diff mbox series

[v3,04/17] dt-bindings: qcom-qce: Convert bindings to yaml

Message ID 20210519143700.27392-5-bhupesh.sharma@linaro.org
State New
Headers show
Series Enable Qualcomm Crypto Engine on sm8250 | expand

Commit Message

Bhupesh Sharma May 19, 2021, 2:36 p.m. UTC
Convert Qualcomm QCE crypto devicetree binding to YAML.

Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: bhupesh.linux@gmail.com
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

---
 .../devicetree/bindings/crypto/qcom-qce.txt   | 25 -------
 .../devicetree/bindings/crypto/qcom-qce.yaml  | 69 +++++++++++++++++++
 2 files changed, 69 insertions(+), 25 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt
 create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml

-- 
2.31.1

Comments

Rob Herring (Arm) May 21, 2021, 1:45 a.m. UTC | #1
On Wed, May 19, 2021 at 08:06:47PM +0530, Bhupesh Sharma wrote:
> Convert Qualcomm QCE crypto devicetree binding to YAML.
> 
> Cc: Thara Gopinath <thara.gopinath@linaro.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Andy Gross <agross@kernel.org>
> Cc: Herbert Xu <herbert@gondor.apana.org.au>
> Cc: David S. Miller <davem@davemloft.net>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: dmaengine@vger.kernel.org
> Cc: linux-clk@vger.kernel.org
> Cc: linux-crypto@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: bhupesh.linux@gmail.com
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  .../devicetree/bindings/crypto/qcom-qce.txt   | 25 -------
>  .../devicetree/bindings/crypto/qcom-qce.yaml  | 69 +++++++++++++++++++
>  2 files changed, 69 insertions(+), 25 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt
>  create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> 
> diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
> deleted file mode 100644
> index fdd53b184ba8..000000000000
> --- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -Qualcomm crypto engine driver
> -
> -Required properties:
> -
> -- compatible  : should be "qcom,crypto-v5.1"
> -- reg         : specifies base physical address and size of the registers map
> -- clocks      : phandle to clock-controller plus clock-specifier pair
> -- clock-names : "iface" clocks register interface
> -                "bus" clocks data transfer interface
> -                "core" clocks rest of the crypto block
> -- dmas        : DMA specifiers for tx and rx dma channels. For more see
> -                Documentation/devicetree/bindings/dma/dma.txt
> -- dma-names   : DMA request names should be "rx" and "tx"
> -
> -Example:
> -	crypto@fd45a000 {
> -		compatible = "qcom,crypto-v5.1";
> -		reg = <0xfd45a000 0x6000>;
> -		clocks = <&gcc GCC_CE2_AHB_CLK>,
> -			 <&gcc GCC_CE2_AXI_CLK>,
> -			 <&gcc GCC_CE2_CLK>;
> -		clock-names = "iface", "bus", "core";
> -		dmas = <&cryptobam 2>, <&cryptobam 3>;
> -		dma-names = "rx", "tx";
> -	};
> diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> new file mode 100644
> index 000000000000..a691cd08f372
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm crypto engine driver
> +
> +maintainers:
> +  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
> +
> +description: |
> +  This document defines the binding for the QCE crypto
> +  controller found on Qualcomm parts.
> +
> +properties:
> +  compatible:
> +    const: qcom,crypto-v5.1
> +
> +  reg:
> +    maxItems: 1
> +    description: |
> +      Specifies base physical address and size of the registers map.

Yep, that's every 'reg'. Drop.

