@@ -110,6 +110,17 @@ config TYPEC_WUSB3801
If you choose to build this driver as a dynamically linked module, the
module will be called wusb3801.ko.
+config TYPEC_SPRD_PMIC
+ tristate "SPRD Serials PMICs Typec Controller"
+ help
+ Say Y or M here if your system has a SPRD PMIC Type-C port controller.
+
+ If you choose to build this driver as a dynamically linked module, the
+ module will be called sprd_pmic_typec.ko.
+ SPRD_PMIC_TYPEC notify usb, phy, charger, and analog audio to proceed
+ with work
+
+
source "drivers/usb/typec/mux/Kconfig"
source "drivers/usb/typec/altmodes/Kconfig"
@@ -11,4 +11,5 @@ obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
obj-$(CONFIG_TYPEC_RT1719) += rt1719.o
obj-$(CONFIG_TYPEC_WUSB3801) += wusb3801.o
+obj-$(CONFIG_TYPEC_SPRD_PMIC) += sprd_pmic_typec.o
obj-$(CONFIG_TYPEC) += mux/
new file mode 100644
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Spreadtrum PMIC USB Type-C
+ *
+ * Copyright (C) 2023 Unisoc Inc.
+ */
+#include <linux/extcon.h>
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/typec.h>
+
+/* registers definitions for controller REGS_TYPEC */
+#define SC27XX_EN 0x00
+#define SC27XX_MODE 0x04
+#define SC27XX_INT_EN 0x0c
+#define SC27XX_INT_CLR 0x10
+#define SC27XX_INT_MASK 0x18
+#define SC27XX_STATUS 0x1c
+#define SC27XX_TCCDE_CNT 0x20
+#define SC27XX_RTRIM 0x3c
+
+/* SC27XX_TYPEC_EN */
+#define SC27XX_TYPEC_USB20_ONLY BIT(4)
+
+/* SC27XX_TYPEC MODE */
+#define SC27XX_MODE_SNK 0
+#define SC27XX_MODE_SRC 1
+#define SC27XX_MODE_DRP 2
+#define SC27XX_MODE_MASK 3
+
+/* SC27XX_INT_EN */
+#define SC27XX_ATTACH_INT_EN BIT(0)
+#define SC27XX_DETACH_INT_EN BIT(1)
+
+/* SC27XX_INT_MASK */
+#define SC27XX_ATTACH_INT BIT(0)
+#define SC27XX_DETACH_INT BIT(1)
+
+#define SC27XX_STATE_MASK GENMASK(4, 0)
+#define SC27XX_EVENT_MASK GENMASK(9, 0)
+
+#define SC2730_EFUSE_CC1_SHIFT 5
+#define SC2730_EFUSE_CC2_SHIFT 0
+
+#define SC27XX_CC1_MASK(n) GENMASK((n) + 4, (n))
+#define SC27XX_CC2_MASK(n) GENMASK((n) + 4, (n))
+#define SC27XX_CC_SHIFT(n) (n)
+
+/* modify sc2730 tcc debunce */
+#define SC27XX_TCC_DEBOUNCE_CNT 0xc7f
+
+/* pmic name number*/
+#define SC2730 0x01
+
+/* CC DETECT */
+#define SC2730_CC1_CHECK BIT(5)
+
+enum sprd_pmic_typec_connection_state {
+ TYPEC_DETACHED_SNK,
+ TYPEC_ATTACHWAIT_SNK,
+ TYPEC_ATTACHED_SNK,
+ TYPEC_DETACHED_SRC,
+ TYPEC_ATTACHWAIT_SRC,
+ TYPEC_ATTACHED_SRC,
+ TYPEC_POWERED_CABLE,
+ TYPEC_AUDIO_CABLE,
+ TYPEC_DEBUG_CABLE,
+ TYPEC_TOGGLE_SLEEP,
+ TYPEC_ERR_RECOV,
+ TYPEC_DISABLED,
+ TYPEC_TRY_SNK,
+ TYPEC_TRY_WAIT_SRC,
+ TYPEC_TRY_SRC,
+ TYPEC_TRY_WAIT_SNK,
+ TYPEC_UNSUPOORT_ACC,
+ TYPEC_ORIENTED_DEBUG,
+};
+
+struct sprd_pmic_typec_variant_data {
+ u8 pmic_number;
+ u32 efuse_cc1_shift;
+ u32 efuse_cc2_shift;
+ u32 int_en;
+ u32 int_clr;
+ u32 mode;
+ u32 attach_en;
+ u32 detach_en;
+ u32 state_mask;
+ u32 event_mask;
+};
+
+static const struct sprd_pmic_typec_variant_data sc2730_data = {
+ .pmic_number = SC2730,
+ .efuse_cc1_shift = SC2730_EFUSE_CC1_SHIFT,
+ .efuse_cc2_shift = SC2730_EFUSE_CC2_SHIFT,
+ .int_en = SC27XX_INT_EN,
+ .int_clr = SC27XX_INT_CLR,
+ .mode = SC27XX_MODE,
+ .attach_en = SC27XX_ATTACH_INT_EN,
