@@ -374,6 +374,7 @@
/* Global HWPARAMS4 Register */
#define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13)
#define DWC3_MAX_HIBER_SCRATCHBUFS 15
+#define DWC3_EXT_BUFF_CONTROL BIT(21)
/* Global HWPARAMS6 Register */
#define DWC3_GHWPARAMS6_BCSUPPORT BIT(14)
@@ -673,6 +673,12 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1);
}
+ if (dep->endpoint.fifo_mode) {
+ if (!(dwc->hwparams.hwparams4 & DWC3_EXT_BUFF_CONTROL))
+ return -EINVAL;
+ params.param1 |= DWC3_DEPCFG_EBC_HWO_NOWB | DWC3_DEPCFG_USE_EBC;
+ }
+
return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms);
}
@@ -26,6 +26,8 @@ struct dwc3;
#define DWC3_DEPCFG_XFER_NOT_READY_EN BIT(10)
#define DWC3_DEPCFG_FIFO_ERROR_EN BIT(11)
#define DWC3_DEPCFG_STREAM_EVENT_EN BIT(13)
+#define DWC3_DEPCFG_EBC_HWO_NOWB BIT(14)
+#define DWC3_DEPCFG_USE_EBC BIT(15)
#define DWC3_DEPCFG_BINTERVAL_M1(n) (((n) & 0xff) << 16)
#define DWC3_DEPCFG_STREAM_CAPABLE BIT(24)
#define DWC3_DEPCFG_EP_NUMBER(n) (((n) & 0x1f) << 25)
@@ -236,6 +236,7 @@ struct usb_ep {
unsigned max_streams:16;
unsigned mult:2;
unsigned maxburst:5;
+ unsigned fifo_mode:1;
u8 address;
const struct usb_endpoint_descriptor *desc;
const struct usb_ss_ep_comp_descriptor *comp_desc;
Support configuration and use of bulk endpoints in the so-called EBC mode described in the DBC_usb31 databook (appendix E) Added a bit fifo_mode to usb_ep to indicate to the UDC driver that a specific endpoint is to operate in the EBC (or equivalent) mode when enabled Added macros for bits 15 and 14 of DEPCFG parameter 1 to indicate EBC mode and write back behaviour. These bits will be set to 1 when configuring an EBC endpoint as described in the programming guide Signed-off-by: Manan Aurora <maurora@google.com> --- drivers/usb/dwc3/core.h | 1 + drivers/usb/dwc3/gadget.c | 6 ++++++ drivers/usb/dwc3/gadget.h | 2 ++ include/linux/usb/gadget.h | 1 + 4 files changed, 10 insertions(+)