diff mbox series

[v5] pinctrl: qcom: sc8180x: add ACPI probe support

Message ID 20210311024102.15450-1-shawn.guo@linaro.org
State Superseded
Headers show
Series [v5] pinctrl: qcom: sc8180x: add ACPI probe support | expand

Commit Message

Shawn Guo March 11, 2021, 2:41 a.m. UTC
It adds ACPI probe support for pinctrl-sc8180x driver.  We have one
problem with ACPI table, i.e. GIO0 (TLMM) block has one single memory
resource to cover 3 tiles defined by SC8180X.  To follow the hardware
layout of 3 tiles which is already supported DT probe, it adds one
function to replace the original single memory resource with 3 named
ones for tiles.  With that, We can map memory for ACPI in the same way
as DT.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

---
Changes for v5:
- Keep .ngpios number as 190 to match SoC spec.
- Add comments for sc8180x_pinctrl_add_tile_resources().
- Drop redundant error message.

Changes for v4:
- Add sc8180x_pinctrl_add_tile_resources() to massage memory resource
  for ACPI probe.

Changes for v3:
- Remove the use of tiles completely.
- Drop unneed include of acpi.h.

Changes for v2:
- Pass soc_data pointer via .driver_data.
- Drop use of CONFIG_ACPI and ACPI_PTR().
- Add comment for sc8180x_acpi_reserved_gpios[] terminator.

 drivers/pinctrl/qcom/Kconfig           |   2 +-
 drivers/pinctrl/qcom/pinctrl-sc8180x.c | 123 ++++++++++++++++++++++++-
 2 files changed, 122 insertions(+), 3 deletions(-)

-- 
2.17.1

Comments

Bjorn Andersson March 11, 2021, 4:06 a.m. UTC | #1
On Wed 10 Mar 18:41 PST 2021, Shawn Guo wrote:

> It adds ACPI probe support for pinctrl-sc8180x driver.  We have one

> problem with ACPI table, i.e. GIO0 (TLMM) block has one single memory

> resource to cover 3 tiles defined by SC8180X.  To follow the hardware

> layout of 3 tiles which is already supported DT probe, it adds one

> function to replace the original single memory resource with 3 named

> ones for tiles.  With that, We can map memory for ACPI in the same way

> as DT.

> 


Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>


Regards,
Bjorn

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> ---

> Changes for v5:

> - Keep .ngpios number as 190 to match SoC spec.

> - Add comments for sc8180x_pinctrl_add_tile_resources().

> - Drop redundant error message.

> 

> Changes for v4:

> - Add sc8180x_pinctrl_add_tile_resources() to massage memory resource

>   for ACPI probe.

> 

> Changes for v3:

> - Remove the use of tiles completely.

> - Drop unneed include of acpi.h.

> 

> Changes for v2:

> - Pass soc_data pointer via .driver_data.

> - Drop use of CONFIG_ACPI and ACPI_PTR().

> - Add comment for sc8180x_acpi_reserved_gpios[] terminator.

> 

>  drivers/pinctrl/qcom/Kconfig           |   2 +-

>  drivers/pinctrl/qcom/pinctrl-sc8180x.c | 123 ++++++++++++++++++++++++-

>  2 files changed, 122 insertions(+), 3 deletions(-)

> 

> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig

> index 6853a896c476..9f0218c4f9b3 100644

> --- a/drivers/pinctrl/qcom/Kconfig

> +++ b/drivers/pinctrl/qcom/Kconfig

> @@ -222,7 +222,7 @@ config PINCTRL_SC7280

>  

>  config PINCTRL_SC8180X

>  	tristate "Qualcomm Technologies Inc SC8180x pin controller driver"

> -	depends on GPIOLIB && OF

> +	depends on GPIOLIB && (OF || ACPI)

>  	select PINCTRL_MSM

>  	help

>  	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the

> diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c

> index b765bf667574..0d9654b4ab60 100644

> --- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c

> +++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c

> @@ -23,6 +23,21 @@ enum {

>  	WEST

>  };

>  

> +/*

> + * ACPI DSDT has one single memory resource for TLMM.  The offsets below are

> + * used to locate different tiles for ACPI probe.

