diff mbox series

thermal/drivers/netlink: Add the temperature when crossing a trip point

Message ID 20210325193633.19592-1-daniel.lezcano@linaro.org
State Superseded
Headers show
Series thermal/drivers/netlink: Add the temperature when crossing a trip point | expand

Commit Message

Daniel Lezcano March 25, 2021, 7:36 p.m. UTC
The slope of the temperature increase or decrease can be high and when
the temperature crosses the trip point, there could be a significant
difference between the trip temperature and the measured temperatures.

That forces the userspace to read the temperature back right after
receiving a trip violation notification.

In order to be efficient, give the temperature which resulted in the
trip violation.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

---
 drivers/thermal/thermal_core.c    |  6 ++++--
 drivers/thermal/thermal_netlink.c | 11 ++++++-----
 drivers/thermal/thermal_netlink.h |  8 ++++----
 include/uapi/linux/thermal.h      |  2 +-
 4 files changed, 15 insertions(+), 12 deletions(-)

-- 
2.17.1

Comments

Rafael J. Wysocki March 26, 2021, 4:37 p.m. UTC | #1
On Thu, Mar 25, 2021 at 8:38 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>

> The slope of the temperature increase or decrease can be high and when

> the temperature crosses the trip point, there could be a significant

> difference between the trip temperature and the measured temperatures.

>

> That forces the userspace to read the temperature back right after

> receiving a trip violation notification.

>

> In order to be efficient, give the temperature which resulted in the

> trip violation.

>

> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>


Srinivas, what do you think?

> ---

>  drivers/thermal/thermal_core.c    |  6 ++++--

>  drivers/thermal/thermal_netlink.c | 11 ++++++-----

>  drivers/thermal/thermal_netlink.h |  8 ++++----

>  include/uapi/linux/thermal.h      |  2 +-

>  4 files changed, 15 insertions(+), 12 deletions(-)

>

> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c

> index 996c038f83a4..948020ef51b1 100644

> --- a/drivers/thermal/thermal_core.c

> +++ b/drivers/thermal/thermal_core.c

> @@ -430,10 +430,12 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)

>         if (tz->last_temperature != THERMAL_TEMP_INVALID) {

>                 if (tz->last_temperature < trip_temp &&

>                     tz->temperature >= trip_temp)

> -                       thermal_notify_tz_trip_up(tz->id, trip);

> +                       thermal_notify_tz_trip_up(tz->id, trip,

> +                                                 tz->temperature);

>                 if (tz->last_temperature >= trip_temp &&

>                     tz->temperature < (trip_temp - hyst))

> -                       thermal_notify_tz_trip_down(tz->id, trip);

> +                       thermal_notify_tz_trip_down(tz->id, trip,

> +                                                   tz->temperature);

>         }

>

>         if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)

> diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c

> index 1234dbe95895..a16dd4d5d710 100644

> --- a/drivers/thermal/thermal_netlink.c

> +++ b/drivers/thermal/thermal_netlink.c

> @@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param *p)

>  static int thermal_genl_event_tz_trip_up(struct param *p)

>  {

>         if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||

> -           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))

> +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||

> +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))

>                 return -EMSGSIZE;

>

>         return 0;

> @@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)

>         return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);

>  }

>

> -int thermal_notify_tz_trip_down(int tz_id, int trip_id)

> +int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)

>  {

> -       struct param p = { .tz_id = tz_id, .trip_id = trip_id };

> +       struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

>

>         return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);

>  }

>

> -int thermal_notify_tz_trip_up(int tz_id, int trip_id)

> +int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)

>  {

> -       struct param p = { .tz_id = tz_id, .trip_id = trip_id };

> +       struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

>

>         return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);

>  }

> diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h

> index 828d1dddfa98..e554f76291f4 100644

> --- a/drivers/thermal/thermal_netlink.h

> +++ b/drivers/thermal/thermal_netlink.h

> @@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const char *name);

>  int thermal_notify_tz_delete(int tz_id);

>  int thermal_notify_tz_enable(int tz_id);

>  int thermal_notify_tz_disable(int tz_id);

> -int thermal_notify_tz_trip_down(int tz_id, int id);

> -int thermal_notify_tz_trip_up(int tz_id, int id);

> +int thermal_notify_tz_trip_down(int tz_id, int id, int temp);

> +int thermal_notify_tz_trip_up(int tz_id, int id, int temp);

>  int thermal_notify_tz_trip_delete(int tz_id, int id);

>  int thermal_notify_tz_trip_add(int tz_id, int id, int type,

>                                int temp, int hyst);

> @@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int tz_id)

>         return 0;

>  }

>

> -static inline int thermal_notify_tz_trip_down(int tz_id, int id)

> +static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)

>  {

>         return 0;

>  }

>

> -static inline int thermal_notify_tz_trip_up(int tz_id, int id)

> +static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)

>  {

>         return 0;

