diff mbox series

i2c: cp2615: check for allocation failure in cp2615_i2c_recv()

Message ID YJuosd6rew91vlyX@mwanda
State Accepted
Commit 2269583753d2b8fdd3c861a516ff0cdbfcf4ef0b
Headers show
Series i2c: cp2615: check for allocation failure in cp2615_i2c_recv() | expand

Commit Message

Dan Carpenter May 12, 2021, 10:06 a.m. UTC
We need to add a check for if the kzalloc() fails.

Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/i2c/busses/i2c-cp2615.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

Comments

Bence Csókás May 12, 2021, 10:54 a.m. UTC | #1
Dan Carpenter <dan.carpenter@oracle.com> ezt írta (időpont: 2021. máj.
12., Sze, 12:07):
>
> We need to add a check for if the kzalloc() fails.

That is correct, I missed that :/

>
> Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> ---
>  drivers/i2c/busses/i2c-cp2615.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
> index 78cfecd1ea76..3ded28632e4c 100644
> --- a/drivers/i2c/busses/i2c-cp2615.c
> +++ b/drivers/i2c/busses/i2c-cp2615.c
> @@ -138,17 +138,23 @@ cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
>  static int
>  cp2615_i2c_recv(struct usb_interface *usbif, unsigned char tag, void *buf)
>  {
> -       struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> -       struct cp2615_i2c_transfer_result *i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;

These two lines could stay as-is, since the invalid i2c_r will never be used.

>         struct usb_device *usbdev = interface_to_usbdev(usbif);
> -       int res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
> -                              msg, sizeof(struct cp2615_iop_msg), NULL, 0);
> +       struct cp2615_iop_msg *msg;
> +       struct cp2615_i2c_transfer_result *i2c_r;
> +       int res;
> +
> +       msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> +       if (!msg)
> +               return -ENOMEM;

You will want to also make `cp2615_init_iop_msg()` return -ENOMEM
instead of -EINVAL, for consistency's sake.

>
> +       res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN), msg,
> +                          sizeof(struct cp2615_iop_msg), NULL, 0);
>         if (res < 0) {
>                 kfree(msg);
>                 return res;
>         }
>
> +       i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
>         if (msg->msg != htons(iop_I2cTransferResult) || i2c_r->tag != tag) {
>                 kfree(msg);
>                 return -EIO;
> --
> 2.30.2
>

Otherwise, the patch looks good, I shall sign off on the next version
Dan Carpenter May 12, 2021, 1:10 p.m. UTC | #2
On Wed, May 12, 2021 at 12:54:47PM +0200, Bence Csókás wrote:
> Dan Carpenter <dan.carpenter@oracle.com> ezt írta (időpont: 2021. máj.
> 12., Sze, 12:07):
> >
> > We need to add a check for if the kzalloc() fails.
> 
> That is correct, I missed that :/
> 
> >
> > Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > ---
> >  drivers/i2c/busses/i2c-cp2615.c | 14 ++++++++++----
> >  1 file changed, 10 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
> > index 78cfecd1ea76..3ded28632e4c 100644
> > --- a/drivers/i2c/busses/i2c-cp2615.c
> > +++ b/drivers/i2c/busses/i2c-cp2615.c
> > @@ -138,17 +138,23 @@ cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
> >  static int
> >  cp2615_i2c_recv(struct usb_interface *usbif, unsigned char tag, void *buf)
> >  {
> > -       struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> > -       struct cp2615_i2c_transfer_result *i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
> 
> These two lines could stay as-is, since the invalid i2c_r will never be used.
> 

Yeah, I know but people shouldn't put functions which can fail inside
the declaration block.  And I also know that doing:

	struct cp2615_i2c_transfer_result *i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;

is fine even when "msg" is NULL.  But don't do that, because it is ugly.

> >         struct usb_device *usbdev = interface_to_usbdev(usbif);
> > -       int res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
> > -                              msg, sizeof(struct cp2615_iop_msg), NULL, 0);
> > +       struct cp2615_iop_msg *msg;
> > +       struct cp2615_i2c_transfer_result *i2c_r;
> > +       int res;
> > +
> > +       msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> > +       if (!msg)
> > +               return -ENOMEM;
> 
> You will want to also make `cp2615_init_iop_msg()` return -ENOMEM
> instead of -EINVAL, for consistency's sake.
> 

I view that as unrelated and I'm sorry but this error handling code is
not really best practices...  I don't have time to fix it up.  :/

drivers/i2c/busses/i2c-cp2615.c
   124  static int
   125  cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
   126  {
   127          struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);

Don't put functions which can fail inside the declaration block.
Although, it is relatively uncommon to put allocations inside the
declaration block these sorts of allocations are over represented when
it comes to memory leaks and other static analysis bugs.