> + */

> +struct tile_info {

> +	u32 offset;

> +	u32 size;

> +};

> +

> +static const struct tile_info sc8180x_tile_info[] = {

> +	{ 0x00d00000, 0x00300000, },

> +	{ 0x00500000, 0x00700000, },

> +	{ 0x00100000, 0x00300000, },

> +};

> +

>  #define FUNCTION(fname)					\

>  	[msm_mux_##fname] = {				\

>  		.name = #fname,				\

> @@ -1557,6 +1572,13 @@ static const struct msm_pingroup sc8180x_groups[] = {

>  	[193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0),

>  };

>  

> +static const int sc8180x_acpi_reserved_gpios[] = {

> +	0, 1, 2, 3,

> +	47, 48, 49, 50,

> +	126, 127, 128, 129,

> +	-1 /* terminator */

> +};

> +

>  static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {

>  	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },

>  	{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },

> @@ -1588,13 +1610,109 @@ static struct msm_pinctrl_soc_data sc8180x_pinctrl = {

>  	.nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map),

>  };

>  

> +static const struct msm_pinctrl_soc_data sc8180x_acpi_pinctrl = {

> +	.tiles = sc8180x_tiles,

> +	.ntiles = ARRAY_SIZE(sc8180x_tiles),

> +	.pins = sc8180x_pins,

> +	.npins = ARRAY_SIZE(sc8180x_pins),

> +	.groups = sc8180x_groups,

> +	.ngroups = ARRAY_SIZE(sc8180x_groups),

> +	.reserved_gpios = sc8180x_acpi_reserved_gpios,

> +	.ngpios = 190,

> +};

> +

> +/*

> + * ACPI DSDT has one single memory resource for TLMM, which voilates the

> + * hardware layout of 3 sepearte tiles.  Let's split the memory resource into

> + * 3 named ones, so that msm_pinctrl_probe() can map memory for ACPI in the

> + * same way as for DT probe.

> + */

> +static int sc8180x_pinctrl_add_tile_resources(struct platform_device *pdev)

> +{

> +	int nres_num = pdev->num_resources + ARRAY_SIZE(sc8180x_tiles) - 1;

> +	struct resource *mres, *nres, *res;

> +	int i, ret;

> +

> +	/*

> +	 * DT already has tiles defined properly, so nothing needs to be done

> +	 * for DT probe.

> +	 */

> +	if (pdev->dev.of_node)

> +		return 0;

> +

> +	/* Allocate for new resources */

> +	nres = devm_kzalloc(&pdev->dev, sizeof(*nres) * nres_num, GFP_KERNEL);

> +	if (!nres)

> +		return -ENOMEM;

> +

> +	res = nres;

> +

> +	for (i = 0; i < pdev->num_resources; i++) {

> +		struct resource *r = &pdev->resource[i];

> +

> +		/* Save memory resource and copy others */

> +		if (resource_type(r) == IORESOURCE_MEM)

> +			mres = r;

> +		else

> +			*res++ = *r;

> +	}

> +

> +	/* Append tile memory resources */

> +	for (i = 0; i < ARRAY_SIZE(sc8180x_tiles); i++, res++) {

> +		const struct tile_info *info = &sc8180x_tile_info[i];

> +

> +		res->start = mres->start + info->offset;

> +		res->end = mres->start + info->offset + info->size - 1;

> +		res->flags = mres->flags;

> +		res->name = sc8180x_tiles[i];

> +

> +		/* Add new MEM to resource tree */

> +		insert_resource(mres->parent, res);

> +	}

> +

> +	/* Remove old MEM from resource tree */

> +	remove_resource(mres);

> +

> +	/* Free old resources and install new ones */

> +	ret = platform_device_add_resources(pdev, nres, nres_num);

> +	if (ret) {

> +		dev_err(&pdev->dev, "failed to add new resources: %d\n", ret);

> +		return ret;

> +	}

> +

> +	return 0;

> +}

> +

>  static int sc8180x_pinctrl_probe(struct platform_device *pdev)

>  {

> -	return msm_pinctrl_probe(pdev, &sc8180x_pinctrl);

> +	const struct msm_pinctrl_soc_data *soc_data;

> +	int ret;