>  }

> diff --git a/include/uapi/linux/thermal.h b/include/uapi/linux/thermal.h

> index c105054cbb57..bf5d9c8ef16f 100644

> --- a/include/uapi/linux/thermal.h

> +++ b/include/uapi/linux/thermal.h

> @@ -18,7 +18,7 @@ enum thermal_trip_type {

>

>  /* Adding event notification support elements */

>  #define THERMAL_GENL_FAMILY_NAME               "thermal"

> -#define THERMAL_GENL_VERSION                   0x01

> +#define THERMAL_GENL_VERSION                   0x02

>  #define THERMAL_GENL_SAMPLING_GROUP_NAME       "sampling"

>  #define THERMAL_GENL_EVENT_GROUP_NAME          "event"

>

> --

> 2.17.1

>
Ram Chandrasekar March 26, 2021, 5:55 p.m. UTC | #2
On 3/25/2021 1:36 PM, Daniel Lezcano wrote:
> The slope of the temperature increase or decrease can be high and when

> the temperature crosses the trip point, there could be a significant

> difference between the trip temperature and the measured temperatures.

> 

> That forces the userspace to read the temperature back right after

> receiving a trip violation notification.

> 

> In order to be efficient, give the temperature which resulted in the

> trip violation.

> 

> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>


To add to Daniel's point, this patch will save a lot of back and forth 
between userspace and kernel, when the temperature is hovering around 
the trip temperature.

Certain sensors are capable of supporting temperatures with more 
granular resolution (like deci C). In those cases after a trip occurs, a 
0.1 C reduction in temperature when userspace reads will make it wait 
for some more time before taking an action.

It is not just a delay in action, but more trip notifications before 
userspace reads the temperature above trip to take an action.

I have seen this back and forth in Snapdragon chipsets.

This patch helps userspace to see the same temperature as thermal 
framework and temperature violations can be handled faster and more 
efficiently.

> ---

>   drivers/thermal/thermal_core.c    |  6 ++++--

>   drivers/thermal/thermal_netlink.c | 11 ++++++-----

>   drivers/thermal/thermal_netlink.h |  8 ++++----

>   include/uapi/linux/thermal.h      |  2 +-

>   4 files changed, 15 insertions(+), 12 deletions(-)

> 

> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c

> index 996c038f83a4..948020ef51b1 100644

> --- a/drivers/thermal/thermal_core.c

> +++ b/drivers/thermal/thermal_core.c

> @@ -430,10 +430,12 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)

>   	if (tz->last_temperature != THERMAL_TEMP_INVALID) {

>   		if (tz->last_temperature < trip_temp &&

>   		    tz->temperature >= trip_temp)

> -			thermal_notify_tz_trip_up(tz->id, trip);

> +			thermal_notify_tz_trip_up(tz->id, trip,

> +						  tz->temperature);

>   		if (tz->last_temperature >= trip_temp &&

>   		    tz->temperature < (trip_temp - hyst))

> -			thermal_notify_tz_trip_down(tz->id, trip);

> +			thermal_notify_tz_trip_down(tz->id, trip,

> +						    tz->temperature);

>   	}

>   

>   	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)

> diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c

> index 1234dbe95895..a16dd4d5d710 100644

> --- a/drivers/thermal/thermal_netlink.c

> +++ b/drivers/thermal/thermal_netlink.c

> @@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param *p)

>   static int thermal_genl_event_tz_trip_up(struct param *p)

>   {

>   	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||

> -	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))

> +	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||

> +	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))

>   		return -EMSGSIZE;

>   

>   	return 0;

> @@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)

>   	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);

>   }

>   

> -int thermal_notify_tz_trip_down(int tz_id, int trip_id)

> +int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)

>   {

> -	struct param p = { .tz_id = tz_id, .trip_id = trip_id };

> +	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

>   

>   	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);

>   }

>   

> -int thermal_notify_tz_trip_up(int tz_id, int trip_id)

> +int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)

>   {

> -	struct param p = { .tz_id = tz_id, .trip_id = trip_id };

> +	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };

>   

>   	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);

>   }

> diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h

> index 828d1dddfa98..e554f76291f4 100644

> --- a/drivers/thermal/thermal_netlink.h

> +++ b/drivers/thermal/thermal_netlink.h

> @@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const char *name);

>   int thermal_notify_tz_delete(int tz_id);

>   int thermal_notify_tz_enable(int tz_id);

>   int thermal_notify_tz_disable(int tz_id);

> -int thermal_notify_tz_trip_down(int tz_id, int id);

> -int thermal_notify_tz_trip_up(int tz_id, int id);

> +int thermal_notify_tz_trip_down(int tz_id, int id, int temp);

> +int thermal_notify_tz_trip_up(int tz_id, int id, int temp);

>   int thermal_notify_tz_trip_delete(int tz_id, int id);

>   int thermal_notify_tz_trip_add(int tz_id, int id, int type,

>   			       int temp, int hyst);

> @@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int tz_id)