+ .detach_en = SC27XX_DETACH_INT_EN,
+ .state_mask = SC27XX_STATE_MASK,
+ .event_mask = SC27XX_EVENT_MASK,
+};
+
+struct sprd_pmic_typec {
+ struct device *dev;
+ struct regmap *regmap;
+ u32 base;
+ int irq;
+ int mode;
+ struct extcon_dev *edev;
+ bool usb20_only;
+ bool partner_connected;
+
+ u8 pd_swap_evt;
+ spinlock_t lock;
+ enum sprd_pmic_typec_connection_state state;
+ enum sprd_pmic_typec_connection_state pre_state;
+ enum typec_cc_polarity cc_polarity;
+ struct typec_port *port;
+ struct typec_partner *partner;
+ struct typec_capability typec_cap;
+ const struct sprd_pmic_typec_variant_data *var_data;
+};
+
+static const char * const sprd_pmic_typec_cc_polarity_roles[] = {
+ [TYPEC_POLARITY_CC1] = "cc_1",
+ [TYPEC_POLARITY_CC2] = "cc_2",
+};
+
+static void typec_set_cc_polarity_role(struct sprd_pmic_typec *sc,
+ enum typec_cc_polarity polarity)
+{
+ if (sc->cc_polarity == polarity)
+ return;
+
+ sc->cc_polarity = polarity;
+ sysfs_notify(&sc->dev->kobj, NULL, "typec_cc_polarity_role");
+ kobject_uevent(&sc->dev->kobj, KOBJ_CHANGE);
+}
+
+static int sprd_pmic_typec_set_cc_polarity_role(struct sprd_pmic_typec *sc)
+{
+ enum typec_cc_polarity cc_polarity;
+ u32 val;
+ int ret;
+
+ ret = regmap_read(sc->regmap, sc->base + SC27XX_STATUS, &val);
+ if (ret < 0) {
+ dev_err(sc->dev, "failed to read STATUS register.\n");
+ return ret;
+ }
+
+ if (val & SC2730_CC1_CHECK)
+ cc_polarity = TYPEC_POLARITY_CC1;
+ else
+ cc_polarity = TYPEC_POLARITY_CC2;
+
+ typec_set_cc_polarity_role(sc, cc_polarity);
+
+ return ret;
+}
+
+static int sprd_pmic_typec_connect(struct sprd_pmic_typec *sc, u32 status)
+{
+ enum typec_data_role data_role = TYPEC_DEVICE;
+ enum typec_role power_role = TYPEC_SINK;
+ enum typec_role vconn_role = TYPEC_SINK;
+ struct typec_partner_desc desc;
+
+ if (sc->partner)
+ return 0;
+
+ switch (sc->state) {
+ case TYPEC_ATTACHED_SNK:
+ power_role = TYPEC_SINK;
+ data_role = TYPEC_DEVICE;
+ vconn_role = TYPEC_SINK;
+ break;
+ case TYPEC_ATTACHED_SRC:
+ power_role = TYPEC_SOURCE;
+ data_role = TYPEC_HOST;
+ vconn_role = TYPEC_SOURCE;
+ break;
+ }
+
+ desc.usb_pd = 0;
+ desc.identity = NULL;
+ if (sc->state == TYPEC_AUDIO_CABLE)
+ desc.accessory = TYPEC_ACCESSORY_AUDIO;
+ else if (sc->state == TYPEC_DEBUG_CABLE)
+ desc.accessory = TYPEC_ACCESSORY_DEBUG;
+ else
+ desc.accessory = TYPEC_ACCESSORY_NONE;
+
+ sc->partner = typec_register_partner(sc->port, &desc);
+ if (!sc->partner)
+ return -ENODEV;
+
+ typec_set_pwr_opmode(sc->port, TYPEC_PWR_MODE_USB);
+ typec_set_pwr_role(sc->port, power_role);
+ typec_set_data_role(sc->port, data_role);
+ typec_set_vconn_role(sc->port, vconn_role);
+
+ switch (sc->state) {
+ case TYPEC_ATTACHED_SNK:
+ sc->pre_state = TYPEC_ATTACHED_SNK;
+ /*notify USB, USB PHY, charger, and bc1p2 driver*/
+ extcon_set_state_sync(sc->edev, EXTCON_USB, true);
+ break;
+ case TYPEC_ATTACHED_SRC:
+ sc->pre_state = TYPEC_ATTACHED_SRC;
+ /*notify USB, USB PHY driver*/
+ extcon_set_state_sync(sc->edev, EXTCON_USB_HOST, true);
+ break;
+ case TYPEC_AUDIO_CABLE:
+ /*notify analog audio driver*/
+ sc->pre_state = TYPEC_AUDIO_CABLE;
