diff mbox series

[v18,2/9] usb: dwc3: core: Access XHCI address space temporarily to read port info

Message ID 20240326113253.3010447-3-quic_kriskura@quicinc.com
State Superseded
Headers show
Series None | expand

Commit Message

Krishna Kurapati March 26, 2024, 11:32 a.m. UTC
All DWC3 Multi Port controllers that exist today only support host mode.
Temporarily map XHCI address space for host-only controllers and parse
XHCI Extended Capabilities registers to read number of usb2 ports and
usb3 ports present on multiport controller. Each USB Port is at least HS
capable.

The port info for usb2 and usb3 phy are identified as num_usb2_ports
and num_usb3_ports. The intention is as follows:

Wherever we need to perform phy operations like:

LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS()
{
	phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
	phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
}

If number of usb2 ports is 3, loop can go from index 0-2 for
usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure,
if the first 2 ports are SS capable or some other ports like (2 and 3)
are SS capable. So instead, num_usb2_ports is used to loop around all
phy's (both hs and ss) for performing phy operations. If any
usb3_generic_phy turns out to be NULL, phy operation just bails out.
num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up
phy's as we need to know how many SS capable ports are there for this.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  5 ++++
 2 files changed, 66 insertions(+)

Comments

Thinh Nguyen April 2, 2024, 11:32 p.m. UTC | #1
On Tue, Mar 26, 2024, Krishna Kurapati wrote:
> All DWC3 Multi Port controllers that exist today only support host mode.
> Temporarily map XHCI address space for host-only controllers and parse
> XHCI Extended Capabilities registers to read number of usb2 ports and
> usb3 ports present on multiport controller. Each USB Port is at least HS
> capable.
> 
> The port info for usb2 and usb3 phy are identified as num_usb2_ports
> and num_usb3_ports. The intention is as follows:
> 
> Wherever we need to perform phy operations like:
> 
> LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS()
> {
> 	phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
> 	phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
> }
> 
> If number of usb2 ports is 3, loop can go from index 0-2 for
> usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure,
> if the first 2 ports are SS capable or some other ports like (2 and 3)
> are SS capable. So instead, num_usb2_ports is used to loop around all
> phy's (both hs and ss) for performing phy operations. If any
> usb3_generic_phy turns out to be NULL, phy operation just bails out.
> num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up
> phy's as we need to know how many SS capable ports are there for this.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++
>  drivers/usb/dwc3/core.h |  5 ++++
>  2 files changed, 66 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 3e55838c0001..fab7664c12c0 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -39,6 +39,7 @@
>  #include "io.h"
>  
>  #include "debug.h"
> +#include "../host/xhci-ext-caps.h"
>  
>  #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
>  
> @@ -1879,10 +1880,56 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
>  	return 0;
>  }
>  
> +static int dwc3_read_port_info(struct dwc3 *dwc)
> +{
> +	void __iomem *base;
> +	u8 major_revision;
> +	u32 offset;
> +	u32 val;
> +
> +	/*
> +	 * Remap xHCI address space to access XHCI ext cap regs since it is
> +	 * needed to get information on number of ports present.
> +	 */
> +	base = ioremap(dwc->xhci_resources[0].start,
> +		       resource_size(&dwc->xhci_resources[0]));
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);

Looks like you forgot to address some of the comments you said you'd
update previously if you submit a new version to the series.

[*] https://lore.kernel.org/linux-usb/af73110d-e13e-4183-af11-aed869ac0a31@quicinc.com/