>   	return 0;

>   }

>   

> -static inline int thermal_notify_tz_trip_down(int tz_id, int id)

> +static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)

>   {

>   	return 0;

>   }

>   

> -static inline int thermal_notify_tz_trip_up(int tz_id, int id)

> +static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)

>   {

>   	return 0;

>   }

> diff --git a/include/uapi/linux/thermal.h b/include/uapi/linux/thermal.h

> index c105054cbb57..bf5d9c8ef16f 100644

> --- a/include/uapi/linux/thermal.h

> +++ b/include/uapi/linux/thermal.h

> @@ -18,7 +18,7 @@ enum thermal_trip_type {

>   

>   /* Adding event notification support elements */

>   #define THERMAL_GENL_FAMILY_NAME		"thermal"

> -#define THERMAL_GENL_VERSION			0x01

> +#define THERMAL_GENL_VERSION			0x02

>   #define THERMAL_GENL_SAMPLING_GROUP_NAME	"sampling"

>   #define THERMAL_GENL_EVENT_GROUP_NAME		"event"

>   

>
Srinivas Pandruvada March 27, 2021, 5:46 p.m. UTC | #3
On Fri, 2021-03-26 at 17:37 +0100, Rafael J. Wysocki wrote:
> On Thu, Mar 25, 2021 at 8:38 PM Daniel Lezcano

> <daniel.lezcano@linaro.org> wrote:

> > The slope of the temperature increase or decrease can be high and

> > when

> > the temperature crosses the trip point, there could be a

> > significant

> > difference between the trip temperature and the measured

> > temperatures.

> > 

> > That forces the userspace to read the temperature back right after

> > receiving a trip violation notification.

> > 

> > In order to be efficient, give the temperature which resulted in

> > the

> > trip violation.

> > 

> > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> 

> Srinivas, what do you think?


- IMO netlink message should also be treated as we treat other ABIs. So
add only when this is a must. Although here GENL version is incremented
, users are not that careful. At least on x86, we know users created
their own applications.


- Here the concern is temperature is changing so fast then netlink +
user space processing latency is enough to change further to read
temperature again. Atleast we assume that and read temperature again.
So not sure that this is the right approach to add another field for
the temperature.


Thanks,
Srinivas



> 

> > ---

> >  drivers/thermal/thermal_core.c    |  6 ++++--

> >  drivers/thermal/thermal_netlink.c | 11 ++++++-----

> >  drivers/thermal/thermal_netlink.h |  8 ++++----

> >  include/uapi/linux/thermal.h      |  2 +-

> >  4 files changed, 15 insertions(+), 12 deletions(-)

> > 

> > diff --git a/drivers/thermal/thermal_core.c

> > b/drivers/thermal/thermal_core.c

> > index 996c038f83a4..948020ef51b1 100644

> > --- a/drivers/thermal/thermal_core.c

> > +++ b/drivers/thermal/thermal_core.c

> > @@ -430,10 +430,12 @@ static void handle_thermal_trip(struct

> > thermal_zone_device *tz, int trip)

> >         if (tz->last_temperature != THERMAL_TEMP_INVALID) {

> >                 if (tz->last_temperature < trip_temp &&

> >                     tz->temperature >= trip_temp)

> > -                       thermal_notify_tz_trip_up(tz->id, trip);

> > +                       thermal_notify_tz_trip_up(tz->id, trip,

> > +                                                 tz->temperature);

> >                 if (tz->last_temperature >= trip_temp &&

> >                     tz->temperature < (trip_temp - hyst))

> > -                       thermal_notify_tz_trip_down(tz->id, trip);

> > +                       thermal_notify_tz_trip_down(tz->id, trip,

> > +                                                   tz-

> > >temperature);

> >         }

> > 

> >         if (type == THERMAL_TRIP_CRITICAL || type ==

> > THERMAL_TRIP_HOT)

> > diff --git a/drivers/thermal/thermal_netlink.c

> > b/drivers/thermal/thermal_netlink.c

> > index 1234dbe95895..a16dd4d5d710 100644

> > --- a/drivers/thermal/thermal_netlink.c

> > +++ b/drivers/thermal/thermal_netlink.c

> > @@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param

> > *p)

> >  static int thermal_genl_event_tz_trip_up(struct param *p)

> >  {

> >         if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id)

> > ||

> > -           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p-

> > >trip_id))

> > +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p-

> > >trip_id) ||

> > +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p-

> > >temp))

> >                 return -EMSGSIZE;

> > 

> >         return 0;

> > @@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)

> >         return

> > thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);

> >  }

> > 

> > -int thermal_notify_tz_trip_down(int tz_id, int trip_id)

> > +int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)

> >  {

> > -       struct param p = { .tz_id = tz_id, .trip_id = trip_id };

> > +       struct param p = { .tz_id = tz_id, .trip_id = trip_id,

> > .temp = temp };

> > 

> >         return

> > thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);