> +

> +	soc_data = device_get_match_data(&pdev->dev);

> +	if (!soc_data)

> +		return -EINVAL;

> +

> +	ret = sc8180x_pinctrl_add_tile_resources(pdev);

> +	if (ret)

> +		return ret;

> +

> +	return msm_pinctrl_probe(pdev, soc_data);

>  }

>  

> +static const struct acpi_device_id sc8180x_pinctrl_acpi_match[] = {

> +	{

> +		.id = "QCOM040D",

> +		.driver_data = (kernel_ulong_t) &sc8180x_acpi_pinctrl,

> +	},

> +	{ }

> +};

> +MODULE_DEVICE_TABLE(acpi, sc8180x_pinctrl_acpi_match);

> +

>  static const struct of_device_id sc8180x_pinctrl_of_match[] = {

> -	{ .compatible = "qcom,sc8180x-tlmm", },

> +	{

> +		.compatible = "qcom,sc8180x-tlmm",

> +		.data = &sc8180x_pinctrl,

> +	},

>  	{ },

>  };

>  MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match);

> @@ -1603,6 +1721,7 @@ static struct platform_driver sc8180x_pinctrl_driver = {

>  	.driver = {

>  		.name = "sc8180x-pinctrl",

>  		.of_match_table = sc8180x_pinctrl_of_match,

> +		.acpi_match_table = sc8180x_pinctrl_acpi_match,

>  	},

>  	.probe = sc8180x_pinctrl_probe,

>  	.remove = msm_pinctrl_remove,

> -- 

> 2.17.1

>
Andy Shevchenko March 11, 2021, 11:01 a.m. UTC | #2
On Thu, Mar 11, 2021 at 10:41:02AM +0800, Shawn Guo wrote:
> It adds ACPI probe support for pinctrl-sc8180x driver.  We have one

> problem with ACPI table, i.e. GIO0 (TLMM) block has one single memory

> resource to cover 3 tiles defined by SC8180X.  To follow the hardware

> layout of 3 tiles which is already supported DT probe, it adds one

> function to replace the original single memory resource with 3 named

> ones for tiles.  With that, We can map memory for ACPI in the same way

> as DT.


FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>


(See some minor comments below)

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> ---

> Changes for v5:

> - Keep .ngpios number as 190 to match SoC spec.

> - Add comments for sc8180x_pinctrl_add_tile_resources().

> - Drop redundant error message.

> 

> Changes for v4:

> - Add sc8180x_pinctrl_add_tile_resources() to massage memory resource

>   for ACPI probe.

> 

> Changes for v3:

> - Remove the use of tiles completely.

> - Drop unneed include of acpi.h.

> 

> Changes for v2:

> - Pass soc_data pointer via .driver_data.

> - Drop use of CONFIG_ACPI and ACPI_PTR().

> - Add comment for sc8180x_acpi_reserved_gpios[] terminator.

> 

>  drivers/pinctrl/qcom/Kconfig           |   2 +-

>  drivers/pinctrl/qcom/pinctrl-sc8180x.c | 123 ++++++++++++++++++++++++-

>  2 files changed, 122 insertions(+), 3 deletions(-)

> 

> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig

> index 6853a896c476..9f0218c4f9b3 100644

> --- a/drivers/pinctrl/qcom/Kconfig

> +++ b/drivers/pinctrl/qcom/Kconfig

> @@ -222,7 +222,7 @@ config PINCTRL_SC7280

>  

>  config PINCTRL_SC8180X

>  	tristate "Qualcomm Technologies Inc SC8180x pin controller driver"

> -	depends on GPIOLIB && OF

> +	depends on GPIOLIB && (OF || ACPI)

>  	select PINCTRL_MSM

>  	help

>  	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the

> diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c

> index b765bf667574..0d9654b4ab60 100644

> --- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c

> +++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c

> @@ -23,6 +23,21 @@ enum {

>  	WEST

>  };

>  

> +/*

> + * ACPI DSDT has one single memory resource for TLMM.  The offsets below are


One space is enough.

> + * used to locate different tiles for ACPI probe.

