diff mbox series

[v2,4/7] mfd: hi6421-spmi-pmic: Use generic_handle_irq_safe().

Message ID 20220131123404.175438-5-bigeasy@linutronix.de
State Superseded
Headers show
Series Provide and use generic_handle_irq_safe() where appropriate. | expand

Commit Message

Sebastian Andrzej Siewior Jan. 31, 2022, 12:34 p.m. UTC
generic_handle_irq() is invoked from a regular interrupt service
routine. This handler will become a forced-threaded handler on
PREEMPT_RT and will be invoked with enabled interrupts. The
generic_handle_irq() must be invoked with disabled interrupts in order
to avoid deadlocks.

Instead of manually disabling interrupts before invoking use
generic_handle_irq_safe() which can be invoked with enabled and disabled
interrupts.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/misc/hi6421v600-irq.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Lee Jones Jan. 31, 2022, 3:54 p.m. UTC | #1
On Mon, 31 Jan 2022, Sebastian Andrzej Siewior wrote:

> generic_handle_irq() is invoked from a regular interrupt service
> routine. This handler will become a forced-threaded handler on
> PREEMPT_RT and will be invoked with enabled interrupts. The
> generic_handle_irq() must be invoked with disabled interrupts in order
> to avoid deadlocks.
> 
> Instead of manually disabling interrupts before invoking use
> generic_handle_irq_safe() which can be invoked with enabled and disabled
> interrupts.
> 
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
>  drivers/misc/hi6421v600-irq.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

The subject line should be "misc".

> diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
> index 1c763796cf1fa..caa3de37698b0 100644
> --- a/drivers/misc/hi6421v600-irq.c
> +++ b/drivers/misc/hi6421v600-irq.c
> @@ -117,8 +117,8 @@ static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
>  			 * If both powerkey down and up IRQs are received,
>  			 * handle them at the right order
>  			 */
> -			generic_handle_irq(priv->irqs[POWERKEY_DOWN]);
> -			generic_handle_irq(priv->irqs[POWERKEY_UP]);
> +			generic_handle_irq_safe(priv->irqs[POWERKEY_DOWN]);
> +			generic_handle_irq_safe(priv->irqs[POWERKEY_UP]);
>  			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
>  		}
>  
> @@ -126,7 +126,7 @@ static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
>  			continue;
>  
>  		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
> -			generic_handle_irq(priv->irqs[offset + i * BITS_PER_BYTE]);
> +			generic_handle_irq_safe(priv->irqs[offset + i * BITS_PER_BYTE]);
>  		}
>  	}
>
diff mbox series

Patch

diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
index 1c763796cf1fa..caa3de37698b0 100644
--- a/drivers/misc/hi6421v600-irq.c
+++ b/drivers/misc/hi6421v600-irq.c
@@ -117,8 +117,8 @@  static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
 			 * If both powerkey down and up IRQs are received,
 			 * handle them at the right order
 			 */
-			generic_handle_irq(priv->irqs[POWERKEY_DOWN]);
-			generic_handle_irq(priv->irqs[POWERKEY_UP]);
+			generic_handle_irq_safe(priv->irqs[POWERKEY_DOWN]);
+			generic_handle_irq_safe(priv->irqs[POWERKEY_UP]);
 			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
 		}
 
@@ -126,7 +126,7 @@  static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
 			continue;
 
 		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
-			generic_handle_irq(priv->irqs[offset + i * BITS_PER_BYTE]);
+			generic_handle_irq_safe(priv->irqs[offset + i * BITS_PER_BYTE]);
 		}
 	}