diff mbox series

[11/14] dt-bindings: pinctrl: add binding for Ralink MT7620 pinctrl

Message ID 20220413060729.27639-12-arinc.unal@arinc9.com
State Superseded
Headers show
Series Refactor Ralink Pinctrl and Add Documentation | expand

Commit Message

Arınç ÜNAL April 13, 2022, 6:07 a.m. UTC
Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
MT7688 SoCs.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../pinctrl/ralink,mt7620-pinctrl.yaml        | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml

Comments

Arınç ÜNAL April 14, 2022, 1:52 a.m. UTC | #1
On 13/04/2022 18:37, Krzysztof Kozlowski wrote:
> On 13/04/2022 08:07, Arınç ÜNAL wrote:
>> Add binding for the Ralink MT7620 pin controller for MT7620, MT7628 and
>> MT7688 SoCs.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>>   .../pinctrl/ralink,mt7620-pinctrl.yaml        | 87 +++++++++++++++++++
>>   1 file changed, 87 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..01578b8aa277
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
>> @@ -0,0 +1,87 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Ralink MT7620 Pin Controller
>> +
>> +maintainers:
>> +  - Arınç ÜNAL <arinc.unal@arinc9.com>
>> +  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
>> +
>> +description:
>> +  Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
>> +  The pin controller can only set the muxing of pin groups. Muxing indiviual pins
> 
> Run spellcheck on original bindings, don't copy same typos.

Will address, thanks!

> 
>> +  is not supported. There is no pinconf support.
>> +
>> +properties:
>> +  compatible:
>> +    const: ralink,mt7620-pinctrl
>> +
>> +patternProperties:
>> +  '-pins$':
>> +    type: object
>> +    patternProperties:
>> +      '^(.*-)?pinmux$':
> 
> Why do you have two levels here? pins->pinmux->actual pin configuration?

Yes, pins->pinmux->pin-configuration is currently how it's done.

> Cannot be something like brcm,bcm636x has?

Dunno, I'll take a look.

> 
>> +        type: object
>> +        description: node for pinctrl.
>> +        $ref: pinmux-node.yaml#
>> +
>> +        properties:
>> +          groups:
>> +            description: The pin group to select.
> 
> I wonder where do you configure particular pins because these are
> groups... It's a bit confusing to configure "i2c" group into "i2c" -
> looks obvious.

We don't configure each pin particularly. Ralink driver only supports 
muxing certain functions for certain pin groups as hinted on the binding 
description.

> 
>> +            enum: [
>> +              # For MT7620 SoC
>> +              ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
>> +
>> +              # For MT7628 and MT7688 SoCs
>> +              gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
>> +              p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
>> +              uart1, uart2, wdt, wled_an, wled_kn,
>> +            ]
>> +
>> +          function:
>> +            description: The mux function to select.
>> +            enum: [
>> +              # For MT7620 SoC
>> +              ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
>> +              pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
>> +              wdt refclk, wdt rst, wled,
>> +
>> +              # For MT7628 and MT7688 SoCs
>> +              antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
>> +              p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
>> +              pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
>> +              uart1, uart2, utif, wdt, wled_an, wled_kn, -,
> 
> All these lines do not fit in 80-character limit. Linux coding style
> still expects this in most of cases.

Ok, dt_binding_check warns after 110 characters so I made it fit that. 
I'll update to 80.

Arınç
Arınç ÜNAL April 14, 2022, 8:16 a.m. UTC | #2
On 14/04/2022 09:33, Krzysztof Kozlowski wrote:
> On 14/04/2022 03:52, Arınç ÜNAL wrote:
>>>
>>>> +  is not supported. There is no pinconf support.
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    const: ralink,mt7620-pinctrl
>>>> +
>>>> +patternProperties:
>>>> +  '-pins$':
>>>> +    type: object
>>>> +    patternProperties:
>>>> +      '^(.*-)?pinmux$':
>>>
>>> Why do you have two levels here? pins->pinmux->actual pin configuration?
>>
>> Yes, pins->pinmux->pin-configuration is currently how it's done.
> 
> It is currently done? Aren't you bringing here new bindings and new
> driver support?

I'm submitting bindings for the existing subdrivers. There's nothing new 
but refactoring and submitting the missing bindings.

Cheers.
Arınç
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
new file mode 100644
index 000000000000..01578b8aa277
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -0,0 +1,87 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7620 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
+  The pin controller can only set the muxing of pin groups. Muxing indiviual pins
+  is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt7620-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [
+              # For MT7620 SoC
+              ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi, spi refclk, uartf, uartlite, wdt, wled,
+
+              # For MT7628 and MT7688 SoCs
+              gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
+              p3led_kn, p4led_an, p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, spi cs1, spis, uart0,
+              uart1, uart2, wdt, wled_an, wled_kn,
+            ]
+
+          function:
+            description: The mux function to select.
+            enum: [
+              # For MT7620 SoC
+              ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand, pa, pcie refclk, pcie rst,
+              pcm gpio, pcm i2s, pcm uartf, refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
+              wdt refclk, wdt rst, wled,
+
+              # For MT7628 and MT7688 SoCs
+              antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+              p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
+              pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi, spi cs1, spis, sw_r, uart0,
+              uart1, uart2, utif, wdt, wled_an, wled_kn, -,
+            ]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,mt7620-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };