+ return 0;
+}
+
+static int __maybe_unused rt1718s_resume(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(i2c->irq);
+ enable_irq(i2c->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rt1718s_pm_ops, rt1718s_suspend, rt1718s_resume);
+
+static const struct of_device_id __maybe_unused rt1718s_of_id[] = {
+ { .compatible = "richtek,rt1718s", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt1718s_of_id);
+
+static struct i2c_driver rt1718s_i2c_driver = {
+ .driver = {
+ .name = "rt1718s",
+ .pm = &rt1718s_pm_ops,
+ .of_match_table = rt1718s_of_id,
+ },
+ .probe_new = rt1718s_probe,
+ .remove = rt1718s_remove,
+};
+module_i2c_driver(rt1718s_i2c_driver);
+
+MODULE_AUTHOR("Gene Chen <gene_chen@richtek.com>");
+MODULE_DESCRIPTION("RT1718S USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL");