diff mbox series

[v2,1/2] pinctrl: qcom: lpass-lpi: split slew rate set to separate function

Message ID 20231013145935.220945-2-krzysztof.kozlowski@linaro.org
State Accepted
Commit 28bb7c555c7ebcc810ef49e3361d60c5acbd7b36
Headers show
Series pinctrl: qcom: lpass-lpi: allow slew rate bit in main pin config register | expand

Commit Message

Krzysztof Kozlowski Oct. 13, 2023, 2:59 p.m. UTC
Setting slew rate for each pin will grow with upcoming Qualcomm SoCs,
so split the code responsible for this into separate function for easier
readability and maintenance.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v2:
1. None
---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 53 +++++++++++++++---------
 1 file changed, 33 insertions(+), 20 deletions(-)

Comments

Konrad Dybcio Oct. 18, 2023, 8:51 a.m. UTC | #1
On 10/13/23 16:59, Krzysztof Kozlowski wrote:
> Setting slew rate for each pin will grow with upcoming Qualcomm SoCs,
> so split the code responsible for this into separate function for easier
> readability and maintenance.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Changes in v2:
> 1. None
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 9651aed048cf..4fb808545f7f 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -186,6 +186,35 @@  static int lpi_config_get(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static int lpi_config_set_slew_rate(struct lpi_pinctrl *pctrl,
+				    const struct lpi_pingroup *g,
+				    unsigned int group, unsigned int slew)
+{
+	unsigned long sval;
+	int slew_offset;
+
+	if (slew > LPI_SLEW_RATE_MAX) {
+		dev_err(pctrl->dev, "invalid slew rate %u for pin: %d\n",
+			slew, group);
+		return -EINVAL;
+	}
+
+	slew_offset = g->slew_offset;
+	if (slew_offset == LPI_NO_SLEW)
+		return 0;
+
+	mutex_lock(&pctrl->lock);
+
+	sval = ioread32(pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
+	sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
+	sval |= slew << slew_offset;
+	iowrite32(sval, pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
+
+	mutex_unlock(&pctrl->lock);
+
+	return 0;
+}
+
 static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 			  unsigned long *configs, unsigned int nconfs)
 {
@@ -193,8 +222,7 @@  static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 	unsigned int param, arg, pullup = LPI_GPIO_BIAS_DISABLE, strength = 2;
 	bool value, output_enabled = false;
 	const struct lpi_pingroup *g;
-	unsigned long sval;
-	int i, slew_offset;
+	int i, ret;
 	u32 val;
 
 	g = &pctrl->data->groups[group];
@@ -226,24 +254,9 @@  static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 			strength = arg;
 			break;
 		case PIN_CONFIG_SLEW_RATE:
-			if (arg > LPI_SLEW_RATE_MAX) {
-				dev_err(pctldev->dev, "invalid slew rate %u for pin: %d\n",
-					arg, group);
-				return -EINVAL;
-			}
-
-			slew_offset = g->slew_offset;
-			if (slew_offset == LPI_NO_SLEW)
-				break;
-
-			mutex_lock(&pctrl->lock);
-
-			sval = ioread32(pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
-			sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
-			sval |= arg << slew_offset;
-			iowrite32(sval, pctrl->slew_base + LPI_SLEW_RATE_CTL_REG);
-
-			mutex_unlock(&pctrl->lock);
+			ret = lpi_config_set_slew_rate(pctrl, g, group, arg);
+			if (ret)
+				return ret;
 			break;
 		default:
 			return -EINVAL;