   128          struct usb_device *usbdev = interface_to_usbdev(usbif);
   129          int res = cp2615_init_i2c_msg(msg, i2c_w);

Handle failures immediately.  Try not to mix the error paths and the
success paths.  After a function call, then you're going to have to deal
with both failure and success path, but the failure path is just
"clean up and return an error code" and the success path is hopefully
going to continue for days or months.  So get the shorter failure path
out of the way first, then continue with the success path.

   130  
   131          if (!res)

Always do error handling, don't do success handling.

   132                  res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
   133                                     msg, ntohs(msg->length), NULL, 0);

The success path should be indented one tab and the error handling
should be indented two tabs.

   134          kfree(msg);
   135          return res;
   136  }

The function should look like this.

static int
cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
{
	struct usb_device *usbdev = interface_to_usbdev(usbif);
	struct cp2615_iop_msg *msg;
	int res;

	msg = kzalloc(sizeof(*msg), GFP_KERNEL);
	if (!msg)
		return -ENOMEM;

	res = cp2615_init_i2c_msg(msg, i2c_w);
	if (res)
		goto free;

	res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
			   msg, ntohs(msg->length), NULL, 0);
free:
        kfree(msg);
        return res;
}

regards,
dan carpenter
Bence Csókás May 12, 2021, 1:52 p.m. UTC | #3
All right, if you want to do that, fine. I did it this way, because it
took 1 less `goto`s... But your approach is equally valid.

But, to keep it consistent, if you change it one place, change it
everywhere else.

Regards,
Bence

Dan Carpenter <dan.carpenter@oracle.com> ezt írta (időpont: 2021. máj.
12., Sze, 15:11):
>
> On Wed, May 12, 2021 at 12:54:47PM +0200, Bence Csókás wrote:
> > Dan Carpenter <dan.carpenter@oracle.com> ezt írta (időpont: 2021. máj.
> > 12., Sze, 12:07):
> > >
> > > We need to add a check for if the kzalloc() fails.
> >
> > That is correct, I missed that :/
> >
> > >
> > > Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
> > > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> > > ---
> > >  drivers/i2c/busses/i2c-cp2615.c | 14 ++++++++++----
> > >  1 file changed, 10 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
> > > index 78cfecd1ea76..3ded28632e4c 100644
> > > --- a/drivers/i2c/busses/i2c-cp2615.c
> > > +++ b/drivers/i2c/busses/i2c-cp2615.c
> > > @@ -138,17 +138,23 @@ cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
> > >  static int
> > >  cp2615_i2c_recv(struct usb_interface *usbif, unsigned char tag, void *buf)
> > >  {
> > > -       struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> > > -       struct cp2615_i2c_transfer_result *i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
> >
> > These two lines could stay as-is, since the invalid i2c_r will never be used.
> >
>
> Yeah, I know but people shouldn't put functions which can fail inside
> the declaration block.  And I also know that doing:
>
>         struct cp2615_i2c_transfer_result *i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
>
> is fine even when "msg" is NULL.  But don't do that, because it is ugly.
>
> > >         struct usb_device *usbdev = interface_to_usbdev(usbif);
> > > -       int res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
> > > -                              msg, sizeof(struct cp2615_iop_msg), NULL, 0);
> > > +       struct cp2615_iop_msg *msg;
> > > +       struct cp2615_i2c_transfer_result *i2c_r;
> > > +       int res;
> > > +
> > > +       msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> > > +       if (!msg)
> > > +               return -ENOMEM;
> >
> > You will want to also make `cp2615_init_iop_msg()` return -ENOMEM
> > instead of -EINVAL, for consistency's sake.
> >
>
> I view that as unrelated and I'm sorry but this error handling code is
> not really best practices...  I don't have time to fix it up.  :/
>
> drivers/i2c/busses/i2c-cp2615.c
>    124  static int
>    125  cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
>    126  {
>    127          struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
>
> Don't put functions which can fail inside the declaration block.
> Although, it is relatively uncommon to put allocations inside the
> declaration block these sorts of allocations are over represented when
> it comes to memory leaks and other static analysis bugs.
>
>    128          struct usb_device *usbdev = interface_to_usbdev(usbif);
>    129          int res = cp2615_init_i2c_msg(msg, i2c_w);
>
> Handle failures immediately.  Try not to mix the error paths and the
> success paths.  After a function call, then you're going to have to deal
> with both failure and success path, but the failure path is just
> "clean up and return an error code" and the success path is hopefully
> going to continue for days or months.  So get the shorter failure path
> out of the way first, then continue with the success path.
>
>    130
>    131          if (!res)
>
> Always do error handling, don't do success handling.
>
>    132                  res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
>    133                                     msg, ntohs(msg->length), NULL, 0);
>
> The success path should be indented one tab and the error handling
> should be indented two tabs.
>
>    134          kfree(msg);
>    135          return res;
>    136  }
>
> The function should look like this.
>
> static int
> cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
> {
>         struct usb_device *usbdev = interface_to_usbdev(usbif);
>         struct cp2615_iop_msg *msg;
>         int res;
>
>         msg = kzalloc(sizeof(*msg), GFP_KERNEL);
>         if (!msg)
>                 return -ENOMEM;
>
>         res = cp2615_init_i2c_msg(msg, i2c_w);
>         if (res)
>                 goto free;
>
>         res = usb_bulk_msg(usbdev, usb_sndbulkpipe(usbdev, IOP_EP_OUT),
>                            msg, ntohs(msg->length), NULL, 0);
> free:
>         kfree(msg);
>         return res;
> }
>
> regards,
> dan carpenter
>
Wolfram Sang June 4, 2021, 8:44 p.m. UTC | #4
On Wed, May 12, 2021 at 01:06:41PM +0300, Dan Carpenter wrote:
> We need to add a check for if the kzalloc() fails.