+ extcon_set_state_sync(sc->edev, EXTCON_JACK_HEADPHONE, true);
+ break;
+ default:
+ break;
+ }
+
+ spin_lock(&sc->lock);
+ sc->partner_connected = true;
+ spin_unlock(&sc->lock);
+ sprd_pmic_typec_set_cc_polarity_role(sc);
+
+ return 0;
+}
+
+static void sprd_pmic_typec_disconnect(struct sprd_pmic_typec *sc, u32 status)
+{
+ typec_unregister_partner(sc->partner);
+ sc->partner = NULL;
+ typec_set_pwr_opmode(sc->port, TYPEC_PWR_MODE_USB);
+ typec_set_pwr_role(sc->port, TYPEC_SINK);
+ typec_set_data_role(sc->port, TYPEC_DEVICE);
+ typec_set_vconn_role(sc->port, TYPEC_SINK);
+
+ spin_lock(&sc->lock);
+ sc->partner_connected = false;
+ spin_unlock(&sc->lock);
+
+ switch (sc->pre_state) {
+ case TYPEC_ATTACHED_SNK:
+ extcon_set_state_sync(sc->edev, EXTCON_USB, false);
+ break;
+ case TYPEC_ATTACHED_SRC:
+ extcon_set_state_sync(sc->edev, EXTCON_USB_HOST, false);
+ break;
+ case TYPEC_AUDIO_CABLE:
+ extcon_set_state_sync(sc->edev, EXTCON_JACK_HEADPHONE, false);
+ break;
+ default:
+ break;
+ }
+ sc->pre_state = TYPEC_DETACHED_SNK;
+}
+
+static irqreturn_t sprd_pmic_typec_interrupt(int irq, void *data)
+{
+ struct sprd_pmic_typec *sc = data;
+ u32 event;
+ int ret;
+
+ dev_info(sc->dev, "%s enter line %d\n", __func__, __LINE__);
+ ret = regmap_read(sc->regmap, sc->base + SC27XX_INT_MASK, &event);
+ if (ret)
+ return ret;
+
+ event &= sc->var_data->event_mask;
+
+ ret = regmap_read(sc->regmap, sc->base + SC27XX_STATUS, &sc->state);
+ if (ret)
+ goto clear_ints;
+
+ sc->state &= sc->var_data->state_mask;
+
+ if (event & SC27XX_ATTACH_INT) {
+ ret = sprd_pmic_typec_connect(sc, sc->state);
+ if (ret)
+ dev_warn(sc->dev, "failed to register partner\n");
+ } else if (event & SC27XX_DETACH_INT) {
+ sprd_pmic_typec_disconnect(sc, sc->state);
+ }
+
+clear_ints:
+ regmap_write(sc->regmap, sc->base + sc->var_data->int_clr, event);
+
+ dev_info(sc->dev, "now works as DRP and is in %d state, event %d\n",
+ sc->state, event);
+ return IRQ_HANDLED;
+}
+
+static int sprd_pmic_typec_enable(struct sprd_pmic_typec *sc)
+{
+ int ret;
+ u32 val;
+
+ /* Set typec mode */
+ ret = regmap_read(sc->regmap, sc->base + sc->var_data->mode, &val);
+ if (ret)
+ return ret;
+
+ val &= ~SC27XX_MODE_MASK;
+ switch (sc->mode) {
+ case TYPEC_PORT_DFP:
+ val |= SC27XX_MODE_SRC;
+ break;
+ case TYPEC_PORT_UFP:
+ val |= SC27XX_MODE_SNK;
+ break;
+ case TYPEC_PORT_DRP:
+ val |= SC27XX_MODE_DRP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_write(sc->regmap, sc->base + sc->var_data->mode, val);
+ if (ret)
+ return ret;
+
+ /* typec USB20 only flag, only work in snk mode */
+ if (sc->typec_cap.data == TYPEC_PORT_UFP && sc->usb20_only) {
+ ret = regmap_update_bits(sc->regmap, sc->base + SC27XX_EN,
+ SC27XX_TYPEC_USB20_ONLY,
+ SC27XX_TYPEC_USB20_ONLY);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_write(sc->regmap, sc->base + SC27XX_TCCDE_CNT,
+ SC27XX_TCC_DEBOUNCE_CNT);
+ if (ret)
+ return ret;
+
+ /* Enable typec interrupt and enable typec */
+ ret = regmap_read(sc->regmap, sc->base + sc->var_data->int_en, &val);
+ if (ret)
+ return ret;
+
+ val |= sc->var_data->attach_en | sc->var_data->detach_en;