With that dropped,

Reviewed-by: Rob Herring <robh@kernel.org>

> +
> +  clocks:
> +    items:
> +      - description: iface clocks register interface.
> +      - description: bus clocks data transfer interface.
> +      - description: core clocks rest of the crypto block.
> +
> +  clock-names:
> +    items:
> +      - const: iface
> +      - const: bus
> +      - const: core
> +
> +  dmas:
> +    items:
> +      - description: DMA specifiers for tx dma channel.
> +      - description: DMA specifiers for rx dma channel.
> +
> +  dma-names:
> +    items:
> +      - const: rx
> +      - const: tx
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - dmas
> +  - dma-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-apq8084.h>
> +    crypto-engine@fd45a000 {
> +        compatible = "qcom,crypto-v5.1";
> +        reg = <0xfd45a000 0x6000>;
> +        clocks = <&gcc GCC_CE2_AHB_CLK>,
> +                 <&gcc GCC_CE2_AXI_CLK>,
> +                 <&gcc GCC_CE2_CLK>;
> +        clock-names = "iface", "bus", "core";
> +        dmas = <&cryptobam 2>, <&cryptobam 3>;
> +        dma-names = "rx", "tx";
> +    };
> -- 
> 2.31.1
>
Bhupesh Sharma June 4, 2021, 3:41 a.m. UTC | #2
Hi Rob,

On Fri, 21 May 2021 at 07:15, Rob Herring <robh@kernel.org> wrote:
>
> On Wed, May 19, 2021 at 08:06:47PM +0530, Bhupesh Sharma wrote:
> > Convert Qualcomm QCE crypto devicetree binding to YAML.
> >
> > Cc: Thara Gopinath <thara.gopinath@linaro.org>
> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Andy Gross <agross@kernel.org>
> > Cc: Herbert Xu <herbert@gondor.apana.org.au>
> > Cc: David S. Miller <davem@davemloft.net>
> > Cc: Stephen Boyd <sboyd@kernel.org>
> > Cc: Michael Turquette <mturquette@baylibre.com>
> > Cc: Vinod Koul <vkoul@kernel.org>
> > Cc: dmaengine@vger.kernel.org
> > Cc: linux-clk@vger.kernel.org
> > Cc: linux-crypto@vger.kernel.org
> > Cc: devicetree@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: bhupesh.linux@gmail.com
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  .../devicetree/bindings/crypto/qcom-qce.txt   | 25 -------
> >  .../devicetree/bindings/crypto/qcom-qce.yaml  | 69 +++++++++++++++++++
> >  2 files changed, 69 insertions(+), 25 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.txt
> >  create mode 100644 Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
> > deleted file mode 100644
> > index fdd53b184ba8..000000000000
> > --- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
> > +++ /dev/null
> > @@ -1,25 +0,0 @@
> > -Qualcomm crypto engine driver
> > -
> > -Required properties:
> > -
> > -- compatible  : should be "qcom,crypto-v5.1"
> > -- reg         : specifies base physical address and size of the registers map
> > -- clocks      : phandle to clock-controller plus clock-specifier pair
> > -- clock-names : "iface" clocks register interface
> > -                "bus" clocks data transfer interface
> > -                "core" clocks rest of the crypto block
> > -- dmas        : DMA specifiers for tx and rx dma channels. For more see
> > -                Documentation/devicetree/bindings/dma/dma.txt
> > -- dma-names   : DMA request names should be "rx" and "tx"
> > -
> > -Example:
> > -     crypto@fd45a000 {
> > -             compatible = "qcom,crypto-v5.1";
> > -             reg = <0xfd45a000 0x6000>;
> > -             clocks = <&gcc GCC_CE2_AHB_CLK>,
> > -                      <&gcc GCC_CE2_AXI_CLK>,
> > -                      <&gcc GCC_CE2_CLK>;
> > -             clock-names = "iface", "bus", "core";
> > -             dmas = <&cryptobam 2>, <&cryptobam 3>;
> > -             dma-names = "rx", "tx";
> > -     };
> > diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> > new file mode 100644
> > index 000000000000..a691cd08f372
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm crypto engine driver
> > +
> > +maintainers:
> > +  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > +
> > +description: |
> > +  This document defines the binding for the QCE crypto
> > +  controller found on Qualcomm parts.
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,crypto-v5.1
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: |
> > +      Specifies base physical address and size of the registers map.
>
> Yep, that's every 'reg'. Drop.
>
> With that dropped,
>
> Reviewed-by: Rob Herring <robh@kernel.org>

Ok, I will drop this in v4.