> >  }

> > 

> > -int thermal_notify_tz_trip_up(int tz_id, int trip_id)

> > +int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)

> >  {

> > -       struct param p = { .tz_id = tz_id, .trip_id = trip_id };

> > +       struct param p = { .tz_id = tz_id, .trip_id = trip_id,

> > .temp = temp };

> > 

> >         return

> > thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);

> >  }

> > diff --git a/drivers/thermal/thermal_netlink.h

> > b/drivers/thermal/thermal_netlink.h

> > index 828d1dddfa98..e554f76291f4 100644

> > --- a/drivers/thermal/thermal_netlink.h

> > +++ b/drivers/thermal/thermal_netlink.h

> > @@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const

> > char *name);

> >  int thermal_notify_tz_delete(int tz_id);

> >  int thermal_notify_tz_enable(int tz_id);

> >  int thermal_notify_tz_disable(int tz_id);

> > -int thermal_notify_tz_trip_down(int tz_id, int id);

> > -int thermal_notify_tz_trip_up(int tz_id, int id);

> > +int thermal_notify_tz_trip_down(int tz_id, int id, int temp);

> > +int thermal_notify_tz_trip_up(int tz_id, int id, int temp);

> >  int thermal_notify_tz_trip_delete(int tz_id, int id);

> >  int thermal_notify_tz_trip_add(int tz_id, int id, int type,

> >                                int temp, int hyst);

> > @@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int

> > tz_id)

> >         return 0;

> >  }

> > 

> > -static inline int thermal_notify_tz_trip_down(int tz_id, int id)

> > +static inline int thermal_notify_tz_trip_down(int tz_id, int id,

> > int temp)

> >  {

> >         return 0;

> >  }

> > 

> > -static inline int thermal_notify_tz_trip_up(int tz_id, int id)

> > +static inline int thermal_notify_tz_trip_up(int tz_id, int id, int

> > temp)

> >  {

> >         return 0;

> >  }

> > diff --git a/include/uapi/linux/thermal.h

> > b/include/uapi/linux/thermal.h

> > index c105054cbb57..bf5d9c8ef16f 100644

> > --- a/include/uapi/linux/thermal.h

> > +++ b/include/uapi/linux/thermal.h

> > @@ -18,7 +18,7 @@ enum thermal_trip_type {

> > 

> >  /* Adding event notification support elements */

> >  #define THERMAL_GENL_FAMILY_NAME               "thermal"

> > -#define THERMAL_GENL_VERSION                   0x01

> > +#define THERMAL_GENL_VERSION                   0x02

> >  #define THERMAL_GENL_SAMPLING_GROUP_NAME       "sampling"

> >  #define THERMAL_GENL_EVENT_GROUP_NAME          "event"

> > 

> > --

> > 2.17.1

> >
Daniel Lezcano March 27, 2021, 8:25 p.m. UTC | #4
Hi Srinivas,

On 27/03/2021 18:46, Srinivas Pandruvada wrote:
> On Fri, 2021-03-26 at 17:37 +0100, Rafael J. Wysocki wrote:

>> On Thu, Mar 25, 2021 at 8:38 PM Daniel Lezcano

>> <daniel.lezcano@linaro.org> wrote:

>>> The slope of the temperature increase or decrease can be high and

>>> when

>>> the temperature crosses the trip point, there could be a

>>> significant

>>> difference between the trip temperature and the measured

>>> temperatures.

>>>

>>> That forces the userspace to read the temperature back right after

>>> receiving a trip violation notification.

>>>

>>> In order to be efficient, give the temperature which resulted in

>>> the

>>> trip violation.

>>>

>>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

>>

>> Srinivas, what do you think?

> 

> - IMO netlink message should also be treated as we treat other ABIs. So

> add only when this is a must. Although here GENL version is incremented

> , users are not that careful. At least on x86, we know users created

> their own applications.


I don't see where is the problem. The protocol is still compatible with
the previous version, so that does not break the existing AFAICT. That
is done on purpose.

There is a new attribute added, the application using the previous
version will just not be aware of its presence and parse the message
without getting the temperature.

> - Here the concern is temperature is changing so fast then netlink +

> user space processing latency is enough to change further to read

> temperature again. Atleast we assume that and read temperature again.

> So not sure that this is the right approach to add another field for

> the temperature.


I'm not sure to understand your comment. Whatever the mechanism
(interrupt based or polling), the temperature is read in any case by the
call to thermal_zone_device_update() which in turns calls
handle_trip_point and then send the message. So, why not add the
temperature as the userspace is interested on getting the temperature
anyway.

For instance, in polling mode, (usually set to 1000ms), the trip point
crossing is detected with a long delay and during this time the
temperature could be far beyond the trip temperature.

It is not about netlink latency but about avoiding a back and forth when
the trip point is crossed and the temperature wavering around.


