@@ -126,47 +126,36 @@
#define USBDRD_UCTL_PORT_CFG_SS(port) (0x48 + (0x20 * port))
#define USBDRD_UCTL_PORT_CR_DBG_CFG(port) (0x50 + (0x20 * port))
#define USBDRD_UCTL_PORT_CR_DBG_STATUS(port) (0x58 + (0x20 * port))
+
+/*
+ * UCTL Configuration Register
+ */
#define USBDRD_UCTL_HOST_CFG 0xe0
+/* Indicates minimum value of all received BELT values */
+# define USBDRD_UCTL_HOST_CFG_HOST_CURRENT_BELT GENMASK(59, 48)
+/* HS jitter adjustment */
+# define USBDRD_UCTL_HOST_CFG_FLA GENMASK(37, 32)
+/* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */
+# define USBDRD_UCTL_HOST_CFG_BME BIT(28)
+/* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */
+# define USBDRD_UCTL_HOST_OCI_EN BIT(27)
+/* Overcurrent sene selection:
+ * 0x0 = Overcurrent indication from off-chip is active-low
+ * 0x1 = Overcurrent indication from off-chip is active-high
+ */
+# define USBDRD_UCTL_HOST_OCI_ACTIVE_HIGH_EN BIT(26)
+/* Port power control enable: 0x0 = unavailable, 0x1 = available */
+# define USBDRD_UCTL_HOST_PPC_EN BIT(25)
+/* Port power control sense selection:
+ * 0x0 = Port power to off-chip is active-low
+ * 0x1 = Port power to off-chip is active-high
+ */
+# define USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN BIT(24)
+
#define USBDRD_UCTL_SHIM_CFG 0xe8
#define USBDRD_UCTL_ECC 0xf0
#define USBDRD_UCTL_SPARE1 0xf8
-/* UAHC Configuration Register */
-union cvm_usbdrd_uctl_host_cfg {
- uint64_t u64;
- struct cvm_usbdrd_uctl_host_cfg_s {
- /* Reserved */
- __BITFIELD_FIELD(uint64_t reserved_60_63:4,
- /* Indicates minimum value of all received BELT values */
- __BITFIELD_FIELD(uint64_t host_current_belt:12,
- /* Reserved */
- __BITFIELD_FIELD(uint64_t reserved_38_47:10,
- /* HS jitter adjustment */
- __BITFIELD_FIELD(uint64_t fla:6,
- /* Reserved */
- __BITFIELD_FIELD(uint64_t reserved_29_31:3,
- /* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */
- __BITFIELD_FIELD(uint64_t bme:1,
- /* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */
- __BITFIELD_FIELD(uint64_t oci_en:1,
- /* Overcurrent sene selection:
- * 0x0 = Overcurrent indication from off-chip is active-low
- * 0x1 = Overcurrent indication from off-chip is active-high
- */
- __BITFIELD_FIELD(uint64_t oci_active_high_en:1,
- /* Port power control enable: 0x0 = unavailable, 0x1 = available */
- __BITFIELD_FIELD(uint64_t ppc_en:1,
- /* Port power control sense selection:
- * 0x0 = Port power to off-chip is active-low
- * 0x1 = Port power to off-chip is active-high
- */
- __BITFIELD_FIELD(uint64_t ppc_active_high_en:1,
- /* Reserved */
- __BITFIELD_FIELD(uint64_t reserved_0_23:24,
- ;)))))))))))
- } s;
-};
-
/* UCTL Shim Features Register */
union cvm_usbdrd_uctl_shim_cfg {
uint64_t u64;
@@ -224,12 +213,13 @@ static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
static int dwc3_octeon_config_power(struct device *dev, u64 base)
{
- union cvm_usbdrd_uctl_host_cfg uctl_host_cfg;
union cvmx_gpio_bit_cfgx gpio_bit;
uint32_t gpio_pwr[3];
int gpio, len, power_active_low;
struct device_node *node = dev->of_node;
int index = (base >> 24) & 1;
+ u64 val;
+ u64 uctl_host_cfg_reg = base + USBDRD_UCTL_HOST_CFG;
if (of_find_property(node, "power", &len) != NULL) {
if (len == 12) {
@@ -264,16 +254,19 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base)
}
/* Enable XHCI power control and set if active high or low. */
- uctl_host_cfg.u64 = cvmx_read_csr(base + USBDRD_UCTL_HOST_CFG);
- uctl_host_cfg.s.ppc_en = 1;
- uctl_host_cfg.s.ppc_active_high_en = !power_active_low;
- cvmx_write_csr(base + USBDRD_UCTL_HOST_CFG, uctl_host_cfg.u64);
+ val = cvmx_read_csr(uctl_host_cfg_reg);
+ val |= USBDRD_UCTL_HOST_PPC_EN;
+ if (power_active_low)
+ val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN;
+ else
+ val |= USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN;
+ cvmx_write_csr(uctl_host_cfg_reg, val);
} else {
/* Disable XHCI power control and set if active high. */
- uctl_host_cfg.u64 = cvmx_read_csr(base + USBDRD_UCTL_HOST_CFG);
- uctl_host_cfg.s.ppc_en = 0;
- uctl_host_cfg.s.ppc_active_high_en = 0;
- cvmx_write_csr(base + USBDRD_UCTL_HOST_CFG, uctl_host_cfg.u64);
+ val = cvmx_read_csr(uctl_host_cfg_reg);
+ val &= ~USBDRD_UCTL_HOST_PPC_EN;
+ val &= ~USBDRD_UCTL_HOST_PPC_ACTIVE_HIGH_EN;
+ cvmx_write_csr(uctl_host_cfg_reg, val);
dev_info(dev, "power control disabled\n");
}
return 0;