> 

> Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")

> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>


Bence, are you okay with applying this patch as it fixes a bug?
Bence Csókás June 5, 2021, 5:17 a.m. UTC | #5
Sure, though I had hoped Dan would update his patch so that all
allocation failures return -ENOMEM... Oh well.

Signed-off-by: Bence Csókás<bence98@sch.bme.hu>



Wolfram Sang <wsa@kernel.org> ezt írta (időpont: 2021. jún. 4., P 22:45):
>

> On Wed, May 12, 2021 at 01:06:41PM +0300, Dan Carpenter wrote:

> > We need to add a check for if the kzalloc() fails.

> >

> > Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")

> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

>

> Bence, are you okay with applying this patch as it fixes a bug?

>
Wolfram Sang June 20, 2021, 9:12 p.m. UTC | #6
On Wed, May 12, 2021 at 01:06:41PM +0300, Dan Carpenter wrote:
> We need to add a check for if the kzalloc() fails.

> 

> Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")

> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>


Applied to for-current, thanks!
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
index 78cfecd1ea76..3ded28632e4c 100644
--- a/drivers/i2c/busses/i2c-cp2615.c
+++ b/drivers/i2c/busses/i2c-cp2615.c
@@ -138,17 +138,23 @@  cp2615_i2c_send(struct usb_interface *usbif, struct cp2615_i2c_transfer *i2c_w)
 static int
 cp2615_i2c_recv(struct usb_interface *usbif, unsigned char tag, void *buf)
 {
-	struct cp2615_iop_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
-	struct cp2615_i2c_transfer_result *i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
 	struct usb_device *usbdev = interface_to_usbdev(usbif);
-	int res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN),
-			       msg, sizeof(struct cp2615_iop_msg), NULL, 0);
+	struct cp2615_iop_msg *msg;
+	struct cp2615_i2c_transfer_result *i2c_r;
+	int res;
+
+	msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
 
+	res = usb_bulk_msg(usbdev, usb_rcvbulkpipe(usbdev, IOP_EP_IN), msg,
+			   sizeof(struct cp2615_iop_msg), NULL, 0);
 	if (res < 0) {
 		kfree(msg);
 		return res;
 	}
 
+	i2c_r = (struct cp2615_i2c_transfer_result *)&msg->data;
 	if (msg->msg != htons(iop_I2cTransferResult) || i2c_r->tag != tag) {
 		kfree(msg);
 		return -EIO;