@@ -410,11 +410,6 @@ config SUN_LDOMS
Say Y here is you want to support virtual devices via
Logical Domains.
-config PCIC_PCI
- bool
- depends on PCI && SPARC32 && !SPARC_LEON
- default y
-
config LEON_PCI
bool
depends on PCI && SPARC_LEON
deleted file mode 100644
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * pcic.h: JavaEngine 1 specific PCI definitions.
- *
- * Copyright (C) 1998 V. Roganov and G. Raiko
- */
-
-#ifndef __SPARC_PCIC_H
-#define __SPARC_PCIC_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/smp.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <asm/pbm.h>
-
-struct linux_pcic {
- void __iomem *pcic_regs;
- unsigned long pcic_io;
- void __iomem *pcic_config_space_addr;
- void __iomem *pcic_config_space_data;
- struct resource pcic_res_regs;
- struct resource pcic_res_io;
- struct resource pcic_res_cfg_addr;
- struct resource pcic_res_cfg_data;
- struct linux_pbm_info pbm;
- struct pcic_ca2irq *pcic_imap;
- int pcic_imdim;
-};
-
-#ifdef CONFIG_PCIC_PCI
-int pcic_present(void);
-int pcic_probe(void);
-void pci_time_init(void);
-void sun4m_pci_init_IRQ(void);
-#else
-static inline int pcic_present(void) { return 0; }
-static inline int pcic_probe(void) { return 0; }
-static inline void pci_time_init(void) {}
-static inline void sun4m_pci_init_IRQ(void) {}
-#endif
-#endif
-
-/* Size of PCI I/O space which we relocate. */
-#define PCI_SPACE_SIZE 0x1000000 /* 16 MB */
-
-/* PCIC Register Set. */
-#define PCI_DIAGNOSTIC_0 0x40 /* 32 bits */
-#define PCI_SIZE_0 0x44 /* 32 bits */
-#define PCI_SIZE_1 0x48 /* 32 bits */
-#define PCI_SIZE_2 0x4c /* 32 bits */
-#define PCI_SIZE_3 0x50 /* 32 bits */
-#define PCI_SIZE_4 0x54 /* 32 bits */
-#define PCI_SIZE_5 0x58 /* 32 bits */
-#define PCI_PIO_CONTROL 0x60 /* 8 bits */
-#define PCI_DVMA_CONTROL 0x62 /* 8 bits */
-#define PCI_DVMA_CONTROL_INACTIVITY_REQ (1<<0)
-#define PCI_DVMA_CONTROL_IOTLB_ENABLE (1<<0)
-#define PCI_DVMA_CONTROL_IOTLB_DISABLE 0
-#define PCI_DVMA_CONTROL_INACTIVITY_ACK (1<<4)
-#define PCI_INTERRUPT_CONTROL 0x63 /* 8 bits */
-#define PCI_CPU_INTERRUPT_PENDING 0x64 /* 32 bits */
-#define PCI_DIAGNOSTIC_1 0x68 /* 16 bits */
-#define PCI_SOFTWARE_INT_CLEAR 0x6a /* 16 bits */
-#define PCI_SOFTWARE_INT_SET 0x6e /* 16 bits */
-#define PCI_SYS_INT_PENDING 0x70 /* 32 bits */
-#define PCI_SYS_INT_PENDING_PIO 0x40000000
-#define PCI_SYS_INT_PENDING_DMA 0x20000000
-#define PCI_SYS_INT_PENDING_PCI 0x10000000
-#define PCI_SYS_INT_PENDING_APSR 0x08000000
-#define PCI_SYS_INT_TARGET_MASK 0x74 /* 32 bits */
-#define PCI_SYS_INT_TARGET_MASK_CLEAR 0x78 /* 32 bits */
-#define PCI_SYS_INT_TARGET_MASK_SET 0x7c /* 32 bits */
-#define PCI_SYS_INT_PENDING_CLEAR 0x83 /* 8 bits */
-#define PCI_SYS_INT_PENDING_CLEAR_ALL 0x80
-#define PCI_SYS_INT_PENDING_CLEAR_PIO 0x40
-#define PCI_SYS_INT_PENDING_CLEAR_DMA 0x20
-#define PCI_SYS_INT_PENDING_CLEAR_PCI 0x10
-#define PCI_IOTLB_CONTROL 0x84 /* 8 bits */