>>> ---

>>>  drivers/thermal/thermal_core.c    |  6 ++++--

>>>  drivers/thermal/thermal_netlink.c | 11 ++++++-----

>>>  drivers/thermal/thermal_netlink.h |  8 ++++----

>>>  include/uapi/linux/thermal.h      |  2 +-

>>>  4 files changed, 15 insertions(+), 12 deletions(-)

>>>

>>> diff --git a/drivers/thermal/thermal_core.c

>>> b/drivers/thermal/thermal_core.c

>>> index 996c038f83a4..948020ef51b1 100644

>>> --- a/drivers/thermal/thermal_core.c

>>> +++ b/drivers/thermal/thermal_core.c

>>> @@ -430,10 +430,12 @@ static void handle_thermal_trip(struct

>>> thermal_zone_device *tz, int trip)

>>>         if (tz->last_temperature != THERMAL_TEMP_INVALID) {

>>>                 if (tz->last_temperature < trip_temp &&

>>>                     tz->temperature >= trip_temp)

>>> -                       thermal_notify_tz_trip_up(tz->id, trip);

>>> +                       thermal_notify_tz_trip_up(tz->id, trip,

>>> +                                                 tz->temperature);

>>>                 if (tz->last_temperature >= trip_temp &&

>>>                     tz->temperature < (trip_temp - hyst))

>>> -                       thermal_notify_tz_trip_down(tz->id, trip);

>>> +                       thermal_notify_tz_trip_down(tz->id, trip,

>>> +                                                   tz-

>>>> temperature);

>>>         }

>>>

>>>         if (type == THERMAL_TRIP_CRITICAL || type ==

>>> THERMAL_TRIP_HOT)

>>> diff --git a/drivers/thermal/thermal_netlink.c

>>> b/drivers/thermal/thermal_netlink.c

>>> index 1234dbe95895..a16dd4d5d710 100644

>>> --- a/drivers/thermal/thermal_netlink.c

>>> +++ b/drivers/thermal/thermal_netlink.c

>>> @@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param

>>> *p)

>>>  static int thermal_genl_event_tz_trip_up(struct param *p)

>>>  {

>>>         if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id)

>>> ||

>>> -           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p-

>>>> trip_id))

>>> +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p-

>>>> trip_id) ||

>>> +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p-

>>>> temp))

>>>                 return -EMSGSIZE;

>>>

>>>         return 0;

>>> @@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)

>>>         return

>>> thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);

>>>  }

>>>

>>> -int thermal_notify_tz_trip_down(int tz_id, int trip_id)

>>> +int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)

>>>  {

>>> -       struct param p = { .tz_id = tz_id, .trip_id = trip_id };

>>> +       struct param p = { .tz_id = tz_id, .trip_id = trip_id,

>>> .temp = temp };

>>>

>>>         return

>>> thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);

>>>  }

>>>

>>> -int thermal_notify_tz_trip_up(int tz_id, int trip_id)

>>> +int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)

>>>  {

>>> -       struct param p = { .tz_id = tz_id, .trip_id = trip_id };

>>> +       struct param p = { .tz_id = tz_id, .trip_id = trip_id,

>>> .temp = temp };

>>>

>>>         return

>>> thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);

>>>  }

>>> diff --git a/drivers/thermal/thermal_netlink.h

>>> b/drivers/thermal/thermal_netlink.h

>>> index 828d1dddfa98..e554f76291f4 100644

>>> --- a/drivers/thermal/thermal_netlink.h

>>> +++ b/drivers/thermal/thermal_netlink.h

>>> @@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const

>>> char *name);

>>>  int thermal_notify_tz_delete(int tz_id);

>>>  int thermal_notify_tz_enable(int tz_id);

>>>  int thermal_notify_tz_disable(int tz_id);

>>> -int thermal_notify_tz_trip_down(int tz_id, int id);

>>> -int thermal_notify_tz_trip_up(int tz_id, int id);

>>> +int thermal_notify_tz_trip_down(int tz_id, int id, int temp);

>>> +int thermal_notify_tz_trip_up(int tz_id, int id, int temp);

>>>  int thermal_notify_tz_trip_delete(int tz_id, int id);

>>>  int thermal_notify_tz_trip_add(int tz_id, int id, int type,

>>>                                int temp, int hyst);

>>> @@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int

>>> tz_id)

>>>         return 0;

>>>  }

>>>

>>> -static inline int thermal_notify_tz_trip_down(int tz_id, int id)

>>> +static inline int thermal_notify_tz_trip_down(int tz_id, int id,

>>> int temp)

>>>  {

>>>         return 0;

>>>  }

>>>

>>> -static inline int thermal_notify_tz_trip_up(int tz_id, int id)

>>> +static inline int thermal_notify_tz_trip_up(int tz_id, int id, int

>>> temp)

>>>  {

>>>         return 0;

>>>  }

>>> diff --git a/include/uapi/linux/thermal.h

>>> b/include/uapi/linux/thermal.h

>>> index c105054cbb57..bf5d9c8ef16f 100644

>>> --- a/include/uapi/linux/thermal.h

>>> +++ b/include/uapi/linux/thermal.h

>>> @@ -18,7 +18,7 @@ enum thermal_trip_type {

>>>

>>>  /* Adding event notification support elements */

>>>  #define THERMAL_GENL_FAMILY_NAME               "thermal"

>>> -#define THERMAL_GENL_VERSION                   0x01

>>> +#define THERMAL_GENL_VERSION                   0x02

>>>  #define THERMAL_GENL_SAMPLING_GROUP_NAME       "sampling"

>>>  #define THERMAL_GENL_EVENT_GROUP_NAME          "event"

>>>

>>> --

>>> 2.17.1

>>>

> 



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Srinivas Pandruvada March 28, 2021, 7:31 p.m. UTC | #5
Hi Daniel,

On Sat, 2021-03-27 at 21:25 +0100, Daniel Lezcano wrote:
> Hi Srinivas,

> 

> On 27/03/2021 18:46, Srinivas Pandruvada wrote:

> > On Fri, 2021-03-26 at 17:37 +0100, Rafael J. Wysocki wrote:

> > > On Thu, Mar 25, 2021 at 8:38 PM Daniel Lezcano

> > > <daniel.lezcano@linaro.org> wrote:

> > > > The slope of the temperature increase or decrease can be high

> > > > and

> > > > when

> > > > the temperature crosses the trip point, there could be a

> > > > significant

> > > > difference between the trip temperature and the measured

> > > > temperatures.

> > > > 

> > > > That forces the userspace to read the temperature back right

> > > > after

> > > > receiving a trip violation notification.

> > > > 

> > > > In order to be efficient, give the temperature which resulted

> > > > in

> > > > the

> > > > trip violation.

> > > > 

> > > > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> > > 

> > > Srinivas, what do you think?

> > 

> > - IMO netlink message should also be treated as we treat other

> > ABIs. So

> > add only when this is a must. Although here GENL version is

> > incremented

> > , users are not that careful. At least on x86, we know users

> > created

> > their own applications.

> 

> I don't see where is the problem. The protocol is still compatible

> with

> the previous version, so that does not break the existing AFAICT.

> That

> is done on purpose.


The size of netlink message is changed. This is not a good argument to
just adding members at the end. The point I am trying that netlink now
is an ABI, which should go through same process as we are
adding/changing a sysfs attributes.
 

> 

> There is a new attribute added, the application using the previous

> version will just not be aware of its presence and parse the message

> without getting the temperature.

> 

> > - Here the concern is temperature is changing so fast then netlink

> > +

> > user space processing latency is enough to change further to read

> > temperature again. Atleast we assume that and read temperature

> > again.

> > So not sure that this is the right approach to add another field

> > for

> > the temperature.

> 

> I'm not sure to understand your comment. Whatever the mechanism

> (interrupt based or polling), the temperature is read in any case by

> the

> call to thermal_zone_device_update() which in turns calls

> handle_trip_point and then send the message. So, why not add the

> temperature as the userspace is interested on getting the temperature

> anyway.

> For instance, in polling mode, (usually set to 1000ms), the trip

> point

> crossing is detected with a long delay and during this time the

> temperature could be far beyond the trip temperature.

> cosnumer

> It is not about netlink latency but about avoiding a back and forth

> when

> the trip point is crossed and the temperature wavering around.


That is the reasoning given to add this change in the description that
slope of change is high so user is forced to read temperature again as
the trip temp +- current temp is significant. If slope is very high
then, when the temperature passed in the messages is already stale in
few ms, so the user space will still end up in re-reading again.

The reason you want to add temperature is that you sampled the latest
temperature during thermal_zone_device_update(), which may be different
than the trip temperature. So provide temperature also to user space
consumer, so it can decide whether to use as is or re-read sample. This
change will save one additional read from user space in some cases and
also allow disable notifications of trip if the temperature is hovering
around trip.
This is not to say that user can space totally can avoid another read.
Then fine with me.


Thanks,
Srinivas

> 

> 

> > > > ---

> > > >  drivers/thermal/thermal_core.c    |  6 ++++--

> > > >  drivers/thermal/thermal_netlink.c | 11 ++++++-----

> > > >  drivers/thermal/thermal_netlink.h |  8 ++++----

> > > >  include/uapi/linux/thermal.h      |  2 +-

> > > >  4 files changed, 15 insertions(+), 12 deletions(-)

> > > > 

> > > > diff --git a/drivers/thermal/thermal_core.c

> > > > b/drivers/thermal/thermal_core.c

> > > > index 996c038f83a4..948020ef51b1 100644

> > > > --- a/drivers/thermal/thermal_core.c

> > > > +++ b/drivers/thermal/thermal_core.c

> > > > @@ -430,10 +430,12 @@ static void handle_thermal_trip(struct

> > > > thermal_zone_device *tz, int trip)

> > > >         if (tz->last_temperature != THERMAL_TEMP_INVALID) {

> > > >                 if (tz->last_temperature < trip_temp &&

> > > >                     tz->temperature >= trip_temp)

> > > > -                       thermal_notify_tz_trip_up(tz->id,

> > > > trip);

> > > > +                       thermal_notify_tz_trip_up(tz->id, trip,

> > > > +                                                 tz-

> > > > >temperature);

> > > >                 if (tz->last_temperature >= trip_temp &&

> > > >                     tz->temperature < (trip_temp - hyst))

> > > > -                       thermal_notify_tz_trip_down(tz->id,

> > > > trip);

> > > > +                       thermal_notify_tz_trip_down(tz->id,

> > > > trip,

> > > > +                                                   tz-

> > > > > temperature);

> > > >         }

> > > > 

> > > >         if (type == THERMAL_TRIP_CRITICAL || type ==

> > > > THERMAL_TRIP_HOT)

> > > > diff --git a/drivers/thermal/thermal_netlink.c

> > > > b/drivers/thermal/thermal_netlink.c

> > > > index 1234dbe95895..a16dd4d5d710 100644

> > > > --- a/drivers/thermal/thermal_netlink.c

> > > > +++ b/drivers/thermal/thermal_netlink.c

> > > > @@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct

> > > > param

> > > > *p)

> > > >  static int thermal_genl_event_tz_trip_up(struct param *p)

> > > >  {

> > > >         if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p-

> > > > >tz_id)

> > > > -           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID,

> > > > p-

> > > > > trip_id))

> > > > +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID,

> > > > p-

> > > > > trip_id) ||

> > > > +           nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p-

> > > > > temp))

> > > >                 return -EMSGSIZE;

> > > > 

> > > >         return 0;

> > > > @@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)

> > > >         return

> > > > thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);

> > > >  }

> > > > 

> > > > -int thermal_notify_tz_trip_down(int tz_id, int trip_id)

> > > > +int thermal_notify_tz_trip_down(int tz_id, int trip_id, int

> > > > temp)

> > > >  {

> > > > -       struct param p = { .tz_id = tz_id, .trip_id = trip_id

> > > > };

> > > > +       struct param p = { .tz_id = tz_id, .trip_id = trip_id,

> > > > .temp = temp };

> > > > 

> > > >         return

> > > > thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);

> > > >  }

> > > > 

> > > > -int thermal_notify_tz_trip_up(int tz_id, int trip_id)

> > > > +int thermal_notify_tz_trip_up(int tz_id, int trip_id, int

> > > > temp)

> > > >  {

> > > > -       struct param p = { .tz_id = tz_id, .trip_id = trip_id

> > > > };

> > > > +       struct param p = { .tz_id = tz_id, .trip_id = trip_id,

> > > > .temp = temp };

> > > > 

> > > >         return

> > > > thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);

> > > >  }

> > > > diff --git a/drivers/thermal/thermal_netlink.h

> > > > b/drivers/thermal/thermal_netlink.h

> > > > index 828d1dddfa98..e554f76291f4 100644

> > > > --- a/drivers/thermal/thermal_netlink.h

> > > > +++ b/drivers/thermal/thermal_netlink.h

> > > > @@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const

> > > > char *name);

> > > >  int thermal_notify_tz_delete(int tz_id);

> > > >  int thermal_notify_tz_enable(int tz_id);

> > > >  int thermal_notify_tz_disable(int tz_id);

> > > > -int thermal_notify_tz_trip_down(int tz_id, int id);

> > > > -int thermal_notify_tz_trip_up(int tz_id, int id);

> > > > +int thermal_notify_tz_trip_down(int tz_id, int id, int temp);

> > > > +int thermal_notify_tz_trip_up(int tz_id, int id, int temp);

> > > >  int thermal_notify_tz_trip_delete(int tz_id, int id);

> > > >  int thermal_notify_tz_trip_add(int tz_id, int id, int type,

> > > >                                int temp, int hyst);

> > > > @@ -49,12 +49,12 @@ static inline int

> > > > thermal_notify_tz_disable(int

> > > > tz_id)

> > > >         return 0;

> > > >  }

> > > > 

> > > > -static inline int thermal_notify_tz_trip_down(int tz_id, int

> > > > id)

> > > > +static inline int thermal_notify_tz_trip_down(int tz_id, int

> > > > id,

> > > > int temp)

> > > >  {

> > > >         return 0;

> > > >  }

> > > > 

> > > > -static inline int thermal_notify_tz_trip_up(int tz_id, int id)

> > > > +static inline int thermal_notify_tz_trip_up(int tz_id, int id,

> > > > int

> > > > temp)

> > > >  {

> > > >         return 0;

> > > >  }

> > > > diff --git a/include/uapi/linux/thermal.h

> > > > b/include/uapi/linux/thermal.h

> > > > index c105054cbb57..bf5d9c8ef16f 100644

> > > > --- a/include/uapi/linux/thermal.h

> > > > +++ b/include/uapi/linux/thermal.h

> > > > @@ -18,7 +18,7 @@ enum thermal_trip_type {

> > > > 

> > > >  /* Adding event notification support elements */

> > > >  #define THERMAL_GENL_FAMILY_NAME               "thermal"

> > > > -#define THERMAL_GENL_VERSION                   0x01

> > > > +#define THERMAL_GENL_VERSION                   0x02

> > > >  #define THERMAL_GENL_SAMPLING_GROUP_NAME       "sampling"

> > > >  #define THERMAL_GENL_EVENT_GROUP_NAME          "event"

> > > > 

> > > > --

> > > > 2.17.1

> > > > 

> 

>
Daniel Lezcano March 28, 2021, 8:54 p.m. UTC | #6
On 28/03/2021 21:31, Srinivas Pandruvada wrote:
> Hi Daniel,


[ ... ]

>> I don't see where is the problem. The protocol is still compatible

>> with

>> the previous version, so that does not break the existing AFAICT.

>> That

>> is done on purpose.

> 

> The size of netlink message is changed. This is not a good argument to

> just adding members at the end. The point I am trying that netlink now

> is an ABI, which should go through same process as we are

> adding/changing a sysfs attributes.

>  


Ok I understand your point. I will provide a description in
Documentation/ABI/testing, something I should have done before and take
the opportunity to provide a bigger update of the thermal netlink
messages with more commands.

Thanks
  -- Daniel

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
diff mbox series

Patch

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 996c038f83a4..948020ef51b1 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -430,10 +430,12 @@  static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 	if (tz->last_temperature != THERMAL_TEMP_INVALID) {
 		if (tz->last_temperature < trip_temp &&
 		    tz->temperature >= trip_temp)
-			thermal_notify_tz_trip_up(tz->id, trip);
+			thermal_notify_tz_trip_up(tz->id, trip,
+						  tz->temperature);
 		if (tz->last_temperature >= trip_temp &&
 		    tz->temperature < (trip_temp - hyst))
-			thermal_notify_tz_trip_down(tz->id, trip);
+			thermal_notify_tz_trip_down(tz->id, trip,
+						    tz->temperature);
 	}
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
index 1234dbe95895..a16dd4d5d710 100644
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c
@@ -121,7 +121,8 @@  static int thermal_genl_event_tz(struct param *p)
 static int thermal_genl_event_tz_trip_up(struct param *p)
 {
 	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
-	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))
 		return -EMSGSIZE;
 
 	return 0;
@@ -285,16 +286,16 @@  int thermal_notify_tz_disable(int tz_id)
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);
 }
 
-int thermal_notify_tz_trip_down(int tz_id, int trip_id)
+int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)
 {
-	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
 
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);
 }
 
-int thermal_notify_tz_trip_up(int tz_id, int trip_id)
+int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)
 {
-	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
 
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);
 }
diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h
index 828d1dddfa98..e554f76291f4 100644
--- a/drivers/thermal/thermal_netlink.h
+++ b/drivers/thermal/thermal_netlink.h
@@ -11,8 +11,8 @@  int thermal_notify_tz_create(int tz_id, const char *name);
 int thermal_notify_tz_delete(int tz_id);
 int thermal_notify_tz_enable(int tz_id);
 int thermal_notify_tz_disable(int tz_id);
-int thermal_notify_tz_trip_down(int tz_id, int id);
-int thermal_notify_tz_trip_up(int tz_id, int id);
+int thermal_notify_tz_trip_down(int tz_id, int id, int temp);
+int thermal_notify_tz_trip_up(int tz_id, int id, int temp);
 int thermal_notify_tz_trip_delete(int tz_id, int id);
 int thermal_notify_tz_trip_add(int tz_id, int id, int type,
 			       int temp, int hyst);
@@ -49,12 +49,12 @@  static inline int thermal_notify_tz_disable(int tz_id)
 	return 0;
 }
 
-static inline int thermal_notify_tz_trip_down(int tz_id, int id)
+static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)
 {
 	return 0;
 }
 
-static inline int thermal_notify_tz_trip_up(int tz_id, int id)
+static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)
 {
 	return 0;
 }
diff --git a/include/uapi/linux/thermal.h b/include/uapi/linux/thermal.h
index c105054cbb57..bf5d9c8ef16f 100644
--- a/include/uapi/linux/thermal.h
+++ b/include/uapi/linux/thermal.h
@@ -18,7 +18,7 @@  enum thermal_trip_type {
 
 /* Adding event notification support elements */
 #define THERMAL_GENL_FAMILY_NAME		"thermal"
-#define THERMAL_GENL_VERSION			0x01
+#define THERMAL_GENL_VERSION			0x02
 #define THERMAL_GENL_SAMPLING_GROUP_NAME	"sampling"
 #define THERMAL_GENL_EVENT_GROUP_NAME		"event"