Show patches with: Submitter = Wesley Cheng       |    State = Action Required       |    Archived = No       |   23 patches
Patch Series S/W/F Date Submitter Delegate State
[v11,4/5] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default Re-introduce TX FIFO resize for larger EP bursting --- 2021-06-30 Wesley Cheng New
[v10,5/6] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default Re-introduce TX FIFO resize for larger EP bursting --- 2021-06-17 Wesley Cheng New
[v10,4/6] of: Add stub for of_add_property() Re-introduce TX FIFO resize for larger EP bursting --- 2021-06-17 Wesley Cheng New
[v10,2/6] usb: gadget: configfs: Check USB configuration before adding Re-introduce TX FIFO resize for larger EP bursting --- 2021-06-17 Wesley Cheng New
[v8,5/5] arm64: boot: dts: qcom: sm8150: Enable dynamic TX FIFO resize logic Re-introduce TX FIFO resize for larger EP bursting --- 2021-05-19 Wesley Cheng New
[v7,4/5] usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default Re-introduce TX FIFO resize for larger EP bursting --- 2021-01-29 Wesley Cheng New
[v7,3/5] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements Re-introduce TX FIFO resize for larger EP bursting --- 2021-01-29 Wesley Cheng New
[v6,3/4] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements Re-introduce TX FIFO resize for larger EP bursting --- 2021-01-22 Wesley Cheng New
[v6,1/4] usb: gadget: udc: core: Introduce check_config to verify USB configuration Re-introduce TX FIFO resize for larger EP bursting --- 2021-01-22 Wesley Cheng New
[v7,4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster Introduce PMIC based USB type C detection --- 2020-08-04 Wesley Cheng New
[v7,2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding Introduce PMIC based USB type C detection --- 2020-08-04 Wesley Cheng New
[v4,3/6] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block [v4,1/6] usb: typec: Add QCOM PMIC typec detection driver --- 2020-06-26 Wesley Cheng New
[RFC,v4,3/3] dt-bindings: usb: dwc3: Add entry for tx-fifo-resize [RFC,v4,1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements --- 2020-06-24 Wesley Cheng New
[v2,3/6] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block [v2,1/6] usb: typec: Add QCOM PMIC typec detection driver --- 2020-06-12 Wesley Cheng New
[v2,1/6] usb: typec: Add QCOM PMIC typec detection driver [v2,1/6] usb: typec: Add QCOM PMIC typec detection driver --- 2020-06-12 Wesley Cheng New
[RFC,1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements [RFC,1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements --- 2020-05-07 Wesley Cheng New
[v7,5/5] phy: qcom-qmp: Rename UFS PCS QMP v4 registers Untitled series #33838 --- 2020-04-13 Wesley Cheng New
[v4,4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB [v4,1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm --- 2020-03-30 Wesley Cheng New
[v3,2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs [v3,1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm --- 2020-03-25 Wesley Cheng New
[v2,3/4] phy: qcom-qmp: Add SM8150 QMP USB3 PHY support [v2,1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm --- 2020-03-23 Wesley Cheng New
[v2,2/2] arm64: dts: qcom: sm8150: Add USB and PHY device nodes Enable SS/HS USB support on SM8150 --- 2020-03-17 Wesley Cheng New
[4/4] phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB [1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm --- 2020-03-14 Wesley Cheng New
[1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm [1/4] dt-bindings: phy: Add binding for qcom,usb-hs-7nm --- 2020-03-14 Wesley Cheng New