@@ -25,6 +25,8 @@ struct ucsi_acpi {
unsigned long flags;
guid_t guid;
u64 cmd;
+ bool dell_quirk_probed;
+ bool dell_quirk_active;
};
static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func)
@@ -126,12 +128,73 @@ static const struct ucsi_operations ucsi_zenbook_ops = {
.async_write = ucsi_acpi_async_write
};
-static const struct dmi_system_id zenbook_dmi_id[] = {
+/*
+ * Some Dell laptops expect that an ACK command with the
+ * UCSI_ACK_CONNECTOR_CHANGE bit set is followed by a (separate)
+ * ACK command that only has the UCSI_ACK_COMMAND_COMPLETE bit set.
+ * If this is not done events are not delivered to OSPM and
+ * subsequent commands will timeout.
+ */
+static int
+ucsi_dell_sync_write(struct ucsi *ucsi, unsigned int offset,
+ const void *val, size_t val_len)
+{
+ struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
+ u64 cmd = *(u64 *)val, ack = 0;
+ int ret;
+
+ if (UCSI_COMMAND(cmd) == UCSI_ACK_CC_CI &&
+ cmd & UCSI_ACK_CONNECTOR_CHANGE)
+ ack = UCSI_ACK_CC_CI | UCSI_ACK_COMMAND_COMPLETE;
+
+ ret = ucsi_acpi_sync_write(ucsi, offset, val, val_len);
+ if (ret != 0)
+ return ret;
+ if (ack == 0)
+ return ret;
+
+ if (!ua->dell_quirk_probed) {
+ ua->dell_quirk_probed = true;
+
+ cmd = UCSI_GET_CAPABILITY;
+ ret = ucsi_acpi_sync_write(ucsi, UCSI_CONTROL, &cmd,
+ sizeof(cmd));
+ if (ret == 0)
+ return ucsi_acpi_sync_write(ucsi, UCSI_CONTROL,
+ &ack, sizeof(ack));
+ if (ret != -ETIMEDOUT)
+ return ret;
+
+ ua->dell_quirk_active = true;
+ dev_err(ua->dev, "Firmware bug: Additional ACK required after ACKing a connector change.\n");
+ dev_err(ua->dev, "Firmware bug: Enabling workaround\n");
+ }
+
+ if (!ua->dell_quirk_active)
+ return ret;
+
+ return ucsi_acpi_sync_write(ucsi, UCSI_CONTROL, &ack, sizeof(ack));
+}
+
+static const struct ucsi_operations ucsi_dell_ops = {
+ .read = ucsi_acpi_read,
+ .sync_write = ucsi_dell_sync_write,
+ .async_write = ucsi_acpi_async_write
+};
+
+static const struct dmi_system_id ucsi_acpi_quirks[] = {
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
},
+ .driver_data = (void *)&ucsi_zenbook_ops,
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ },
+ .driver_data = (void *)&ucsi_dell_ops,
},
{ }
};
@@ -160,6 +223,7 @@ static int ucsi_acpi_probe(struct platform_device *pdev)
{
struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
const struct ucsi_operations *ops = &ucsi_acpi_ops;
+ const struct dmi_system_id *id;
struct ucsi_acpi *ua;
struct resource *res;
acpi_status status;
@@ -189,8 +253,9 @@ static int ucsi_acpi_probe(struct platform_device *pdev)
init_completion(&ua->complete);
ua->dev = &pdev->dev;
- if (dmi_check_system(zenbook_dmi_id))
- ops = &ucsi_zenbook_ops;
+ id = dmi_first_match(ucsi_acpi_quirks);
+ if (id)
+ ops = id->driver_data;
ua->ucsi = ucsi_create(&pdev->dev, ops);
if (IS_ERR(ua->ucsi))
The PPM on some Dell laptops seems to expect that the ACK_CC_CI command to clear the connector change notification is in turn followed by another ACK_CC_CI to acknowledge the ACK_CC_CI command itself. This is in violation of the UCSI spec that states: "The only notification that is not acknowledged by the OPM is the command completion notification for the ACK_CC_CI or the PPM_RESET command." Add a quirk to send this ack anyway. Apply the quirk to all Dell systems. On the first command that acks a connector change send a dummy command to determine if it runs into a timeout. Only activate the quirk if it does. This ensure that we do not break Dell systems that do not need the quirk. Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> --- drivers/usb/typec/ucsi/ucsi_acpi.c | 71 ++++++++++++++++++++++++++++-- 1 file changed, 68 insertions(+), 3 deletions(-)