diff mbox series

[v2,2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG

Message ID 20230725193423.25047-3-quic_amelende@quicinc.com
State Superseded
Headers show
Series Add support for LUT PPG | expand

Commit Message

Anjelique Melendez July 25, 2023, 7:34 p.m. UTC
Update leds-qcom-lpg bindings to support LPG PPG.

Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
---
 .../bindings/leds/leds-qcom-lpg.yaml          | 92 ++++++++++++++++++-
 1 file changed, 91 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) Aug. 3, 2023, 12:25 a.m. UTC | #1
On Tue, Jul 25, 2023 at 12:34:18PM -0700, Anjelique Melendez wrote:
> Update leds-qcom-lpg bindings to support LPG PPG.
> 
> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
> ---
>  .../bindings/leds/leds-qcom-lpg.yaml          | 92 ++++++++++++++++++-
>  1 file changed, 91 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> index e6f1999cb22f..6feca859fb74 100644
> --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
> @@ -11,7 +11,7 @@ maintainers:
>  
>  description: >
>    The Qualcomm Light Pulse Generator consists of three different hardware blocks;
> -  a ramp generator with lookup table, the light pulse generator and a three
> +  a ramp generator with lookup table (LUT), the light pulse generator and a three
>    channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
>  
>  properties:
> @@ -63,6 +63,27 @@ properties:
>          - description: dtest line to attach
>          - description: flags for the attachment
>  
> +  nvmem:
> +    description: >
> +      This property is required for PMICs that supports PPG, which is when a
> +      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
> +      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
> +      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
> +      to both SDAM modules need to be specified.
> +    minItems: 1
> +    maxItems: 2
> +
> +  nvmem-names:
> +    minItems: 1
> +    maxItems: 2
> +
> +  qcom,pbs:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: >
> +      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
> +      PBS node is used to trigger LPG pattern sequences for PMICs that support
> +      single SDAM PPG.
> +
>    multi-led:
>      type: object
>      $ref: leds-class-multicolor.yaml#
> @@ -106,6 +127,44 @@ required:
>  
>  additionalProperties: false
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,pmi632-lpg
> +    then:
> +      properties:
> +        nvmem:
> +          maxItems: 1
> +        nvmem-names:
> +          items:
> +            - const: lpg_chan_sdam
> +        qcom,pbs:
> +          maxItems: 1
> +      required:
> +        - nvmem
> +        - nvmem-names
> +        - qcom,pbs
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,pm8350c-pwm
> +              - qcom,pm8550-pwm
> +    then:
> +      properties:
> +        nvmem:
> +          minItems: 2
> +        nvmem-names:
> +          items:
> +            - const: lpg_chan_sdam
> +            - const: lut_sdam

This can go into the main section and then here you just say 
'minItems: 2'. And similar for the 1st if/then.

> +      required:
> +        - nvmem
> +        - nvmem-names

Looks like these are always required.

> +
>  examples:
>    - |
>      #include <dt-bindings/leds/common.h>
> @@ -191,4 +250,35 @@ examples:
>        compatible = "qcom,pm8916-pwm";
>        #pwm-cells = <2>;
>      };
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +
> +    led-controller {
> +      compatible = "qcom,pmi632-lpg";
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      #pwm-cells = <2>;
> +      nvmem-names = "lpg_chan_sdam";
> +      nvmem = <&pmi632_sdam_7>;
> +      qcom,pbs = <&pmi632_pbs_client3>;
> +
> +      led@1 {
> +        reg = <1>;
> +        color = <LED_COLOR_ID_RED>;
> +        label = "red";
> +      };
> +
> +      led@2 {
> +        reg = <2>;
> +        color = <LED_COLOR_ID_GREEN>;
> +        label = "green";
> +      };
> +
> +      led@3 {
> +        reg = <3>;
> +        color = <LED_COLOR_ID_BLUE>;
> +        label = "blue";
> +      };
> +    };
> +
>  ...
> -- 
> 2.41.0
>
Anjelique Melendez Aug. 7, 2023, 8:03 p.m. UTC | #2
On 8/2/2023 5:25 PM, Rob Herring wrote:
> On Tue, Jul 25, 2023 at 12:34:18PM -0700, Anjelique Melendez wrote:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - qcom,pm8350c-pw
>> +              - qcom,pm8550-pwm
>> +    then:
>> +      properties:
>> +        nvmem:
>> +          minItems: 2
>> +        nvmem-names:
>> +          items:
>> +            - const: lpg_chan_sdam
>> +            - const: lut_sdam
> 
> This can go into the main section and then here you just say 
> 'minItems: 2'. And similar for the 1st if/then.
> 
ACK
>> +      required:
>> +        - nvmem
>> +        - nvmem-names
> 
> Looks like these are always required.
These are only required for the compatibles properties that do not
have lut peripherals. Right now this is is only for qcom,pmi632-lpg, 
qcom,pm8350c-pwm and qcom,pm8550-pwm.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
index e6f1999cb22f..6feca859fb74 100644
--- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -11,7 +11,7 @@  maintainers:
 
 description: >
   The Qualcomm Light Pulse Generator consists of three different hardware blocks;
-  a ramp generator with lookup table, the light pulse generator and a three
+  a ramp generator with lookup table (LUT), the light pulse generator and a three
   channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
 
 properties:
@@ -63,6 +63,27 @@  properties:
         - description: dtest line to attach
         - description: flags for the attachment
 
+  nvmem:
+    description: >
+      This property is required for PMICs that supports PPG, which is when a
+      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+      to both SDAM modules need to be specified.
+    minItems: 1
+    maxItems: 2
+
+  nvmem-names:
+    minItems: 1
+    maxItems: 2
+
+  qcom,pbs:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+      PBS node is used to trigger LPG pattern sequences for PMICs that support
+      single SDAM PPG.
+
   multi-led:
     type: object
     $ref: leds-class-multicolor.yaml#
@@ -106,6 +127,44 @@  required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi632-lpg
+    then:
+      properties:
+        nvmem:
+          maxItems: 1
+        nvmem-names:
+          items:
+            - const: lpg_chan_sdam
+        qcom,pbs:
+          maxItems: 1
+      required:
+        - nvmem
+        - nvmem-names
+        - qcom,pbs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8350c-pwm
+              - qcom,pm8550-pwm
+    then:
+      properties:
+        nvmem:
+          minItems: 2
+        nvmem-names:
+          items:
+            - const: lpg_chan_sdam
+            - const: lut_sdam
+      required:
+        - nvmem
+        - nvmem-names
+
 examples:
   - |
     #include <dt-bindings/leds/common.h>
@@ -191,4 +250,35 @@  examples:
       compatible = "qcom,pm8916-pwm";
       #pwm-cells = <2>;
     };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi632-lpg";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #pwm-cells = <2>;
+      nvmem-names = "lpg_chan_sdam";
+      nvmem = <&pmi632_sdam_7>;
+      qcom,pbs = <&pmi632_pbs_client3>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_RED>;
+        label = "red";
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        label = "green";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_BLUE>;
+        label = "blue";
+      };
+    };
+
 ...