BR,
Thinh

> +
> +	offset = 0;
> +	do {
> +		offset = xhci_find_next_ext_cap(base, offset,
> +						XHCI_EXT_CAPS_PROTOCOL);
> +		if (!offset)
> +			break;
> +
> +		val = readl(base + offset);
> +		major_revision = XHCI_EXT_PORT_MAJOR(val);
> +
> +		val = readl(base + offset + 0x08);
> +		if (major_revision == 0x03) {
> +			dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
> +		} else if (major_revision <= 0x02) {
> +			dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
> +		} else {
> +			dev_warn(dwc->dev, "unrecognized port major revision %d\n",
> +				 major_revision);
> +		}
> +	} while (1);
> +
> +	dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
> +		dwc->num_usb2_ports, dwc->num_usb3_ports);
> +
> +	iounmap(base);
> +
> +	return 0;
> +}
> +
>  static int dwc3_probe(struct platform_device *pdev)
>  {
>  	struct device		*dev = &pdev->dev;
>  	struct resource		*res, dwc_res;
> +	unsigned int		hw_mode;
>  	void __iomem		*regs;
>  	struct dwc3		*dwc;
>  	int			ret;
> @@ -1966,6 +2013,20 @@ static int dwc3_probe(struct platform_device *pdev)
>  			goto err_disable_clks;
>  	}
>  
> +	/*
> +	 * Currently only DWC3 controllers that are host-only capable
> +	 * can have more than one port.
> +	 */
> +	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
> +	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
> +		ret = dwc3_read_port_info(dwc);
> +		if (ret)
> +			goto err_disable_clks;
> +	} else {
> +		dwc->num_usb2_ports = 1;
> +		dwc->num_usb3_ports = 1;
> +	}
> +
>  	spin_lock_init(&dwc->lock);
>  	mutex_init(&dwc->mutex);
>  
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index c07edfc954f7..40b00a895a2a 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1039,6 +1039,8 @@ struct dwc3_scratchpad_array {
>   * @usb3_phy: pointer to USB3 PHY
>   * @usb2_generic_phy: pointer to USB2 PHY
>   * @usb3_generic_phy: pointer to USB3 PHY
> + * @num_usb2_ports: number of USB2 ports
> + * @num_usb3_ports: number of USB3 ports
>   * @phys_ready: flag to indicate that PHYs are ready
>   * @ulpi: pointer to ulpi interface
>   * @ulpi_ready: flag to indicate that ULPI is initialized
> @@ -1186,6 +1188,9 @@ struct dwc3 {
>  	struct phy		*usb2_generic_phy;
>  	struct phy		*usb3_generic_phy;
>  
> +	u8			num_usb2_ports;
> +	u8			num_usb3_ports;
> +
>  	bool			phys_ready;
>  
>  	struct ulpi		*ulpi;
> -- 
> 2.34.1
>
Krishna Kurapati April 3, 2024, 5:24 a.m. UTC | #2
On 4/3/2024 5:02 AM, Thinh Nguyen wrote:
> On Tue, Mar 26, 2024, Krishna Kurapati wrote:
>> All DWC3 Multi Port controllers that exist today only support host mode.
>> Temporarily map XHCI address space for host-only controllers and parse
>> XHCI Extended Capabilities registers to read number of usb2 ports and
>> usb3 ports present on multiport controller. Each USB Port is at least HS
>> capable.
>>
>> The port info for usb2 and usb3 phy are identified as num_usb2_ports
>> and num_usb3_ports. The intention is as follows:
>>
>> Wherever we need to perform phy operations like:
>>
>> LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS()
>> {
>> 	phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
>> 	phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
>> }
>>
>> If number of usb2 ports is 3, loop can go from index 0-2 for
>> usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure,
>> if the first 2 ports are SS capable or some other ports like (2 and 3)
>> are SS capable. So instead, num_usb2_ports is used to loop around all
>> phy's (both hs and ss) for performing phy operations. If any
>> usb3_generic_phy turns out to be NULL, phy operation just bails out.
>> num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up
>> phy's as we need to know how many SS capable ports are there for this.
>>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
>> ---
>>   drivers/usb/dwc3/core.c | 61 +++++++++++++++++++++++++++++++++++++++++
>>   drivers/usb/dwc3/core.h |  5 ++++
>>   2 files changed, 66 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 3e55838c0001..fab7664c12c0 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -39,6 +39,7 @@
>>   #include "io.h"
>>   
>>   #include "debug.h"
>> +#include "../host/xhci-ext-caps.h"
>>   
>>   #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
>>   
>> @@ -1879,10 +1880,56 @@ static int dwc3_get_clocks(struct dwc3 *dwc)
>>   	return 0;
>>   }
>>   
>> +static int dwc3_read_port_info(struct dwc3 *dwc)
>> +{
>> +	void __iomem *base;
>> +	u8 major_revision;
>> +	u32 offset;
>> +	u32 val;
>> +
>> +	/*
>> +	 * Remap xHCI address space to access XHCI ext cap regs since it is
>> +	 * needed to get information on number of ports present.
>> +	 */
>> +	base = ioremap(dwc->xhci_resources[0].start,
>> +		       resource_size(&dwc->xhci_resources[0]));
>> +	if (IS_ERR(base))
>> +		return PTR_ERR(base);
> 
> Looks like you forgot to address some of the comments you said you'd
> update previously if you submit a new version to the series.
> 
> [*] https://lore.kernel.org/linux-usb/af73110d-e13e-4183-af11-aed869ac0a31@quicinc.com/
> 

