@@ -170,9 +170,10 @@ struct qcom_pcie_resources_2_3_2 {
};
#define QCOM_PCIE_2_3_3_MAX_CLOCKS 5
+#define QCOM_PCIE_2_3_3_MAX_RESETS 7
struct qcom_pcie_resources_2_3_3 {
struct clk_bulk_data clks[QCOM_PCIE_2_3_3_MAX_CLOCKS];
- struct reset_control *rst[7];
+ struct reset_control_bulk_data rst[QCOM_PCIE_2_3_3_MAX_RESETS];
};
#define QCOM_PCIE_2_4_0_MAX_CLOCKS 4
@@ -889,10 +890,6 @@ static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- int i;
- const char *rst_names[] = { "axi_m", "axi_s", "pipe",
- "axi_m_sticky", "sticky",
- "ahb", "sleep", };
int ret;
res->clks[0].id = "iface";
@@ -905,11 +902,17 @@ static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
if (ret < 0)
return ret;
- for (i = 0; i < ARRAY_SIZE(rst_names); i++) {
- res->rst[i] = devm_reset_control_get(dev, rst_names[i]);
- if (IS_ERR(res->rst[i]))
- return PTR_ERR(res->rst[i]);
- }
+ res->rst[0].id = "axi_m";
+ res->rst[1].id = "axi_s";
+ res->rst[2].id = "pipe";
+ res->rst[3].id = "axi_m_sticky";
+ res->rst[4].id = "sticky";
+ res->rst[5].id = "ahb";
+ res->rst[6].id = "sleep";
+
+ ret = devm_reset_control_bulk_get_exclusive(dev, ARRAY_SIZE(res->rst), res->rst);
+ if (ret < 0)
+ return ret;
return 0;
}
@@ -926,25 +929,20 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
struct dw_pcie *pci = pcie->pci;
struct device *dev = pci->dev;
- int i, ret;
+ int ret;
- for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
- ret = reset_control_assert(res->rst[i]);
- if (ret) {
- dev_err(dev, "reset #%d assert failed (%d)\n", i, ret);
- return ret;
- }
+ ret = reset_control_bulk_assert(ARRAY_SIZE(res->rst), res->rst);
+ if (ret < 0) {
+ dev_err(dev, "cannot assert resets\n");
+ return ret;
}
usleep_range(2000, 2500);
- for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
- ret = reset_control_deassert(res->rst[i]);
- if (ret) {
- dev_err(dev, "reset #%d deassert failed (%d)\n", i,
- ret);
- return ret;
- }
+ ret = reset_control_bulk_deassert(ARRAY_SIZE(res->rst), res->rst);
+ if (ret < 0) {
+ dev_err(dev, "cannot deassert resets\n");
+ return ret;
}
/*
@@ -966,8 +964,7 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
* Not checking for failure, will anyway return
* the original failure in 'ret'.
*/
- for (i = 0; i < ARRAY_SIZE(res->rst); i++)
- reset_control_assert(res->rst[i]);
+ reset_control_bulk_assert(ARRAY_SIZE(res->rst), res->rst);
return ret;
}
All the resets are asserted and deasserted at the same time. So the bulk reset APIs can be used to handle them together. This simplifies the code a lot. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 49 ++++++++++++-------------- 1 file changed, 23 insertions(+), 26 deletions(-)