> + */

> +struct tile_info {

> +	u32 offset;

> +	u32 size;

> +};

> +

> +static const struct tile_info sc8180x_tile_info[] = {

> +	{ 0x00d00000, 0x00300000, },

> +	{ 0x00500000, 0x00700000, },

> +	{ 0x00100000, 0x00300000, },

> +};

> +

>  #define FUNCTION(fname)					\

>  	[msm_mux_##fname] = {				\

>  		.name = #fname,				\

> @@ -1557,6 +1572,13 @@ static const struct msm_pingroup sc8180x_groups[] = {

>  	[193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0),

>  };

>  

> +static const int sc8180x_acpi_reserved_gpios[] = {

> +	0, 1, 2, 3,

> +	47, 48, 49, 50,

> +	126, 127, 128, 129,

> +	-1 /* terminator */

> +};

> +

>  static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {

>  	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },

>  	{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },

> @@ -1588,13 +1610,109 @@ static struct msm_pinctrl_soc_data sc8180x_pinctrl = {

>  	.nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map),

>  };

>  

> +static const struct msm_pinctrl_soc_data sc8180x_acpi_pinctrl = {

> +	.tiles = sc8180x_tiles,

> +	.ntiles = ARRAY_SIZE(sc8180x_tiles),

> +	.pins = sc8180x_pins,

> +	.npins = ARRAY_SIZE(sc8180x_pins),

> +	.groups = sc8180x_groups,

> +	.ngroups = ARRAY_SIZE(sc8180x_groups),

> +	.reserved_gpios = sc8180x_acpi_reserved_gpios,

> +	.ngpios = 190,

> +};

> +

> +/*

> + * ACPI DSDT has one single memory resource for TLMM, which voilates the

> + * hardware layout of 3 sepearte tiles.  Let's split the memory resource into

> + * 3 named ones, so that msm_pinctrl_probe() can map memory for ACPI in the

> + * same way as for DT probe.

> + */

> +static int sc8180x_pinctrl_add_tile_resources(struct platform_device *pdev)

> +{

> +	int nres_num = pdev->num_resources + ARRAY_SIZE(sc8180x_tiles) - 1;

> +	struct resource *mres, *nres, *res;

> +	int i, ret;

> +

> +	/*

> +	 * DT already has tiles defined properly, so nothing needs to be done

> +	 * for DT probe.

> +	 */

> +	if (pdev->dev.of_node)

> +		return 0;

> +

> +	/* Allocate for new resources */

> +	nres = devm_kzalloc(&pdev->dev, sizeof(*nres) * nres_num, GFP_KERNEL);


devm_kcalloc()

> +	if (!nres)

> +		return -ENOMEM;

> +

> +	res = nres;

> +

> +	for (i = 0; i < pdev->num_resources; i++) {

> +		struct resource *r = &pdev->resource[i];

> +

> +		/* Save memory resource and copy others */

> +		if (resource_type(r) == IORESOURCE_MEM)

> +			mres = r;

> +		else

> +			*res++ = *r;

> +	}

> +

> +	/* Append tile memory resources */

> +	for (i = 0; i < ARRAY_SIZE(sc8180x_tiles); i++, res++) {

> +		const struct tile_info *info = &sc8180x_tile_info[i];


> +		res->start = mres->start + info->offset;

> +		res->end = mres->start + info->offset + info->size - 1;

> +		res->flags = mres->flags;

> +		res->name = sc8180x_tiles[i];

> +		/* Add new MEM to resource tree */

> +		insert_resource(mres->parent, res);

> +	}

> +

> +	/* Remove old MEM from resource tree */

> +	remove_resource(mres);

> +

> +	/* Free old resources and install new ones */

> +	ret = platform_device_add_resources(pdev, nres, nres_num);


> +	if (ret) {

> +		dev_err(&pdev->dev, "failed to add new resources: %d\n", ret);

> +		return ret;

> +	}

> +

> +	return 0;


if (ret)
	dev_err(...);
return ret;

?