+ return regmap_write(sc->regmap, sc->base + sc->var_data->int_en, val);
+}
+
+/* Use extcon mechanism for port management, notify USB, USB PHY, charger,
+ * bc1p2, and analog audio drivers
+ */
+static const u32 sprd_pmic_typec_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_JACK_HEADPHONE,
+ EXTCON_NONE,
+};
+
+static int sprd_pmic_typec_get_cc1_efuse(struct sprd_pmic_typec *sc)
+{
+ struct nvmem_cell *cell;
+ u32 calib_data = 0;
+ void *buf;
+ size_t len;
+
+ cell = nvmem_cell_get(sc->dev, "typec_cc1_cal");
+ if (IS_ERR(cell))
+ return PTR_ERR(cell);
+
+ buf = nvmem_cell_read(cell, &len);
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ memcpy(&calib_data, buf, min(len, sizeof(u32)));
+ calib_data = (calib_data & SC27XX_CC1_MASK(sc->var_data->efuse_cc1_shift))
+ >> SC27XX_CC_SHIFT(sc->var_data->efuse_cc1_shift);
+ kfree(buf);
+
+ return calib_data;
+}
+
+static int sprd_pmic_typec_get_cc2_efuse(struct sprd_pmic_typec *sc)
+{
+ struct nvmem_cell *cell;
+ u32 calib_data = 0;
+ void *buf;
+ size_t len = 0;
+
+ cell = nvmem_cell_get(sc->dev, "typec_cc2_cal");
+ if (IS_ERR(cell))
+ return PTR_ERR(cell);
+
+ buf = nvmem_cell_read(cell, &len);
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ memcpy(&calib_data, buf, min(len, sizeof(u32)));
+ calib_data = (calib_data & SC27XX_CC2_MASK(sc->var_data->efuse_cc2_shift))
+ >> SC27XX_CC_SHIFT(sc->var_data->efuse_cc2_shift);
+ kfree(buf);
+
+ return calib_data;
+}
+
+static int sprd_pmic_typec_set_rtrim(struct sprd_pmic_typec *sc)
+{
+ int calib_cc1;
+ int calib_cc2;
+ u32 rtrim;
+
+ calib_cc1 = sprd_pmic_typec_get_cc1_efuse(sc);
+ if (calib_cc1 < 0)
+ return calib_cc1;
+ calib_cc2 = sprd_pmic_typec_get_cc2_efuse(sc);
+ if (calib_cc2 < 0)
+ return calib_cc2;
+
+ rtrim = calib_cc1 | calib_cc2<<5;
+
+ return regmap_write(sc->regmap, sc->base + SC27XX_RTRIM, rtrim);
+}
+
+static ssize_t
+sprd_pmic_typec_cc_polarity_role_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sprd_pmic_typec *sc = dev_get_drvdata(dev);
+
+ return snprintf(buf, 5, "%s\n", sprd_pmic_typec_cc_polarity_roles[sc->cc_polarity]);
+}
+static DEVICE_ATTR_RO(sprd_pmic_typec_cc_polarity_role);
+
+static struct attribute *sprd_pmic_typec_attrs[] = {
+ &dev_attr_sprd_pmic_typec_cc_polarity_role.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(sprd_pmic_typec);
+
+static int sprd_pmic_typec_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = pdev->dev.of_node;
+ struct sprd_pmic_typec *sc;
+ const struct sprd_pmic_typec_variant_data *pdata;
+ int mode, ret;
+
+ pdata = of_device_get_match_data(dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "No matching driver data found\n");
+ return -EINVAL;
+ }
+
+ sc = devm_kzalloc(&pdev->dev, sizeof(*sc), GFP_KERNEL);
+ if (!sc)
+ return -ENOMEM;
+
+ sc->edev = devm_extcon_dev_allocate(&pdev->dev, sprd_pmic_typec_cable);
+ if (IS_ERR(sc->edev)) {
+ dev_err(&pdev->dev, "failed to allocate extcon device\n");
+ return PTR_ERR(sc->edev);
+ }
+
+ ret = devm_extcon_dev_register(&pdev->dev, sc->edev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "can't register extcon device: %d\n", ret);
+ return ret;
+ }
+
+ sc->dev = &pdev->dev;