Thanks,
Bhupesh

> > +
> > +  clocks:
> > +    items:
> > +      - description: iface clocks register interface.
> > +      - description: bus clocks data transfer interface.
> > +      - description: core clocks rest of the crypto block.
> > +
> > +  clock-names:
> > +    items:
> > +      - const: iface
> > +      - const: bus
> > +      - const: core
> > +
> > +  dmas:
> > +    items:
> > +      - description: DMA specifiers for tx dma channel.
> > +      - description: DMA specifiers for rx dma channel.
> > +
> > +  dma-names:
> > +    items:
> > +      - const: rx
> > +      - const: tx
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - dmas
> > +  - dma-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/qcom,gcc-apq8084.h>
> > +    crypto-engine@fd45a000 {
> > +        compatible = "qcom,crypto-v5.1";
> > +        reg = <0xfd45a000 0x6000>;
> > +        clocks = <&gcc GCC_CE2_AHB_CLK>,
> > +                 <&gcc GCC_CE2_AXI_CLK>,
> > +                 <&gcc GCC_CE2_CLK>;
> > +        clock-names = "iface", "bus", "core";
> > +        dmas = <&cryptobam 2>, <&cryptobam 3>;
> > +        dma-names = "rx", "tx";
> > +    };
> > --
> > 2.31.1
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
deleted file mode 100644
index fdd53b184ba8..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
+++ /dev/null
@@ -1,25 +0,0 @@ 
-Qualcomm crypto engine driver
-
-Required properties:
-
-- compatible  : should be "qcom,crypto-v5.1"
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "iface" clocks register interface
-                "bus" clocks data transfer interface
-                "core" clocks rest of the crypto block
-- dmas        : DMA specifiers for tx and rx dma channels. For more see
-                Documentation/devicetree/bindings/dma/dma.txt
-- dma-names   : DMA request names should be "rx" and "tx"
-
-Example:
-	crypto@fd45a000 {
-		compatible = "qcom,crypto-v5.1";
-		reg = <0xfd45a000 0x6000>;
-		clocks = <&gcc GCC_CE2_AHB_CLK>,
-			 <&gcc GCC_CE2_AXI_CLK>,
-			 <&gcc GCC_CE2_CLK>;
-		clock-names = "iface", "bus", "core";
-		dmas = <&cryptobam 2>, <&cryptobam 3>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
new file mode 100644
index 000000000000..a691cd08f372
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -0,0 +1,69 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm crypto engine driver
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description: |
+  This document defines the binding for the QCE crypto
+  controller found on Qualcomm parts.
+
+properties:
+  compatible:
+    const: qcom,crypto-v5.1
+
+  reg:
+    maxItems: 1
+    description: |
+      Specifies base physical address and size of the registers map.
+
+  clocks:
+    items:
+      - description: iface clocks register interface.
+      - description: bus clocks data transfer interface.
+      - description: core clocks rest of the crypto block.
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  dmas:
+    items:
+      - description: DMA specifiers for tx dma channel.
+      - description: DMA specifiers for rx dma channel.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-apq8084.h>
+    crypto-engine@fd45a000 {
+        compatible = "qcom,crypto-v5.1";
+        reg = <0xfd45a000 0x6000>;
+        clocks = <&gcc GCC_CE2_AHB_CLK>,
+                 <&gcc GCC_CE2_AXI_CLK>,
+                 <&gcc GCC_CE2_CLK>;
+        clock-names = "iface", "bus", "core";
+        dmas = <&cryptobam 2>, <&cryptobam 3>;
+        dma-names = "rx", "tx";
+    };