Message ID | 20190610171103.30903-3-grygorii.strashko@ti.com |
---|---|
State | New |
Headers | show |
Series | [PATCH-next,01/20] gpio: gpio-omap: ensure irq is enabled before wakeup | expand |
On Mon, Jun 10, 2019 at 7:11 PM Grygorii Strashko <grygorii.strashko@ti.com> wrote: > From: Russell King <rmk+kernel@armlinux.org.uk> > > Commit 384ebe1c2849 ("gpio/omap: Add DT support to GPIO driver") added > the register definition tables to the gpio-omap driver. Subsequently to > that commit, commit 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx() > checks from *_runtime_resume()") added definitions for irqstatus_raw* > registers to the legacy OMAP4 definitions, but missed the DT > definitions. > > This causes an unintentional change of behaviour for the 1.101 errata > workaround on OMAP4 platforms. Fix this oversight. > > Fixes: 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()") > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Patch applied. Yours, Linus Walleij
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 2c6d46396834..44b214e5cefb 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1457,6 +1457,8 @@ static struct omap_gpio_reg_offs omap4_gpio_regs = { .clr_dataout = OMAP4_GPIO_CLEARDATAOUT, .irqstatus = OMAP4_GPIO_IRQSTATUS0, .irqstatus2 = OMAP4_GPIO_IRQSTATUS1, + .irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0, + .irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1, .irqenable = OMAP4_GPIO_IRQSTATUSSET0, .irqenable2 = OMAP4_GPIO_IRQSTATUSSET1, .set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,