> +}

> +

>  static int sc8180x_pinctrl_probe(struct platform_device *pdev)

>  {

> -	return msm_pinctrl_probe(pdev, &sc8180x_pinctrl);

> +	const struct msm_pinctrl_soc_data *soc_data;

> +	int ret;

> +

> +	soc_data = device_get_match_data(&pdev->dev);

> +	if (!soc_data)

> +		return -EINVAL;

> +

> +	ret = sc8180x_pinctrl_add_tile_resources(pdev);

> +	if (ret)

> +		return ret;

> +

> +	return msm_pinctrl_probe(pdev, soc_data);

>  }

>  

> +static const struct acpi_device_id sc8180x_pinctrl_acpi_match[] = {

> +	{

> +		.id = "QCOM040D",

> +		.driver_data = (kernel_ulong_t) &sc8180x_acpi_pinctrl,

> +	},

> +	{ }

> +};

> +MODULE_DEVICE_TABLE(acpi, sc8180x_pinctrl_acpi_match);

> +

>  static const struct of_device_id sc8180x_pinctrl_of_match[] = {

> -	{ .compatible = "qcom,sc8180x-tlmm", },

> +	{

> +		.compatible = "qcom,sc8180x-tlmm",

> +		.data = &sc8180x_pinctrl,

> +	},

>  	{ },

>  };

>  MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match);

> @@ -1603,6 +1721,7 @@ static struct platform_driver sc8180x_pinctrl_driver = {

>  	.driver = {

>  		.name = "sc8180x-pinctrl",

>  		.of_match_table = sc8180x_pinctrl_of_match,

> +		.acpi_match_table = sc8180x_pinctrl_acpi_match,

>  	},

>  	.probe = sc8180x_pinctrl_probe,

>  	.remove = msm_pinctrl_remove,

> -- 

> 2.17.1

> 


-- 
With Best Regards,
Andy Shevchenko
Linus Walleij March 15, 2021, 4:32 p.m. UTC | #3
On Thu, Mar 11, 2021 at 3:41 AM Shawn Guo <shawn.guo@linaro.org> wrote:

> It adds ACPI probe support for pinctrl-sc8180x driver.  We have one
> problem with ACPI table, i.e. GIO0 (TLMM) block has one single memory
> resource to cover 3 tiles defined by SC8180X.  To follow the hardware
> layout of 3 tiles which is already supported DT probe, it adds one
> function to replace the original single memory resource with 3 named
> ones for tiles.  With that, We can map memory for ACPI in the same way
> as DT.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> Changes for v5:
> - Keep .ngpios number as 190 to match SoC spec.
> - Add comments for sc8180x_pinctrl_add_tile_resources().
> - Drop redundant error message.

This v5 version applied!
Thanks for your perseverance and excellent work as always Shawn!

Special thanks to Andy for helping out in getting all ACPI details right!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 6853a896c476..9f0218c4f9b3 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -222,7 +222,7 @@  config PINCTRL_SC7280
 
 config PINCTRL_SC8180X
 	tristate "Qualcomm Technologies Inc SC8180x pin controller driver"
-	depends on GPIOLIB && OF
+	depends on GPIOLIB && (OF || ACPI)
 	select PINCTRL_MSM
 	help
 	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
index b765bf667574..0d9654b4ab60 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
@@ -23,6 +23,21 @@  enum {
 	WEST
 };
 
+/*
+ * ACPI DSDT has one single memory resource for TLMM.  The offsets below are
+ * used to locate different tiles for ACPI probe.
+ */
+struct tile_info {
+	u32 offset;
+	u32 size;
+};
+
+static const struct tile_info sc8180x_tile_info[] = {
+	{ 0x00d00000, 0x00300000, },
+	{ 0x00500000, 0x00700000, },
+	{ 0x00100000, 0x00300000, },
+};
+
 #define FUNCTION(fname)					\
 	[msm_mux_##fname] = {				\
 		.name = #fname,				\
@@ -1557,6 +1572,13 @@  static const struct msm_pingroup sc8180x_groups[] = {
 	[193] = SDC_QDSD_PINGROUP(sdc2_data, 0x4b2000, 9, 0),
 };
 
+static const int sc8180x_acpi_reserved_gpios[] = {
+	0, 1, 2, 3,
+	47, 48, 49, 50,
+	126, 127, 128, 129,
+	-1 /* terminator */
+};
+
 static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
 	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
 	{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
@@ -1588,13 +1610,109 @@  static struct msm_pinctrl_soc_data sc8180x_pinctrl = {
 	.nwakeirq_map = ARRAY_SIZE(sc8180x_pdc_map),
 };
 