-#define PCI_INT_SELECT_LO 0x88 /* 16 bits */
-#define PCI_ARBITRATION_SELECT 0x8a /* 16 bits */
-#define PCI_INT_SELECT_HI 0x8c /* 16 bits */
-#define PCI_HW_INT_OUTPUT 0x8e /* 16 bits */
-#define PCI_IOTLB_RAM_INPUT 0x90 /* 32 bits */
-#define PCI_IOTLB_CAM_INPUT 0x94 /* 32 bits */
-#define PCI_IOTLB_RAM_OUTPUT 0x98 /* 32 bits */
-#define PCI_IOTLB_CAM_OUTPUT 0x9c /* 32 bits */
-#define PCI_SMBAR0 0xa0 /* 8 bits */
-#define PCI_MSIZE0 0xa1 /* 8 bits */
-#define PCI_PMBAR0 0xa2 /* 8 bits */
-#define PCI_SMBAR1 0xa4 /* 8 bits */
-#define PCI_MSIZE1 0xa5 /* 8 bits */
-#define PCI_PMBAR1 0xa6 /* 8 bits */
-#define PCI_SIBAR 0xa8 /* 8 bits */
-#define PCI_SIBAR_ADDRESS_MASK 0xf
-#define PCI_ISIZE 0xa9 /* 8 bits */
-#define PCI_ISIZE_16M 0xf
-#define PCI_ISIZE_32M 0xe
-#define PCI_ISIZE_64M 0xc
-#define PCI_ISIZE_128M 0x8
-#define PCI_ISIZE_256M 0x0
-#define PCI_PIBAR 0xaa /* 8 bits */
-#define PCI_CPU_COUNTER_LIMIT_HI 0xac /* 32 bits */
-#define PCI_CPU_COUNTER_LIMIT_LO 0xb0 /* 32 bits */
-#define PCI_CPU_COUNTER_LIMIT 0xb4 /* 32 bits */
-#define PCI_SYS_LIMIT 0xb8 /* 32 bits */
-#define PCI_SYS_COUNTER 0xbc /* 32 bits */
-#define PCI_SYS_COUNTER_OVERFLOW (1<<31) /* Limit reached */
-#define PCI_SYS_LIMIT_PSEUDO 0xc0 /* 32 bits */
-#define PCI_USER_TIMER_CONTROL 0xc4 /* 8 bits */
-#define PCI_USER_TIMER_CONFIG 0xc5 /* 8 bits */
-#define PCI_COUNTER_IRQ 0xc6 /* 8 bits */
-#define PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq) ((((sys_irq) & 0xf) << 4) | \
- ((cpu_irq) & 0xf))
-#define PCI_COUNTER_IRQ_SYS(v) (((v) >> 4) & 0xf)
-#define PCI_COUNTER_IRQ_CPU(v) ((v) & 0xf)
-#define PCI_PIO_ERROR_COMMAND 0xc7 /* 8 bits */
-#define PCI_PIO_ERROR_ADDRESS 0xc8 /* 32 bits */
-#define PCI_IOTLB_ERROR_ADDRESS 0xcc /* 32 bits */
-#define PCI_SYS_STATUS 0xd0 /* 8 bits */
-#define PCI_SYS_STATUS_RESET_ENABLE (1<<0)
-#define PCI_SYS_STATUS_RESET (1<<1)
-#define PCI_SYS_STATUS_WATCHDOG_RESET (1<<4)
-#define PCI_SYS_STATUS_PCI_RESET (1<<5)
-#define PCI_SYS_STATUS_PCI_RESET_ENABLE (1<<6)
-#define PCI_SYS_STATUS_PCI_SATTELITE_MODE (1<<7)
-
-#endif /* !(__SPARC_PCIC_H) */
@@ -73,7 +73,6 @@ obj-$(CONFIG_SPARC64) += pcr.o
obj-$(CONFIG_SPARC64) += nmi.o
obj-$(CONFIG_SPARC64_SMP) += cpumap.o
-obj-$(CONFIG_PCIC_PCI) += pcic.o
obj-$(CONFIG_LEON_PCI) += leon_pci.o
obj-$(CONFIG_SPARC_GRPCI2)+= leon_pci_grpci2.o
obj-$(CONFIG_SPARC_GRPCI1)+= leon_pci_grpci1.o
@@ -965,54 +965,6 @@ restore_current:
retl
nop
-#ifdef CONFIG_PCIC_PCI
-#include <asm/pcic.h>
-
- .align 4
- .globl linux_trap_ipi15_pcic
-linux_trap_ipi15_pcic:
- rd %wim, %l3
- SAVE_ALL
-
- /*
- * First deactivate NMI
- * or we cannot drop ET, cannot get window spill traps.
- * The busy loop is necessary because the PIO error
- * sometimes does not go away quickly and we trap again.
- */
- sethi %hi(pcic_regs), %o1
- ld [%o1 + %lo(pcic_regs)], %o2
-
- ! Get pending status for printouts later.
