diff mbox series

[V2,14/21] irqchip/riscv-intc: Add ACPI support

Message ID 20230216182043.1946553-15-sunilvl@ventanamicro.com
State Superseded
Headers show
Series Add basic ACPI support for RISC-V | expand

Commit Message

Sunil V L Feb. 16, 2023, 6:20 p.m. UTC
Add support for initializing the RISC-V INTC driver on ACPI
platforms.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/irqchip/irq-riscv-intc.c | 78 +++++++++++++++++++++++++++-----
 1 file changed, 66 insertions(+), 12 deletions(-)

Comments

Andrew Jones Feb. 20, 2023, 7:37 p.m. UTC | #1
On Thu, Feb 16, 2023 at 11:50:36PM +0530, Sunil V L wrote:
> Add support for initializing the RISC-V INTC driver on ACPI
> platforms.
> 
> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>  drivers/irqchip/irq-riscv-intc.c | 78 +++++++++++++++++++++++++++-----
>  1 file changed, 66 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
> index f229e3e66387..97a8db0fbc6c 100644
> --- a/drivers/irqchip/irq-riscv-intc.c
> +++ b/drivers/irqchip/irq-riscv-intc.c
> @@ -6,6 +6,7 @@
>   */
>  
>  #define pr_fmt(fmt) "riscv-intc: " fmt
> +#include <linux/acpi.h>
>  #include <linux/atomic.h>
>  #include <linux/bits.h>
>  #include <linux/cpu.h>
> @@ -112,6 +113,30 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
>  	return intc_domain->fwnode;
>  }
>  
> +static int __init riscv_intc_init_common(struct fwnode_handle *fn)
> +{
> +	int rc;
> +
> +	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
> +					       &riscv_intc_domain_ops, NULL);
> +	if (!intc_domain) {
> +		pr_err("unable to add IRQ domain\n");
> +		return -ENXIO;
> +	}
> +
> +	rc = set_handle_irq(&riscv_intc_irq);
> +	if (rc) {
> +		pr_err("failed to set irq handler\n");
> +		return rc;
> +	}
> +
> +	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
> +
> +	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
> +
> +	return 0;
> +}
> +
>  static int __init riscv_intc_init(struct device_node *node,
>  				  struct device_node *parent)
>  {
> @@ -133,24 +158,53 @@ static int __init riscv_intc_init(struct device_node *node,
>  	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
>  		return 0;
>  
> -	intc_domain = irq_domain_add_linear(node, BITS_PER_LONG,
> -					    &riscv_intc_domain_ops, NULL);
> -	if (!intc_domain) {
> -		pr_err("unable to add IRQ domain\n");
> -		return -ENXIO;
> -	}
> -
> -	rc = set_handle_irq(&riscv_intc_irq);
> +	rc = riscv_intc_init_common(of_node_to_fwnode(node));
>  	if (rc) {
> -		pr_err("failed to set irq handler\n");
> +		pr_err("failed to initialize INTC\n");
>  		return rc;
>  	}
>  
> -	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
> +	return 0;
> +}
>  
> -	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
> +IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
> +
> +#ifdef CONFIG_ACPI
> +
> +static int __init
> +riscv_intc_acpi_init(union acpi_subtable_headers *header,
> +		     const unsigned long end)

Please keep the function and its return type on the same line. We can go
to 100 chars.

> +{
> +	int rc;
> +	struct fwnode_handle *fn;
> +	struct acpi_madt_rintc *rintc;
> +
> +	rintc = (struct acpi_madt_rintc *)header;
> +
> +	/*
> +	 * The ACPI MADT will have one INTC for each CPU (or HART)
> +	 * so riscv_intc_acpi_init() function will be called once
> +	 * for each INTC. We only do INTC initialization
> +	 * for the INTC belonging to the boot CPU (or boot HART).
> +	 */
> +	if (riscv_hartid_to_cpuid(rintc->hart_id) != smp_processor_id())
> +		return 0;
> +
> +	fn = irq_domain_alloc_named_fwnode("RISCV-INTC");
> +	if (!fn) {
> +		pr_err("unable to allocate INTC FW node\n");
> +		return -ENOMEM;
> +	}
> +
> +	rc = riscv_intc_init_common(fn);
> +	if (rc) {
> +		pr_err("failed to initialize INTC\n");
> +		return rc;
> +	}
>  
>  	return 0;
>  }
>  
> -IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
> +IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL,
> +		     ACPI_MADT_RINTC_VERSION_V1, riscv_intc_acpi_init);
> +#endif
> -- 
> 2.34.1
>

