diff mbox series

[v3,1/7] ASoC: dt-bindings: wcd938x: add bindings for wcd938x

Message ID 20210319092919.21218-2-srinivas.kandagatla@linaro.org
State New
Headers show
Series ASoC: codecs: add wcd938x support | expand

Commit Message

Srinivas Kandagatla March 19, 2021, 9:29 a.m. UTC
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire device RX and
TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
7 x TX diff inputs, 8 DMICs, MBHC.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../bindings/sound/qcom,wcd938x.yaml          | 165 ++++++++++++++++++
 1 file changed, 165 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml

Comments

Rob Herring (Arm) March 26, 2021, 1:52 a.m. UTC | #1
On Fri, Mar 19, 2021 at 09:29:13AM +0000, Srinivas Kandagatla wrote:
> Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
> connected over SoundWire. This device has two SoundWire device RX and
> TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
> 7 x TX diff inputs, 8 DMICs, MBHC.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>  .../bindings/sound/qcom,wcd938x.yaml          | 165 ++++++++++++++++++
>  1 file changed, 165 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
> new file mode 100644
> index 000000000000..fe47e483d4b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
> @@ -0,0 +1,165 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +
> +description: |
> +  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
> +  It has RX and TX Soundwire slave devices.
> +
> +properties:
> +  compatible:
> +    const: sdw20217010d00
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: GPIO spec for reset line to use
> +    maxItems: 1
> +
> +  direction:

Needs a description and vendor prefix.

> +    oneOf:
> +      - const: rx
> +      - const: tx

Better expressed as an 'enum'