- ld [%o2 + PCI_SYS_INT_PENDING], %o0
-
- mov PCI_SYS_INT_PENDING_CLEAR_ALL, %o1
- stb %o1, [%o2 + PCI_SYS_INT_PENDING_CLEAR]
-1:
- ld [%o2 + PCI_SYS_INT_PENDING], %o1
- andcc %o1, ((PCI_SYS_INT_PENDING_PIO|PCI_SYS_INT_PENDING_PCI)>>24), %g0
- bne 1b
- nop
-
- or %l0, PSR_PIL, %l4
- wr %l4, 0x0, %psr
- WRITE_PAUSE
- wr %l4, PSR_ET, %psr
- WRITE_PAUSE
-
- call pcic_nmi
- add %sp, STACKFRAME_SZ, %o1 ! struct pt_regs *regs
- RESTORE_ALL
-
- .globl pcic_nmi_trap_patch
-pcic_nmi_trap_patch:
- sethi %hi(linux_trap_ipi15_pcic), %l3
- jmpl %l3 + %lo(linux_trap_ipi15_pcic), %g0
- rd %psr, %l0
- .word 0
-
-#endif /* CONFIG_PCIC_PCI */
-
.globl flushw_all
flushw_all:
save %sp, -0x40, %sp
@@ -19,7 +19,6 @@
#include <asm/cacheflush.h>
#include <asm/cpudata.h>
#include <asm/setup.h>
-#include <asm/pcic.h>
#include <asm/leon.h>
#include "kernel.h"
@@ -138,10 +138,6 @@ asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn);
/* windows.c */
void try_to_clear_window_buffer(struct pt_regs *regs, int who);
-/* pcic.c */
-extern void __iomem *pcic_regs;
-void pcic_nmi(unsigned int pend, struct pt_regs *regs);
-
/* time_32.c */
void __init time_init(void);
deleted file mode 100644
@@ -1,829 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * pcic.c: MicroSPARC-IIep PCI controller support
- *
- * Copyright (C) 1998 V. Roganov and G. Raiko
- *
- * Code is derived from Ultra/PCI PSYCHO controller support, see that
- * for author info.
- *
- * Support for diverse IIep based platforms by Pete Zaitcev.
- * CP-1200 by Eric Brower.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-
-#include <asm/swift.h> /* for cache flushing. */
-#include <asm/io.h>
-
-#include <linux/ctype.h>
-#include <linux/pci.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/interrupt.h>
-#include <linux/export.h>
-
-#include <asm/irq.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/pcic.h>
-#include <asm/timex.h>
-#include <asm/timer.h>
-#include <linux/uaccess.h>
-#include <asm/irq_regs.h>
-
-#include "kernel.h"
-#include "irq.h"
-
-/*
- * I studied different documents and many live PROMs both from 2.30
- * family and 3.xx versions. I came to the amazing conclusion: there is
- * absolutely no way to route interrupts in IIep systems relying on
- * information which PROM presents. We must hardcode interrupt routing
- * schematics. And this actually sucks. -- zaitcev 1999/05/12
- *
- * To find irq for a device we determine which routing map
- * is in effect or, in other words, on which machine we are running.
- * We use PROM name for this although other techniques may be used
- * in special cases (Gleb reports a PROMless IIep based system).
- * Once we know the map we take device configuration address and
- * find PCIC pin number where INT line goes. Then we may either program
- * preferred irq into the PCIC or supply the preexisting irq to the device.
- */
-struct pcic_ca2irq {
- unsigned char busno; /* PCI bus number */
- unsigned char devfn; /* Configuration address */
- unsigned char pin; /* PCIC external interrupt pin */
- unsigned char irq; /* Preferred IRQ (mappable in PCIC) */
- unsigned int force; /* Enforce preferred IRQ */
-};
-
-struct pcic_sn2list {
- char *sysname;
- struct pcic_ca2irq *intmap;
- int mapdim;
-};
-
-/*
- * JavaEngine-1 apparently has different versions.
- *
- * According to communications with Sun folks, for P2 build 501-4628-03:
- * pin 0 - parallel, audio;
- * pin 1 - Ethernet;
- * pin 2 - su;
- * pin 3 - PS/2 kbd and mouse.
- *
- * OEM manual (805-1486):
- * pin 0: Ethernet
- * pin 1: All EBus
- * pin 2: IGA (unused)
- * pin 3: Not connected
- * OEM manual says that 501-4628 & 501-4811 are the same thing,
- * only the latter has NAND flash in place.
- *
- * So far unofficial Sun wins over the OEM manual. Poor OEMs...
