@@ -444,6 +444,25 @@ memory@80000000 {
reg = <0x0 0x80000000 0x0 0x0>;
};
+ mpm: interrupt-controller {
+ compatible = "qcom,mpm";
+ qcom,rpm-msg-ram = <&apss_mpm>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #power-domain-cells = <0>;
+ interrupt-parent = <&intc>;
+ qcom,mpm-pin-count = <96>;
+ qcom,mpm-pin-map = <2 184>, /* TSENS1 upper_lower_int */
+ <52 243>, /* DWC3_PRI ss_phy_irq */
+ <79 347>, /* DWC3_PRI hs_phy_irq */
+ <80 352>, /* DWC3_SEC hs_phy_irq */
+ <81 347>, /* QUSB2_PHY_PRI DP+DM */
+ <82 352>, /* QUSB2_PHY_SEC DP+DM */
+ <87 326>; /* SPMI */
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -733,8 +752,15 @@ pciephy_2: phy@3000 {
};
rpm_msg_ram: sram@68000 {
- compatible = "qcom,rpm-msg-ram";
+ compatible = "qcom,rpm-msg-ram", "mmio-sram";
reg = <0x00068000 0x6000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00068000 0x7000>;
+
+ apss_mpm: sram@1b8 {
+ reg = <0x1b8 0x48>;
+ };
};
qfprom@74000 {
@@ -820,8 +846,8 @@ tsens1: thermal-sensor@4ad000 {
reg = <0x004ad000 0x1000>, /* TM */
<0x004ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
@@ -1343,6 +1369,7 @@ tlmm: pinctrl@1010000 {
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 150>;
+ wakeup-parent = <&mpm>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -1870,7 +1897,7 @@ spmi_bus: spmi@400f000 {
<0x0400a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&mpm 87 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
@@ -3026,8 +3053,8 @@ usb3: usb@6af8800 {
#size-cells = <1>;
ranges;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&mpm 79 IRQ_TYPE_LEVEL_HIGH>,
+ <&mpm 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq";
clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
Wire up MPM and the interrupts it provides. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 39 +++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-)