| Message ID | 20201231153141.25525-1-prabhakar.mahadev-lad.rj@bp.renesas.com |
|---|---|
| State | Accepted |
| Commit | 0521ae0107f77301040a3bb653303d57d991063e |
| Headers | show |
| Series | gpio: rcar: Remove redundant compatible values | expand |
Hi Prabhakar, On Thu, Dec 31, 2020 at 4:31 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been > already added to all the respective R-Car Gen{1,2,3} SoC DTSI files, > remove the redundant device specific values from the driver. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Thanks for your patch! > --- a/drivers/gpio/gpio-rcar.c > +++ b/drivers/gpio/gpio-rcar.c > @@ -392,33 +392,6 @@ static const struct gpio_rcar_info gpio_rcar_info_gen2 = { > > static const struct of_device_id gpio_rcar_of_table[] = { > { > - .compatible = "renesas,gpio-r8a7743", > - /* RZ/G1 GPIO is identical to R-Car Gen2. */ > - .data = &gpio_rcar_info_gen2, > - }, { > - .compatible = "renesas,gpio-r8a7790", > - .data = &gpio_rcar_info_gen2, > - }, { > - .compatible = "renesas,gpio-r8a7791", > - .data = &gpio_rcar_info_gen2, > - }, { > - .compatible = "renesas,gpio-r8a7792", > - .data = &gpio_rcar_info_gen2, > - }, { > - .compatible = "renesas,gpio-r8a7793", > - .data = &gpio_rcar_info_gen2, > - }, { > - .compatible = "renesas,gpio-r8a7794", > - .data = &gpio_rcar_info_gen2, > - }, { > - .compatible = "renesas,gpio-r8a7795", > - /* Gen3 GPIO is identical to Gen2. */ > - .data = &gpio_rcar_info_gen2, > - }, { > - .compatible = "renesas,gpio-r8a7796", > - /* Gen3 GPIO is identical to Gen2. */ > - .data = &gpio_rcar_info_gen2, > - }, { > .compatible = "renesas,rcar-gen1-gpio", > .data = &gpio_rcar_info_gen1, > }, { The reason the driver matches on these SoC-specific compatible values is that originally the family-specific compatible values did not exist, and the device nodes in the initial DTS files thus did not use them. The family-specific compatible values were added to the DTS files in v4.15. However, as this was backported to all v4.14-based R-Car BSP releases (3.6.0 and later), I think it is safe to apply this. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On Mon, Jan 4, 2021 at 11:36 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > Hi Prabhakar, > > On Thu, Dec 31, 2020 at 4:31 PM Lad Prabhakar > <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been > > already added to all the respective R-Car Gen{1,2,3} SoC DTSI files, > > remove the redundant device specific values from the driver. > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > > Thanks for your patch! > > > --- a/drivers/gpio/gpio-rcar.c > > +++ b/drivers/gpio/gpio-rcar.c > > @@ -392,33 +392,6 @@ static const struct gpio_rcar_info gpio_rcar_info_gen2 = { > > > > static const struct of_device_id gpio_rcar_of_table[] = { > > { > > - .compatible = "renesas,gpio-r8a7743", > > - /* RZ/G1 GPIO is identical to R-Car Gen2. */ > > - .data = &gpio_rcar_info_gen2, > > - }, { > > - .compatible = "renesas,gpio-r8a7790", > > - .data = &gpio_rcar_info_gen2, > > - }, { > > - .compatible = "renesas,gpio-r8a7791", > > - .data = &gpio_rcar_info_gen2, > > - }, { > > - .compatible = "renesas,gpio-r8a7792", > > - .data = &gpio_rcar_info_gen2, > > - }, { > > - .compatible = "renesas,gpio-r8a7793", > > - .data = &gpio_rcar_info_gen2, > > - }, { > > - .compatible = "renesas,gpio-r8a7794", > > - .data = &gpio_rcar_info_gen2, > > - }, { > > - .compatible = "renesas,gpio-r8a7795", > > - /* Gen3 GPIO is identical to Gen2. */ > > - .data = &gpio_rcar_info_gen2, > > - }, { > > - .compatible = "renesas,gpio-r8a7796", > > - /* Gen3 GPIO is identical to Gen2. */ > > - .data = &gpio_rcar_info_gen2, > > - }, { > > .compatible = "renesas,rcar-gen1-gpio", > > .data = &gpio_rcar_info_gen1, > > }, { > > The reason the driver matches on these SoC-specific compatible values is > that originally the family-specific compatible values did not exist, and > the device nodes in the initial DTS files thus did not use them. The > family-specific compatible values were added to the DTS files in v4.15. > However, as this was backported to all v4.14-based R-Car BSP releases > (3.6.0 and later), I think it is safe to apply this. > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds Patch applied, thanks! Bartosz
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c index 0b572dbc4a36..f3b8c4b44cab 100644 --- a/drivers/gpio/gpio-rcar.c +++ b/drivers/gpio/gpio-rcar.c @@ -392,33 +392,6 @@ static const struct gpio_rcar_info gpio_rcar_info_gen2 = { static const struct of_device_id gpio_rcar_of_table[] = { { - .compatible = "renesas,gpio-r8a7743", - /* RZ/G1 GPIO is identical to R-Car Gen2. */ - .data = &gpio_rcar_info_gen2, - }, { - .compatible = "renesas,gpio-r8a7790", - .data = &gpio_rcar_info_gen2, - }, { - .compatible = "renesas,gpio-r8a7791", - .data = &gpio_rcar_info_gen2, - }, { - .compatible = "renesas,gpio-r8a7792", - .data = &gpio_rcar_info_gen2, - }, { - .compatible = "renesas,gpio-r8a7793", - .data = &gpio_rcar_info_gen2, - }, { - .compatible = "renesas,gpio-r8a7794", - .data = &gpio_rcar_info_gen2, - }, { - .compatible = "renesas,gpio-r8a7795", - /* Gen3 GPIO is identical to Gen2. */ - .data = &gpio_rcar_info_gen2, - }, { - .compatible = "renesas,gpio-r8a7796", - /* Gen3 GPIO is identical to Gen2. */ - .data = &gpio_rcar_info_gen2, - }, { .compatible = "renesas,rcar-gen1-gpio", .data = &gpio_rcar_info_gen1, }, {
The mandatory compatible values 'renesas,rcar-gen{1,2,3}-gpio' have been already added to all the respective R-Car Gen{1,2,3} SoC DTSI files, remove the redundant device specific values from the driver. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> --- drivers/gpio/gpio-rcar.c | 27 --------------------------- 1 file changed, 27 deletions(-)