@@ -54,6 +54,15 @@ properties:
$ref: '#/$defs/usbc-in-endpoint'
unevaluatedProperties: false
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+ properties:
+ endpoint:
+ $ref: '#/$defs/dp-endpoint'
+ unevaluatedProperties: false
+
oneOf:
- required:
- port
@@ -67,6 +76,19 @@ $defs:
$ref: /schemas/graph.yaml#/$defs/endpoint-base
description: Super Speed (SS) output endpoint to a type-c connector
unevaluatedProperties: false
+ properties:
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ An array of physical USB Type-C data lane indexes.
+ - 0 is SSRX1 lane
+ - 1 is SSTX1 lane
+ - 2 is SSTX2 lane
+ - 3 is SSRX2 lane
+ minItems: 4
+ maxItems: 4
+ items:
+ maximum: 3
usbc-in-endpoint:
$ref: /schemas/graph.yaml#/$defs/endpoint-base
@@ -81,7 +103,75 @@ $defs:
items:
maximum: 8
+ dp-endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ description: DisplayPort (DP) input from the DP PHY
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ An array of physical DP data lane indexes
+ - 0 is DP ML0 lane
+ - 1 is DP ML1 lane
+ - 2 is DP ML2 lane
+ - 3 is DP ML3 lane
+ oneOf:
+ - items:
+ - const: 0
+ - const: 1
+ - items:
+ - const: 0
+ - const: 1
+ - const: 2
+ - const: 3
+
examples:
+ # A USB + DP mode and orientation switch which muxes DP altmode
+ # and USB onto a usb-c-connector node.
+ - |
+ device {
+ mode-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint {
+ remote-endpoint = <&usb_c_connector>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint {
+ remote-endpoint = <&usb_ss_phy>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint {
+ remote-endpoint = <&dp_phy>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+
# A USB orientation switch which flips the pin orientation
# for a usb-c-connector node.
- |
Extend the usb-switch binding to support DisplayPort (DP) alternate modes. A third port for the DP signal is necessary when a mode-switch is muxing USB and DP together onto a usb type-c connector. Add data-lanes to the usbc output node to allow a device using this binding to remap the data lanes on the output. Add an example to show how this new port can be used. Cc: Rob Herring <robh+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Conor Dooley <conor+dt@kernel.org> Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Prashant Malani <pmalani@chromium.org> Cc: Tzung-Bi Shih <tzungbi@kernel.org> Cc: <devicetree@vger.kernel.org> Cc: <chrome-platform@lists.linux.dev> Cc: Pin-yen Lin <treapking@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- .../devicetree/bindings/usb/usb-switch.yaml | 90 +++++++++++++++++++ 1 file changed, 90 insertions(+)