- */
-static struct pcic_ca2irq pcic_i_je1a[] = { /* 501-4811-03 */
- { 0, 0x00, 2, 12, 0 }, /* EBus: hogs all */
- { 0, 0x01, 1, 6, 1 }, /* Happy Meal */
- { 0, 0x80, 0, 7, 0 }, /* IGA (unused) */
-};
-
-/* XXX JS-E entry is incomplete - PCI Slot 2 address (pin 7)? */
-static struct pcic_ca2irq pcic_i_jse[] = {
- { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
- { 0, 0x01, 1, 6, 0 }, /* hme */
- { 0, 0x08, 2, 9, 0 }, /* VGA - we hope not used :) */
- { 0, 0x10, 6, 8, 0 }, /* PCI INTA# in Slot 1 */
- { 0, 0x18, 7, 12, 0 }, /* PCI INTA# in Slot 2, shared w. RTC */
- { 0, 0x38, 4, 9, 0 }, /* All ISA devices. Read 8259. */
- { 0, 0x80, 5, 11, 0 }, /* EIDE */
- /* {0,0x88, 0,0,0} - unknown device... PMU? Probably no interrupt. */
- { 0, 0xA0, 4, 9, 0 }, /* USB */
- /*
- * Some pins belong to non-PCI devices, we hardcode them in drivers.
- * sun4m timers - irq 10, 14
- * PC style RTC - pin 7, irq 4 ?
- * Smart card, Parallel - pin 4 shared with USB, ISA
- * audio - pin 3, irq 5 ?
- */
-};
-
-/* SPARCengine-6 was the original release name of CP1200.
- * The documentation differs between the two versions
- */
-static struct pcic_ca2irq pcic_i_se6[] = {
- { 0, 0x08, 0, 2, 0 }, /* SCSI */
- { 0, 0x01, 1, 6, 0 }, /* HME */
- { 0, 0x00, 3, 13, 0 }, /* EBus */
-};
-
-/*
- * Krups (courtesy of Varol Kaptan)
- * No documentation available, but it was easy to guess
- * because it was very similar to Espresso.
- *
- * pin 0 - kbd, mouse, serial;
- * pin 1 - Ethernet;
- * pin 2 - igs (we do not use it);
- * pin 3 - audio;
- * pin 4,5,6 - unused;
- * pin 7 - RTC (from P2 onwards as David B. says).
- */
-static struct pcic_ca2irq pcic_i_jk[] = {
- { 0, 0x00, 0, 13, 0 }, /* Ebus - serial and keyboard */
- { 0, 0x01, 1, 6, 0 }, /* hme */
-};
-
-/*
- * Several entries in this list may point to the same routing map
- * as several PROMs may be installed on the same physical board.
- */
-#define SN2L_INIT(name, map) \
- { name, map, ARRAY_SIZE(map) }
-
-static struct pcic_sn2list pcic_known_sysnames[] = {
- SN2L_INIT("SUNW,JavaEngine1", pcic_i_je1a), /* JE1, PROM 2.32 */
- SN2L_INIT("SUNW,JS-E", pcic_i_jse), /* PROLL JavaStation-E */
- SN2L_INIT("SUNW,SPARCengine-6", pcic_i_se6), /* SPARCengine-6/CP-1200 */
- SN2L_INIT("SUNW,JS-NC", pcic_i_jk), /* PROLL JavaStation-NC */
- SN2L_INIT("SUNW,JSIIep", pcic_i_jk), /* OBP JavaStation-NC */
- { NULL, NULL, 0 }
-};
-
-/*
- * Only one PCIC per IIep,
- * and since we have no SMP IIep, only one per system.
- */
-static int pcic0_up;
-static struct linux_pcic pcic0;
-
-void __iomem *pcic_regs;
-static volatile int pcic_speculative;
-static volatile int pcic_trapped;
-
-/* forward */
-unsigned int pcic_build_device_irq(struct platform_device *op,
- unsigned int real_irq);
-
-#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
-
-static int pcic_read_config_dword(unsigned int busno, unsigned int devfn,
- int where, u32 *value)
-{
- struct linux_pcic *pcic;
- unsigned long flags;
-
- pcic = &pcic0;
-
- local_irq_save(flags);
-#if 0 /* does not fail here */
- pcic_speculative = 1;
- pcic_trapped = 0;
-#endif
- writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
-#if 0 /* does not fail here */
- nop();
- if (pcic_trapped) {
- local_irq_restore(flags);
- *value = ~0;
- return 0;
- }
-#endif
- pcic_speculative = 2;
- pcic_trapped = 0;
- *value = readl(pcic->pcic_config_space_data + (where&4));
- nop();
- if (pcic_trapped) {
- pcic_speculative = 0;
- local_irq_restore(flags);
- *value = ~0;
- return 0;
- }
- pcic_speculative = 0;
- local_irq_restore(flags);
- return 0;
-}
-
-static int pcic_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- unsigned int v;
-
- if (bus->number != 0) return -EINVAL;
- switch (size) {
- case 1:
- pcic_read_config_dword(bus->number, devfn, where&~3, &v);
- *val = 0xff & (v >> (8*(where & 3)));
- return 0;
- case 2:
- if (where&1) return -EINVAL;
- pcic_read_config_dword(bus->number, devfn, where&~3, &v);
- *val = 0xffff & (v >> (8*(where & 3)));
- return 0;
- case 4:
- if (where&3) return -EINVAL;
- pcic_read_config_dword(bus->number, devfn, where&~3, val);
- return 0;
- }
- return -EINVAL;
-}
-
-static int pcic_write_config_dword(unsigned int busno, unsigned int devfn,
- int where, u32 value)
-{
- struct linux_pcic *pcic;
- unsigned long flags;
-
- pcic = &pcic0;
-
- local_irq_save(flags);
- writel(CONFIG_CMD(busno, devfn, where), pcic->pcic_config_space_addr);
- writel(value, pcic->pcic_config_space_data + (where&4));
- local_irq_restore(flags);
- return 0;
-}
-
-static int pcic_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- unsigned int v;
-
- if (bus->number != 0) return -EINVAL;
- switch (size) {
- case 1:
- pcic_read_config_dword(bus->number, devfn, where&~3, &v);
- v = (v & ~(0xff << (8*(where&3)))) |
- ((0xff&val) << (8*(where&3)));
- return pcic_write_config_dword(bus->number, devfn, where&~3, v);
- case 2:
- if (where&1) return -EINVAL;
- pcic_read_config_dword(bus->number, devfn, where&~3, &v);
- v = (v & ~(0xffff << (8*(where&3)))) |
- ((0xffff&val) << (8*(where&3)));
- return pcic_write_config_dword(bus->number, devfn, where&~3, v);
- case 4:
- if (where&3) return -EINVAL;
- return pcic_write_config_dword(bus->number, devfn, where, val);
- }
- return -EINVAL;
-}
-
-static struct pci_ops pcic_ops = {
- .read = pcic_read_config,
- .write = pcic_write_config,
-};
-
-/*
- * On sparc64 pcibios_init() calls pci_controller_probe().
- * We want PCIC probed little ahead so that interrupt controller
- * would be operational.
- */
-int __init pcic_probe(void)
-{
- struct linux_pcic *pcic;
- struct linux_prom_registers regs[PROMREG_MAX];
- struct linux_pbm_info* pbm;
- char namebuf[64];
- phandle node;
- int err;
-
- if (pcic0_up) {
- prom_printf("PCIC: called twice!\n");
- prom_halt();
- }
- pcic = &pcic0;
-
- node = prom_getchild (prom_root_node);
- node = prom_searchsiblings (node, "pci");
- if (node == 0)
- return -ENODEV;
- /*
- * Map in PCIC register set, config space, and IO base
- */
- err = prom_getproperty(node, "reg", (char*)regs, sizeof(regs));
- if (err == 0 || err == -1) {
- prom_printf("PCIC: Error, cannot get PCIC registers "
- "from PROM.\n");
- prom_halt();
- }
-
- pcic0_up = 1;
-
- pcic->pcic_res_regs.name = "pcic_registers";
- pcic->pcic_regs = ioremap(regs[0].phys_addr, regs[0].reg_size);
- if (!pcic->pcic_regs) {
- prom_printf("PCIC: Error, cannot map PCIC registers.\n");
- prom_halt();
- }
-
- pcic->pcic_res_io.name = "pcic_io";
- if ((pcic->pcic_io = (unsigned long)
- ioremap(regs[1].phys_addr, 0x10000)) == 0) {
- prom_printf("PCIC: Error, cannot map PCIC IO Base.\n");
- prom_halt();
- }
-
- pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr";
- if ((pcic->pcic_config_space_addr =
- ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == NULL) {
- prom_printf("PCIC: Error, cannot map "
- "PCI Configuration Space Address.\n");
- prom_halt();
- }
-
- /*
- * Docs say three least significant bits in address and data
- * must be the same. Thus, we need adjust size of data.
- */
- pcic->pcic_res_cfg_data.name = "pcic_cfg_data";
- if ((pcic->pcic_config_space_data =
- ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == NULL) {
- prom_printf("PCIC: Error, cannot map "
- "PCI Configuration Space Data.\n");
- prom_halt();
- }
-
- pbm = &pcic->pbm;
- pbm->prom_node = node;
- prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
- strcpy(pbm->prom_name, namebuf);
-
- prom_getstring(prom_root_node, "name", namebuf, 63); namebuf[63] = 0;
- {
- struct pcic_sn2list *p;
-
- for (p = pcic_known_sysnames; p->sysname != NULL; p++) {
- if (strcmp(namebuf, p->sysname) == 0)
- break;
- }
- pcic->pcic_imap = p->intmap;
- pcic->pcic_imdim = p->mapdim;
- }
- if (pcic->pcic_imap == NULL) {
- /*
- * We do not panic here for the sake of embedded systems.
- */
- printk("PCIC: System %s is unknown, cannot route interrupts\n",
- namebuf);
- }
-
- return 0;
-}
-
-static void __init pcic_pbm_scan_bus(struct linux_pcic *pcic)
-{
- struct linux_pbm_info *pbm = &pcic->pbm;
-
- pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, &pcic_ops, pbm);
- if (!pbm->pci_bus)
- return;
-
-#if 0 /* deadwood transplanted from sparc64 */
- pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node);
- pci_record_assignments(pbm, pbm->pci_bus);
- pci_assign_unassigned(pbm, pbm->pci_bus);
- pci_fixup_irq(pbm, pbm->pci_bus);
-#endif
- pci_bus_add_devices(pbm->pci_bus);
-}
-
-/*
- * Main entry point from the PCI subsystem.
- */
-static int __init pcic_init(void)
-{
- struct linux_pcic *pcic;
-
- /*
- * PCIC should be initialized at start of the timer.
- * So, here we report the presence of PCIC and do some magic passes.
- */
- if(!pcic0_up)
- return 0;
- pcic = &pcic0;
-
- /*
- * Switch off IOTLB translation.
- */
- writeb(PCI_DVMA_CONTROL_IOTLB_DISABLE,
- pcic->pcic_regs+PCI_DVMA_CONTROL);
-
- /*
- * Increase mapped size for PCI memory space (DMA access).
- * Should be done in that order (size first, address second).
- * Why we couldn't set up 4GB and forget about it? XXX
- */
- writel(0xF0000000UL, pcic->pcic_regs+PCI_SIZE_0);
- writel(0+PCI_BASE_ADDRESS_SPACE_MEMORY,
- pcic->pcic_regs+PCI_BASE_ADDRESS_0);
-
- pcic_pbm_scan_bus(pcic);
-
- return 0;
-}
-
-int pcic_present(void)
-{
- return pcic0_up;
-}
-
-static int pdev_to_pnode(struct linux_pbm_info *pbm, struct pci_dev *pdev)
-{
- struct linux_prom_pci_registers regs[PROMREG_MAX];
- int err;
- phandle node = prom_getchild(pbm->prom_node);
-
- while(node) {
- err = prom_getproperty(node, "reg",
- (char *)®s[0], sizeof(regs));
- if(err != 0 && err != -1) {
- unsigned long devfn = (regs[0].which_io >> 8) & 0xff;
- if(devfn == pdev->devfn)
- return node;
- }
- node = prom_getsibling(node);
- }
- return 0;
-}
-
-static inline struct pcidev_cookie *pci_devcookie_alloc(void)
-{
- return kmalloc(sizeof(struct pcidev_cookie), GFP_ATOMIC);
-}
-
-static void pcic_map_pci_device(struct linux_pcic *pcic,
- struct pci_dev *dev, int node)
-{
- char namebuf[64];
- unsigned long address;
- unsigned long flags;
- int j;
-
- if (node == 0 || node == -1) {
- strcpy(namebuf, "???");
- } else {
- prom_getstring(node, "name", namebuf, 63); namebuf[63] = 0;
- }
-
- for (j = 0; j < 6; j++) {
- address = dev->resource[j].start;
- if (address == 0) break; /* are sequential */
- flags = dev->resource[j].flags;
- if ((flags & IORESOURCE_IO) != 0) {
- if (address < 0x10000) {
- /*
- * A device responds to I/O cycles on PCI.
- * We generate these cycles with memory
- * access into the fixed map (phys 0x30000000).
- *
- * Since a device driver does not want to
- * do ioremap() before accessing PC-style I/O,
- * we supply virtual, ready to access address.
- *
- * Note that request_region()
- * works for these devices.
- *
- * XXX Neat trick, but it's a *bad* idea
- * to shit into regions like that.
- * What if we want to allocate one more
- * PCI base address...
- */
- dev->resource[j].start =
- pcic->pcic_io + address;
- dev->resource[j].end = 1; /* XXX */
- dev->resource[j].flags =
- (flags & ~IORESOURCE_IO) | IORESOURCE_MEM;
- } else {
- /*
- * OOPS... PCI Spec allows this. Sun does
- * not have any devices getting above 64K
- * so it must be user with a weird I/O
- * board in a PCI slot. We must remap it
- * under 64K but it is not done yet. XXX
- */
- pci_info(dev, "PCIC: Skipping I/O space at "
- "0x%lx, this will Oops if a driver "
- "attaches device '%s'\n", address,
- namebuf);
- }
- }
- }
-}
-
-static void
-pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
-{
- struct pcic_ca2irq *p;
- unsigned int real_irq;
- int i, ivec;
- char namebuf[64];
-
- if (node == 0 || node == -1) {
- strcpy(namebuf, "???");
- } else {
- prom_getstring(node, "name", namebuf, sizeof(namebuf));
- }
-
- if ((p = pcic->pcic_imap) == NULL) {
- dev->irq = 0;
- return;
- }
- for (i = 0; i < pcic->pcic_imdim; i++) {
- if (p->busno == dev->bus->number && p->devfn == dev->devfn)
- break;
- p++;
- }
- if (i >= pcic->pcic_imdim) {
- pci_info(dev, "PCIC: device %s not found in %d\n", namebuf,
- pcic->pcic_imdim);
- dev->irq = 0;
- return;
- }
-
- i = p->pin;
- if (i >= 0 && i < 4) {
- ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO);
- real_irq = ivec >> (i << 2) & 0xF;
- } else if (i >= 4 && i < 8) {
- ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
- real_irq = ivec >> ((i-4) << 2) & 0xF;
- } else { /* Corrupted map */
- pci_info(dev, "PCIC: BAD PIN %d\n", i); for (;;) {}
- }
-/* P3 */ /* printk("PCIC: device %s pin %d ivec 0x%x irq %x\n", namebuf, i, ivec, dev->irq); */
-
- /* real_irq means PROM did not bother to program the upper
- * half of PCIC. This happens on JS-E with PROM 3.11, for instance.
- */
- if (real_irq == 0 || p->force) {
- if (p->irq == 0 || p->irq >= 15) { /* Corrupted map */
- pci_info(dev, "PCIC: BAD IRQ %d\n", p->irq); for (;;) {}
- }
- pci_info(dev, "PCIC: setting irq %d at pin %d\n", p->irq,
- p->pin);
- real_irq = p->irq;
-
- i = p->pin;
- if (i >= 4) {
- ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI);
- ivec &= ~(0xF << ((i - 4) << 2));
- ivec |= p->irq << ((i - 4) << 2);
- writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_HI);
- } else {
- ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO);
- ivec &= ~(0xF << (i << 2));
- ivec |= p->irq << (i << 2);
- writew(ivec, pcic->pcic_regs+PCI_INT_SELECT_LO);
- }
- }
- dev->irq = pcic_build_device_irq(NULL, real_irq);
-}
-
-/*
- * Normally called from {do_}pci_scan_bus...
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev;
- struct linux_pcic *pcic;
- /* struct linux_pbm_info* pbm = &pcic->pbm; */
- int node;
- struct pcidev_cookie *pcp;
-
- if (!pcic0_up) {
- pci_info(bus, "pcibios_fixup_bus: no PCIC\n");
- return;
- }
- pcic = &pcic0;
-
- /*
- * Next crud is an equivalent of pbm = pcic_bus_to_pbm(bus);
- */
- if (bus->number != 0) {
- pci_info(bus, "pcibios_fixup_bus: nonzero bus 0x%x\n",
- bus->number);
- return;
- }
-
- list_for_each_entry(dev, &bus->devices, bus_list) {
- node = pdev_to_pnode(&pcic->pbm, dev);
- if(node == 0)
- node = -1;
-
- /* cookies */
- pcp = pci_devcookie_alloc();
- pcp->pbm = &pcic->pbm;
- pcp->prom_node = of_find_node_by_phandle(node);
- dev->sysdata = pcp;
-
- /* fixing I/O to look like memory */
- if ((dev->class>>16) != PCI_BASE_CLASS_BRIDGE)
- pcic_map_pci_device(pcic, dev, node);
-
- pcic_fill_irq(pcic, dev, node);
- }
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- struct resource *res;
- u16 cmd, oldcmd;
- int i;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- oldcmd = cmd;
-
- pci_dev_for_each_resource(dev, res, i) {
- /* Only set up the requested stuff */
- if (!(mask & (1<<i)))
- continue;
-
- if (res->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (res->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
-
- if (cmd != oldcmd) {
- pci_info(dev, "enabling device (%04x -> %04x)\n", oldcmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-/* Makes compiler happy */
-static volatile int pcic_timer_dummy;
-
-static void pcic_clear_clock_irq(void)
-{
- pcic_timer_dummy = readl(pcic0.pcic_regs+PCI_SYS_LIMIT);
-}
-
-/* CPU frequency is 100 MHz, timer increments every 4 CPU clocks */
-#define USECS_PER_JIFFY (1000000 / HZ)
-#define TICK_TIMER_LIMIT ((100 * 1000000 / 4) / HZ)
-
-static unsigned int pcic_cycles_offset(void)
-{
- u32 value, count;
-
- value = readl(pcic0.pcic_regs + PCI_SYS_COUNTER);
- count = value & ~PCI_SYS_COUNTER_OVERFLOW;
-
- if (value & PCI_SYS_COUNTER_OVERFLOW)
- count += TICK_TIMER_LIMIT;
- /*
- * We divide all by HZ
- * to have microsecond resolution and to avoid overflow
- */
- count = ((count / HZ) * USECS_PER_JIFFY) / (TICK_TIMER_LIMIT / HZ);
-
- /* Coordinate with the sparc_config.clock_rate setting */
- return count * 2;
-}
-
-void __init pci_time_init(void)
-{
- struct linux_pcic *pcic = &pcic0;
- unsigned long v;
- int timer_irq, irq;
- int err;
-
-#ifndef CONFIG_SMP
- /*
- * The clock_rate is in SBUS dimension.