Otherwise,

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Sunil V L Feb. 24, 2023, 12:29 p.m. UTC | #2
On Mon, Feb 20, 2023 at 08:37:14PM +0100, Andrew Jones wrote:
> On Thu, Feb 16, 2023 at 11:50:36PM +0530, Sunil V L wrote:
> > Add support for initializing the RISC-V INTC driver on ACPI
> > platforms.
> > 
> > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> >  drivers/irqchip/irq-riscv-intc.c | 78 +++++++++++++++++++++++++++-----
> >  1 file changed, 66 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
> > index f229e3e66387..97a8db0fbc6c 100644
> > --- a/drivers/irqchip/irq-riscv-intc.c
> > +++ b/drivers/irqchip/irq-riscv-intc.c
> > @@ -6,6 +6,7 @@
> >   */
> >  
> >  #define pr_fmt(fmt) "riscv-intc: " fmt
> > +#include <linux/acpi.h>
> >  #include <linux/atomic.h>
> >  #include <linux/bits.h>
> >  #include <linux/cpu.h>
> > @@ -112,6 +113,30 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
> >  	return intc_domain->fwnode;
> >  }
> >  
> > +static int __init riscv_intc_init_common(struct fwnode_handle *fn)
> > +{
> > +	int rc;
> > +
> > +	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
> > +					       &riscv_intc_domain_ops, NULL);
> > +	if (!intc_domain) {
> > +		pr_err("unable to add IRQ domain\n");
> > +		return -ENXIO;
> > +	}
> > +
> > +	rc = set_handle_irq(&riscv_intc_irq);
> > +	if (rc) {
> > +		pr_err("failed to set irq handler\n");
> > +		return rc;
> > +	}
> > +
> > +	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
> > +
> > +	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
> > +
> > +	return 0;
> > +}
> > +
> >  static int __init riscv_intc_init(struct device_node *node,
> >  				  struct device_node *parent)
> >  {
> > @@ -133,24 +158,53 @@ static int __init riscv_intc_init(struct device_node *node,
> >  	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
> >  		return 0;
> >  
> > -	intc_domain = irq_domain_add_linear(node, BITS_PER_LONG,
> > -					    &riscv_intc_domain_ops, NULL);
> > -	if (!intc_domain) {
> > -		pr_err("unable to add IRQ domain\n");
> > -		return -ENXIO;
> > -	}
> > -
> > -	rc = set_handle_irq(&riscv_intc_irq);
> > +	rc = riscv_intc_init_common(of_node_to_fwnode(node));
> >  	if (rc) {
> > -		pr_err("failed to set irq handler\n");
> > +		pr_err("failed to initialize INTC\n");
> >  		return rc;
> >  	}
> >  
> > -	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
> > +	return 0;
> > +}
> >  
> > -	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
> > +IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
> > +
> > +#ifdef CONFIG_ACPI
> > +
> > +static int __init
> > +riscv_intc_acpi_init(union acpi_subtable_headers *header,
> > +		     const unsigned long end)
> 
> Please keep the function and its return type on the same line. We can go
> to 100 chars.
> 
Yes, missed updating this instance. Thanks!

Thanks,
Sunil
diff mbox series

Patch

diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index f229e3e66387..97a8db0fbc6c 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -6,6 +6,7 @@ 
  */
 
 #define pr_fmt(fmt) "riscv-intc: " fmt
+#include <linux/acpi.h>
 #include <linux/atomic.h>
 #include <linux/bits.h>
 #include <linux/cpu.h>
@@ -112,6 +113,30 @@  static struct fwnode_handle *riscv_intc_hwnode(void)
 	return intc_domain->fwnode;
 }
 
+static int __init riscv_intc_init_common(struct fwnode_handle *fn)
+{
+	int rc;
+
+	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
+					       &riscv_intc_domain_ops, NULL);
+	if (!intc_domain) {
+		pr_err("unable to add IRQ domain\n");
+		return -ENXIO;
+	}
+
+	rc = set_handle_irq(&riscv_intc_irq);
+	if (rc) {
+		pr_err("failed to set irq handler\n");
+		return rc;
+	}
+
+	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
+
+	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+
+	return 0;
+}
+
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
@@ -133,24 +158,53 @@  static int __init riscv_intc_init(struct device_node *node,
 	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
 		return 0;
 
-	intc_domain = irq_domain_add_linear(node, BITS_PER_LONG,
-					    &riscv_intc_domain_ops, NULL);
-	if (!intc_domain) {
-		pr_err("unable to add IRQ domain\n");
-		return -ENXIO;
-	}
-
-	rc = set_handle_irq(&riscv_intc_irq);
+	rc = riscv_intc_init_common(of_node_to_fwnode(node));
 	if (rc) {
-		pr_err("failed to set irq handler\n");
+		pr_err("failed to initialize INTC\n");
 		return rc;
 	}
 
-	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
+	return 0;
+}
 
-	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
+IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
+
+#ifdef CONFIG_ACPI
+
+static int __init
+riscv_intc_acpi_init(union acpi_subtable_headers *header,
+		     const unsigned long end)
+{
+	int rc;
+	struct fwnode_handle *fn;
+	struct acpi_madt_rintc *rintc;
+
+	rintc = (struct acpi_madt_rintc *)header;
+
+	/*
+	 * The ACPI MADT will have one INTC for each CPU (or HART)
+	 * so riscv_intc_acpi_init() function will be called once
+	 * for each INTC. We only do INTC initialization
+	 * for the INTC belonging to the boot CPU (or boot HART).
+	 */
+	if (riscv_hartid_to_cpuid(rintc->hart_id) != smp_processor_id())
+		return 0;
+
+	fn = irq_domain_alloc_named_fwnode("RISCV-INTC");
+	if (!fn) {
+		pr_err("unable to allocate INTC FW node\n");
+		return -ENOMEM;
+	}
+
+	rc = riscv_intc_init_common(fn);
+	if (rc) {
+		pr_err("failed to initialize INTC\n");
+		return rc;
+	}
 
 	return 0;
 }
 
-IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
+IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC, NULL,
+		     ACPI_MADT_RINTC_VERSION_V1, riscv_intc_acpi_init);
+#endif