diff mbox series

[v2,1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings

Message ID 20230725193423.25047-2-quic_amelende@quicinc.com
State Superseded
Headers show
Series Add support for LUT PPG | expand

Commit Message

Anjelique Melendez July 25, 2023, 7:34 p.m. UTC
Add binding for the Qualcomm Programmable Boot Sequencer device.

Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
---
 .../bindings/soc/qcom/qcom-pbs.yaml           | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml

Comments

Rob Herring (Arm) July 25, 2023, 8:49 p.m. UTC | #1
On Tue, 25 Jul 2023 12:34:17 -0700, Anjelique Melendez wrote:
> Add binding for the Qualcomm Programmable Boot Sequencer device.
> 
> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
> ---
>  .../bindings/soc/qcom/qcom-pbs.yaml           | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/soc/qcom/qcom-pbs.example.dts:18.16-26.11: Warning (unit_address_vs_reg): /example-0/pmic@0: node has a unit name, but no reg or ranges property

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230725193423.25047-2-quic_amelende@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Krzysztof Kozlowski July 26, 2023, 7:53 a.m. UTC | #2
On 25/07/2023 21:34, Anjelique Melendez wrote:
> Add binding for the Qualcomm Programmable Boot Sequencer device.
> 
> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
> ---
>  .../bindings/soc/qcom/qcom-pbs.yaml           | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml


Again not tested.

Also, you missed comments. :(

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.


Best regards,
Krzysztof
Anjelique Melendez July 31, 2023, 6:19 p.m. UTC | #3
On 7/26/2023 12:53 AM, Krzysztof Kozlowski wrote:
> On 25/07/2023 21:34, Anjelique Melendez wrote:
>> Add binding for the Qualcomm Programmable Boot Sequencer device.
>>
>> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
>> ---
>>  .../bindings/soc/qcom/qcom-pbs.yaml           | 40 +++++++++++++++++++
>>  1 file changed, 40 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
> 
> 
> Again not tested.
> 
> Also, you missed comments. :(
> 
> This is a friendly reminder during the review process.
> 
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
> 
> Thank you.
> 
> 
> Best regards,
> Krzysztof
> 
Hi Krzysztof,

Sorry about the testing, found that my dt_binding_checker was out dated and that
is why it has not been picking up those dt_binding errors :/ 

I went back to take a look at the original comments I missed and just wanted to
list them for a quick double check.

1. Rename binding to be qcom,pbs so that it matches compatible
2. Include Soc specific compatibles i.e. 
   compatible:
     items:
       - enum:
         - qcom,pmi632-pbs
       - const: qcom,pbs
3. Fix the example node

Thanks,
Anjelique
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
new file mode 100644
index 000000000000..753a3e9cc5fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-pbs.yaml
@@ -0,0 +1,40 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom-pbs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Programmable Boot Sequencer
+
+maintainers:
+  - Anjelique Melendez <quic_amelende@quicinc.com>
+
+description: |
+  The Qualcomm Technologies, Inc. Programmable Boot Sequencer (PBS)
+  supports triggering power up and power down sequences for clients
+  upon request.
+
+properties:
+  compatible:
+    const: qcom,pmi632-pbs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic@0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pbs@7400 {
+        compatible = "qcom,pmi632-pbs";
+        reg = <0x7400>;
+      };
+    };