Apologies. I agree. I was too much focused on acpi removal and interrupt 
cleanup, I forgot the last comment you gave.

Can I send in a separate patch for this ?

Regards,
Krishna,
Johan Hovold April 3, 2024, 7:06 a.m. UTC | #3
On Wed, Apr 03, 2024 at 10:54:25AM +0530, Krishna Kurapati PSSNV wrote:
 
> >> +static int dwc3_read_port_info(struct dwc3 *dwc)
> >> +{
> >> +	void __iomem *base;
> >> +	u8 major_revision;
> >> +	u32 offset;
> >> +	u32 val;
> >> +
> >> +	/*
> >> +	 * Remap xHCI address space to access XHCI ext cap regs since it is
> >> +	 * needed to get information on number of ports present.
> >> +	 */
> >> +	base = ioremap(dwc->xhci_resources[0].start,
> >> +		       resource_size(&dwc->xhci_resources[0]));
> >> +	if (IS_ERR(base))
> >> +		return PTR_ERR(base);
> > 
> > Looks like you forgot to address some of the comments you said you'd
> > update previously if you submit a new version to the series.
> > 
> > [*] https://lore.kernel.org/linux-usb/af73110d-e13e-4183-af11-aed869ac0a31@quicinc.com/
> > 
> 
> Apologies. I agree. I was too much focused on acpi removal and interrupt 
> cleanup, I forgot the last comment you gave.
> 
> Can I send in a separate patch for this ?

The series has not been merged yet so you can address both issues in a
v19. Perhaps wait a day or two in case Thinh has further comments.

Johan
Krishna Kurapati April 3, 2024, 7:33 a.m. UTC | #4
On 4/3/2024 12:36 PM, Johan Hovold wrote:
> On Wed, Apr 03, 2024 at 10:54:25AM +0530, Krishna Kurapati PSSNV wrote:
>   
>>>> +static int dwc3_read_port_info(struct dwc3 *dwc)
>>>> +{
>>>> +	void __iomem *base;
>>>> +	u8 major_revision;
>>>> +	u32 offset;
>>>> +	u32 val;
>>>> +
>>>> +	/*
>>>> +	 * Remap xHCI address space to access XHCI ext cap regs since it is
>>>> +	 * needed to get information on number of ports present.
>>>> +	 */
>>>> +	base = ioremap(dwc->xhci_resources[0].start,
>>>> +		       resource_size(&dwc->xhci_resources[0]));
>>>> +	if (IS_ERR(base))
>>>> +		return PTR_ERR(base);
>>>
>>> Looks like you forgot to address some of the comments you said you'd
>>> update previously if you submit a new version to the series.
>>>
>>> [*] https://lore.kernel.org/linux-usb/af73110d-e13e-4183-af11-aed869ac0a31@quicinc.com/
>>>
>>
>> Apologies. I agree. I was too much focused on acpi removal and interrupt
>> cleanup, I forgot the last comment you gave.
>>
>> Can I send in a separate patch for this ?
> 
> The series has not been merged yet so you can address both issues in a
> v19. Perhaps wait a day or two in case Thinh has further comments.
> 

Sure Johan.

Also after making the following two changes:

1. Rename dwc3_read_port_info(...) to dwc3_get_num_ports(...)
2. Changing "if (IS_ERR(base))" to "if (!base)"

Can I still retain your RB tag ?

Regards,
Krishna,
Johan Hovold April 3, 2024, 7:40 a.m. UTC | #5
On Wed, Apr 03, 2024 at 01:03:21PM +0530, Krishna Kurapati PSSNV wrote:
> On 4/3/2024 12:36 PM, Johan Hovold wrote:

> > The series has not been merged yet so you can address both issues in a
> > v19. Perhaps wait a day or two in case Thinh has further comments.

> Also after making the following two changes:
> 
> 1. Rename dwc3_read_port_info(...) to dwc3_get_num_ports(...)
> 2. Changing "if (IS_ERR(base))" to "if (!base)"
>
> Can I still retain your RB tag ?

Yes, please do.

Johan
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3e55838c0001..fab7664c12c0 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -39,6 +39,7 @@ 
 #include "io.h"
 
 #include "debug.h"
+#include "../host/xhci-ext-caps.h"
 
 #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
 
@@ -1879,10 +1880,56 @@  static int dwc3_get_clocks(struct dwc3 *dwc)
 	return 0;
 }
 
+static int dwc3_read_port_info(struct dwc3 *dwc)
+{
+	void __iomem *base;
+	u8 major_revision;
+	u32 offset;
+	u32 val;
+
+	/*
+	 * Remap xHCI address space to access XHCI ext cap regs since it is
+	 * needed to get information on number of ports present.
+	 */
+	base = ioremap(dwc->xhci_resources[0].start,
+		       resource_size(&dwc->xhci_resources[0]));
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	offset = 0;
+	do {
+		offset = xhci_find_next_ext_cap(base, offset,
+						XHCI_EXT_CAPS_PROTOCOL);
+		if (!offset)
+			break;
+
+		val = readl(base + offset);
+		major_revision = XHCI_EXT_PORT_MAJOR(val);
+
+		val = readl(base + offset + 0x08);
+		if (major_revision == 0x03) {
+			dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val);
+		} else if (major_revision <= 0x02) {
+			dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val);
+		} else {
+			dev_warn(dwc->dev, "unrecognized port major revision %d\n",
+				 major_revision);
+		}
+	} while (1);
+
+	dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
+		dwc->num_usb2_ports, dwc->num_usb3_ports);
+
+	iounmap(base);
+
+	return 0;
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
 	struct resource		*res, dwc_res;
+	unsigned int		hw_mode;
 	void __iomem		*regs;
 	struct dwc3		*dwc;
 	int			ret;
@@ -1966,6 +2013,20 @@  static int dwc3_probe(struct platform_device *pdev)
 			goto err_disable_clks;
 	}
 
+	/*
+	 * Currently only DWC3 controllers that are host-only capable
+	 * can have more than one port.
+	 */
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+		ret = dwc3_read_port_info(dwc);
+		if (ret)
+			goto err_disable_clks;
+	} else {
+		dwc->num_usb2_ports = 1;
+		dwc->num_usb3_ports = 1;
+	}
+
 	spin_lock_init(&dwc->lock);
 	mutex_init(&dwc->mutex);
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c07edfc954f7..40b00a895a2a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1039,6 +1039,8 @@  struct dwc3_scratchpad_array {
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
  * @usb3_generic_phy: pointer to USB3 PHY
+ * @num_usb2_ports: number of USB2 ports
+ * @num_usb3_ports: number of USB3 ports
  * @phys_ready: flag to indicate that PHYs are ready
  * @ulpi: pointer to ulpi interface
  * @ulpi_ready: flag to indicate that ULPI is initialized
@@ -1186,6 +1188,9 @@  struct dwc3 {
 	struct phy		*usb2_generic_phy;
 	struct phy		*usb3_generic_phy;
 
+	u8			num_usb2_ports;
+	u8			num_usb3_ports;
+
 	bool			phys_ready;
 
 	struct ulpi		*ulpi;