@@ -82,12 +82,19 @@ static void rockchip_dfi_start_hardware_counter(struct devfreq_event_dev *edev)
writel_relaxed(HIWORD_UPDATE(0, 0xffff), dfi_regs + DDRMON_CTRL);
/* set ddr type to dfi */
- if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR3)
+ switch (dfi->ddr_type) {
+ case ROCKCHIP_DDRTYPE_LPDDR2:
+ case ROCKCHIP_DDRTYPE_LPDDR3:
writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR23, DDRMON_CTRL_DDR_TYPE_MASK),
dfi_regs + DDRMON_CTRL);
- else if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR4)
+ break;
+ case ROCKCHIP_DDRTYPE_LPDDR4:
writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR4, DDRMON_CTRL_DDR_TYPE_MASK),
dfi_regs + DDRMON_CTRL);
+ break;
+ default:
+ break;
+ }
/* enable count, use software mode */
writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_SOFTWARE_EN, DDRMON_CTRL_SOFTWARE_EN),
According to the downstream driver the DDRMON_CTRL_LPDDR23 bit must be set for both LPDDR2 and LPDDR3. Add the missing LPDDR2 case and while at it turn the if/else if/else into switch/case which makes it easier to read. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- drivers/devfreq/event/rockchip-dfi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)