> +
> +  vdd-buck-supply:
> +    description: A reference to the 1.8V buck supply
> +
> +  vdd-rxtx-supply:
> +    description: A reference to the 1.8V rx supply
> +
> +  vdd-io-supply:
> +    description: A reference to the 1.8V I/O supply
> +
> +  qcom,micbias1-microvolt:
> +    description: micbias1 voltage
> +    minimum: 1800000
> +    maximum: 2850000
> +
> +  qcom,micbias2-microvolt:
> +    description: micbias2 voltage
> +    minimum: 1800000
> +    maximum: 2850000
> +
> +  qcom,micbias3-microvolt:
> +    description: micbias3 voltage
> +    minimum: 1800000
> +    maximum: 2850000
> +
> +  qcom,micbias4-microvolt:
> +    description: micbias4 voltage
> +    minimum: 1800000
> +    maximum: 2850000
> +
> +  qcom,mbhc-hphl-switch:
> +    description: Indicates that HPHL switch type is normally closed
> +    type: boolean
> +
> +  qcom,mbhc-ground-switch:
> +    description: Indicates that Headset Ground switch type is normally closed
> +    type: boolean
> +
> +  qcom,mbhc-button0-vthreshold-microvolt:
> +    description: Voltage threshold value headset button0
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,mbhc-button1-vthreshold-microvolt:
> +    description: Voltage threshold value headset button1
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,mbhc-button2-vthreshold-microvolt:
> +    description: Voltage threshold value headset button2
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,mbhc-button3-vthreshold-microvolt:
> +    description: Voltage threshold value headset button3
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,mbhc-button4-vthreshold-microvolt:
> +    description: Voltage threshold value headset button4
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,mbhc-button5-vthreshold-microvolt:
> +    description: Voltage threshold value headset button5
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,mbhc-button6-vthreshold-microvolt:
> +    description: Voltage threshold value headset button6
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,mbhc-button7-vthreshold-microvolt:
> +    description: Voltage threshold value headset button7
> +    minimum: 0
> +    maximum: 500000
> +
> +  qcom,port-mapping:
> +    description: |
> +      Specifies static port mapping between slave and master ports.
> +      In the order of slave port index.
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 4
> +    maxItems: 5
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - qcom,micbias1-microvolt
> +  - qcom,micbias2-microvolt
> +  - qcom,micbias3-microvolt
> +  - qcom,micbias4-microvolt
> +  - qcom,port-mapping
> +  - qcom,mbhc-hphl-switch
> +  - qcom,mbhc-ground-switch
> +  - "#sound-dai-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soundwire@3230000 {
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        reg = <0x03230000 0x2000>;
> +
> +        codec@0,3 {
> +            compatible = "sdw20217010d00";
> +            reg  = <0 3>;
> +            reset-gpios = <&tlmm 32 0>;
> +            direction = "tx";
> +            #sound-dai-cells = <1>;
> +            qcom,micbias1-microvolt = <1800000>;
> +            qcom,micbias2-microvolt = <1800000>;
> +            qcom,micbias3-microvolt = <1800000>;
> +            qcom,micbias4-microvolt = <1800000>;
> +            qcom,mbhc-hphl-switch;
> +            qcom,mbhc-ground-switch;
> +            qcom,mbhc-button0-vthreshold-microvolt = <75000>;
> +            qcom,mbhc-button1-vthreshold-microvolt = <150000>;
> +            qcom,mbhc-button2-vthreshold-microvolt = <237000>;
> +            qcom,mbhc-button3-vthreshold-microvolt = <500000>;
> +            qcom,mbhc-button5-vthreshold-microvolt = <500000>;
> +            qcom,mbhc-button6-vthreshold-microvolt = <500000>;
> +            qcom,mbhc-button7-vthreshold-microvolt = <500000>;
> +            qcom,port-mapping = <2 3 4 5>;
> +        };
> +    };
> +
> +...
> -- 
> 2.21.0
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
new file mode 100644
index 000000000000..fe47e483d4b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -0,0 +1,165 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+  It has RX and TX Soundwire slave devices.
+
+properties:
+  compatible:
+    const: sdw20217010d00
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  direction:
+    oneOf:
+      - const: rx
+      - const: tx
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-rxtx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,mbhc-hphl-switch:
+    description: Indicates that HPHL switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-ground-switch:
+    description: Indicates that Headset Ground switch type is normally closed
+    type: boolean
+
+  qcom,mbhc-button0-vthreshold-microvolt:
+    description: Voltage threshold value headset button0
+    minimum: 0
+    maximum: 500000
+
+  qcom,mbhc-button1-vthreshold-microvolt:
+    description: Voltage threshold value headset button1
+    minimum: 0
+    maximum: 500000
+
+  qcom,mbhc-button2-vthreshold-microvolt:
+    description: Voltage threshold value headset button2
+    minimum: 0
+    maximum: 500000
+
+  qcom,mbhc-button3-vthreshold-microvolt:
+    description: Voltage threshold value headset button3
+    minimum: 0
+    maximum: 500000
+
+  qcom,mbhc-button4-vthreshold-microvolt:
+    description: Voltage threshold value headset button4
+    minimum: 0
+    maximum: 500000
+
+  qcom,mbhc-button5-vthreshold-microvolt:
+    description: Voltage threshold value headset button5
+    minimum: 0
+    maximum: 500000
+
+  qcom,mbhc-button6-vthreshold-microvolt:
+    description: Voltage threshold value headset button6
+    minimum: 0
+    maximum: 500000
+
+  qcom,mbhc-button7-vthreshold-microvolt:
+    description: Voltage threshold value headset button7
+    minimum: 0
+    maximum: 500000
+
+  qcom,port-mapping:
+    description: |
+      Specifies static port mapping between slave and master ports.
+      In the order of slave port index.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 5
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - qcom,port-mapping
+  - qcom,mbhc-hphl-switch
+  - qcom,mbhc-ground-switch
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@3230000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x03230000 0x2000>;
+
+        codec@0,3 {
+            compatible = "sdw20217010d00";
+            reg  = <0 3>;
+            reset-gpios = <&tlmm 32 0>;
+            direction = "tx";
+            #sound-dai-cells = <1>;
+            qcom,micbias1-microvolt = <1800000>;
+            qcom,micbias2-microvolt = <1800000>;
+            qcom,micbias3-microvolt = <1800000>;
+            qcom,micbias4-microvolt = <1800000>;
+            qcom,mbhc-hphl-switch;
+            qcom,mbhc-ground-switch;
+            qcom,mbhc-button0-vthreshold-microvolt = <75000>;
+            qcom,mbhc-button1-vthreshold-microvolt = <150000>;
+            qcom,mbhc-button2-vthreshold-microvolt = <237000>;
+            qcom,mbhc-button3-vthreshold-microvolt = <500000>;
+            qcom,mbhc-button5-vthreshold-microvolt = <500000>;
+            qcom,mbhc-button6-vthreshold-microvolt = <500000>;
+            qcom,mbhc-button7-vthreshold-microvolt = <500000>;
+            qcom,port-mapping = <2 3 4 5>;
+        };
+    };
+
+...