- * We take into account this in pcic_cycles_offset()
- */
- sparc_config.clock_rate = SBUS_CLOCK_RATE / HZ;
- sparc_config.features |= FEAT_L10_CLOCKEVENT;
-#endif
- sparc_config.features |= FEAT_L10_CLOCKSOURCE;
- sparc_config.get_cycles_offset = pcic_cycles_offset;
-
- writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
- /* PROM should set appropriate irq */
- v = readb(pcic->pcic_regs+PCI_COUNTER_IRQ);
- timer_irq = PCI_COUNTER_IRQ_SYS(v);
- writel (PCI_COUNTER_IRQ_SET(timer_irq, 0),
- pcic->pcic_regs+PCI_COUNTER_IRQ);
- irq = pcic_build_device_irq(NULL, timer_irq);
- err = request_irq(irq, timer_interrupt,
- IRQF_TIMER, "timer", NULL);
- if (err) {
- prom_printf("time_init: unable to attach IRQ%d\n", timer_irq);
- prom_halt();
- }
- local_irq_enable();
-}
-
-
-#if 0
-static void watchdog_reset() {
- writeb(0, pcic->pcic_regs+PCI_SYS_STATUS);
-}
-#endif
-
-/*
- * NMI
- */
-void pcic_nmi(unsigned int pend, struct pt_regs *regs)
-{
- pend = swab32(pend);
-
- if (!pcic_speculative || (pend & PCI_SYS_INT_PENDING_PIO) == 0) {
- /*
- * XXX On CP-1200 PCI #SERR may happen, we do not know
- * what to do about it yet.
- */
- printk("Aiee, NMI pend 0x%x pc 0x%x spec %d, hanging\n",
- pend, (int)regs->pc, pcic_speculative);
- for (;;) { }
- }
- pcic_speculative = 0;
- pcic_trapped = 1;
- regs->pc = regs->npc;
- regs->npc += 4;
-}
-
-static inline unsigned long get_irqmask(int irq_nr)
-{
- return 1 << irq_nr;
-}
-
-static void pcic_mask_irq(struct irq_data *data)
-{
- unsigned long mask, flags;
-
- mask = (unsigned long)data->chip_data;
- local_irq_save(flags);
- writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_SET);
- local_irq_restore(flags);
-}
-
-static void pcic_unmask_irq(struct irq_data *data)
-{
- unsigned long mask, flags;
-
- mask = (unsigned long)data->chip_data;
- local_irq_save(flags);
- writel(mask, pcic0.pcic_regs+PCI_SYS_INT_TARGET_MASK_CLEAR);
- local_irq_restore(flags);
-}
-
-static unsigned int pcic_startup_irq(struct irq_data *data)
-{
- irq_link(data->irq);
- pcic_unmask_irq(data);
- return 0;
-}
-
-static struct irq_chip pcic_irq = {
- .name = "pcic",
- .irq_startup = pcic_startup_irq,
- .irq_mask = pcic_mask_irq,
- .irq_unmask = pcic_unmask_irq,
-};
-
-unsigned int pcic_build_device_irq(struct platform_device *op,
- unsigned int real_irq)
-{
- unsigned int irq;
- unsigned long mask;
-
- irq = 0;
- mask = get_irqmask(real_irq);
- if (mask == 0)
- goto out;
-
- irq = irq_alloc(real_irq, real_irq);
- if (irq == 0)
- goto out;
-
- irq_set_chip_and_handler_name(irq, &pcic_irq,
- handle_level_irq, "PCIC");
- irq_set_chip_data(irq, (void *)mask);
-
-out:
- return irq;
-}
-
-
-static void pcic_load_profile_irq(int cpu, unsigned int limit)
-{
- printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
-}
-
-void __init sun4m_pci_init_IRQ(void)
-{
- sparc_config.build_device_irq = pcic_build_device_irq;
- sparc_config.clear_clock_irq = pcic_clear_clock_irq;
- sparc_config.load_profile_irq = pcic_load_profile_irq;
-}
-
-subsys_initcall(pcic_init);
@@ -43,7 +43,6 @@
#include <asm/io.h>
#include <asm/idprom.h>
#include <asm/page.h>
-#include <asm/pcic.h>
#include <asm/irq_regs.h>
#include <asm/setup.h>
@@ -347,9 +346,6 @@ void __init time_init(void)
sparc_config.features = 0;
late_time_init = sparc32_late_time_init;
- if (pcic_present())
- pci_time_init();
- else
- sbus_time_init();
+ sbus_time_init();
}