+ sc->irq = platform_get_irq(pdev, 0);
+ if (sc->irq < 0) {
+ dev_err(sc->dev, "failed to get typec interrupt.\n");
+ return sc->irq;
+ }
+
+ sc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!sc->regmap) {
+ dev_err(sc->dev, "failed to get regmap.\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(node, "reg", &sc->base);
+ if (ret) {
+ dev_err(dev, "failed to get reg offset!\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(node, "sprd,mode", &mode);
+ if (ret) {
+ dev_err(dev, "failed to get typec port mode type\n");
+ return ret;
+ }
+
+ if (mode < TYPEC_PORT_DFP || mode > TYPEC_PORT_DRP
+ || mode == TYPEC_PORT_UFP) {
+ mode = TYPEC_PORT_UFP;
+ sc->usb20_only = true;
+ dev_info(dev, "usb 2.0 only is enabled\n");
+ }
+
+ sc->var_data = pdata;
+ sc->mode = mode;
+ sc->typec_cap.type = mode;
+ sc->typec_cap.data = TYPEC_PORT_DRD;
+ sc->typec_cap.revision = USB_TYPEC_REV_1_2;
+ sc->typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
+ sc->port = typec_register_port(&pdev->dev, &sc->typec_cap);
+ if (!sc->port) {
+ dev_err(sc->dev, "failed to register port!\n");
+ return -ENODEV;
+ }
+ spin_lock_init(&sc->lock);
+
+ ret = sysfs_create_groups(&sc->dev->kobj, sprd_pmic_typec_groups);
+ if (ret < 0)
+ dev_err(sc->dev, "failed to create cc_polarity %d\n", ret);
+
+ ret = sprd_pmic_typec_set_rtrim(sc);
+ if (ret < 0) {
+ dev_err(sc->dev, "failed to set typec rtrim %d\n", ret);
+ goto error;
+ }
+
+ ret = devm_request_threaded_irq(sc->dev, sc->irq, NULL,
+ sprd_pmic_typec_interrupt,
+ IRQF_EARLY_RESUME | IRQF_ONESHOT,
+ dev_name(sc->dev), sc);
+ if (ret) {
+ dev_err(sc->dev, "failed to request irq %d\n", ret);
+ goto error;
+ }
+
+ ret = sprd_pmic_typec_enable(sc);
+ if (ret)
+ goto error;
+
+ platform_set_drvdata(pdev, sc);
+ return 0;
+
+error:
+ typec_unregister_port(sc->port);
+ return ret;
+}
+
+static int sprd_pmic_typec_remove(struct platform_device *pdev)
+{
+ struct sprd_pmic_typec *sc = platform_get_drvdata(pdev);
+
+ sysfs_remove_groups(&sc->dev->kobj, sprd_pmic_typec_groups);
+ sprd_pmic_typec_disconnect(sc, 0);
+ typec_unregister_port(sc->port);
+
+ return 0;
+}
+
+static const struct of_device_id sprd_pmic_typec_match[] = {
+ {.compatible = "sprd,sc2730-typec", .data = &sc2730_data},
+ {},
+};
+MODULE_DEVICE_TABLE(of, sprd_pmic_typec_match);
+
+static struct platform_driver sprd_pmic_typec_driver = {
+ .probe = sprd_pmic_typec_probe,
+ .remove = sprd_pmic_typec_remove,
+ .driver = {
+ .name = "sprd-typec",
+ .of_match_table = sprd_pmic_typec_match,
+ },
+};
+module_platform_driver(sprd_pmic_typec_driver);
+MODULE_DESCRIPTION("unisoc sprd_pmic_typec driver");
+MODULE_AUTHOR("XinHu Wu <xinhu.wu@unisoc.com>");
+MODULE_LICENSE("GPL");
Add Unisoc PMIC typec driver.The Unisoc PMIC typec driver handles the role and orientation detection, and notifies client drivers using extcon mechanism. Signed-off-by: Xinhu Wu <xinhu.wu@unisoc.com> --- drivers/usb/typec/Kconfig | 11 + drivers/usb/typec/Makefile | 1 + drivers/usb/typec/sprd_pmic_typec.c | 587 ++++++++++++++++++++++++++++ 3 files changed, 599 insertions(+) create mode 100644 drivers/usb/typec/sprd_pmic_typec.c