+static const struct msm_pinctrl_soc_data sc8180x_acpi_pinctrl = {
+	.tiles = sc8180x_tiles,
+	.ntiles = ARRAY_SIZE(sc8180x_tiles),
+	.pins = sc8180x_pins,
+	.npins = ARRAY_SIZE(sc8180x_pins),
+	.groups = sc8180x_groups,
+	.ngroups = ARRAY_SIZE(sc8180x_groups),
+	.reserved_gpios = sc8180x_acpi_reserved_gpios,
+	.ngpios = 190,
+};
+
+/*
+ * ACPI DSDT has one single memory resource for TLMM, which voilates the
+ * hardware layout of 3 sepearte tiles.  Let's split the memory resource into
+ * 3 named ones, so that msm_pinctrl_probe() can map memory for ACPI in the
+ * same way as for DT probe.
+ */
+static int sc8180x_pinctrl_add_tile_resources(struct platform_device *pdev)
+{
+	int nres_num = pdev->num_resources + ARRAY_SIZE(sc8180x_tiles) - 1;
+	struct resource *mres, *nres, *res;
+	int i, ret;
+
+	/*
+	 * DT already has tiles defined properly, so nothing needs to be done
+	 * for DT probe.
+	 */
+	if (pdev->dev.of_node)
+		return 0;
+
+	/* Allocate for new resources */
+	nres = devm_kzalloc(&pdev->dev, sizeof(*nres) * nres_num, GFP_KERNEL);
+	if (!nres)
+		return -ENOMEM;
+
+	res = nres;
+
+	for (i = 0; i < pdev->num_resources; i++) {
+		struct resource *r = &pdev->resource[i];
+
+		/* Save memory resource and copy others */
+		if (resource_type(r) == IORESOURCE_MEM)
+			mres = r;
+		else
+			*res++ = *r;
+	}
+
+	/* Append tile memory resources */
+	for (i = 0; i < ARRAY_SIZE(sc8180x_tiles); i++, res++) {
+		const struct tile_info *info = &sc8180x_tile_info[i];
+
+		res->start = mres->start + info->offset;
+		res->end = mres->start + info->offset + info->size - 1;
+		res->flags = mres->flags;
+		res->name = sc8180x_tiles[i];
+
+		/* Add new MEM to resource tree */
+		insert_resource(mres->parent, res);
+	}
+
+	/* Remove old MEM from resource tree */
+	remove_resource(mres);
+
+	/* Free old resources and install new ones */
+	ret = platform_device_add_resources(pdev, nres, nres_num);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add new resources: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int sc8180x_pinctrl_probe(struct platform_device *pdev)
 {
-	return msm_pinctrl_probe(pdev, &sc8180x_pinctrl);
+	const struct msm_pinctrl_soc_data *soc_data;
+	int ret;
+
+	soc_data = device_get_match_data(&pdev->dev);
+	if (!soc_data)
+		return -EINVAL;
+
+	ret = sc8180x_pinctrl_add_tile_resources(pdev);
+	if (ret)
+		return ret;
+
+	return msm_pinctrl_probe(pdev, soc_data);
 }
 
+static const struct acpi_device_id sc8180x_pinctrl_acpi_match[] = {
+	{
+		.id = "QCOM040D",
+		.driver_data = (kernel_ulong_t) &sc8180x_acpi_pinctrl,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, sc8180x_pinctrl_acpi_match);
+
 static const struct of_device_id sc8180x_pinctrl_of_match[] = {
-	{ .compatible = "qcom,sc8180x-tlmm", },
+	{
+		.compatible = "qcom,sc8180x-tlmm",
+		.data = &sc8180x_pinctrl,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sc8180x_pinctrl_of_match);
@@ -1603,6 +1721,7 @@  static struct platform_driver sc8180x_pinctrl_driver = {
 	.driver = {
 		.name = "sc8180x-pinctrl",
 		.of_match_table = sc8180x_pinctrl_of_match,
+		.acpi_match_table = sc8180x_pinctrl_acpi_match,
 	},
 	.probe = sc8180x_pinctrl_probe,
 	.remove = msm_pinctrl_remove,