diff mbox series

[2/8] dt-bindings: serial: fsl-linflexuart: convert to json-schema format

Message ID 20210805065429.27485-3-clin@suse.com
State Superseded
Headers show
Series arm64: dts: initial NXP S32G2 support | expand

Commit Message

Chester Lin Aug. 5, 2021, 6:54 a.m. UTC
Convert the FSL LINFlexD UART binding to json-schema.

Signed-off-by: Chester Lin <clin@suse.com>
---
 .../bindings/serial/fsl,s32-linflexuart.txt   | 22 ---------
 .../bindings/serial/fsl,s32-linflexuart.yaml  | 48 +++++++++++++++++++
 2 files changed, 48 insertions(+), 22 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

Comments

Andreas Färber Aug. 12, 2021, 4:04 p.m. UTC | #1
On 05.08.21 08:54, Chester Lin wrote:
> Convert the FSL LINFlexD UART binding to json-schema.

> 

> Signed-off-by: Chester Lin <clin@suse.com>

> ---

>  .../bindings/serial/fsl,s32-linflexuart.txt   | 22 ---------

>  .../bindings/serial/fsl,s32-linflexuart.yaml  | 48 +++++++++++++++++++

>  2 files changed, 48 insertions(+), 22 deletions(-)

>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

>  create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml


Thanks for your effort, Chester.

> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> deleted file mode 100644

> index f1bbe0826be5..000000000000

> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> +++ /dev/null

> @@ -1,22 +0,0 @@

> -* Freescale LINFlexD UART

> -

> -The LINFlexD controller implements several LIN protocol versions, as well as

> -support for full-duplex UART communication through 8-bit and 9-bit frames.

> -

> -See chapter 47 ("LINFlexD") in the reference manual[1].

> -

> -Required properties:

> -- compatible :

> -  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which

> -    is compatible with the one integrated on S32V234 SoC

> -- reg : Address and length of the register set for the device

> -- interrupts : Should contain uart interrupt

> -

> -Example:

> -uart0: serial@40053000 {

> -	compatible = "fsl,s32v234-linflexuart";

> -	reg = <0x0 0x40053000 0x0 0x1000>;

> -	interrupts = <0 59 4>;

> -};

> -

> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM

> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> new file mode 100644

> index 000000000000..acfe34706ccb

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> @@ -0,0 +1,48 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)


Since this is dual-licensed and BSD-2-Clause would seem compatible with
GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a
blocker.

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: Freescale LINFlexD UART

> +

> +description: |

> +  The LINFlexD controller implements several LIN protocol versions, as well

> +  as support for full-duplex UART communication through 8-bit and 9-bit

> +  frames. See chapter 47 ("LINFlexD") in the reference manual

> +  https://www.nxp.com/webapp/Download?colCode=S32V234RM.

> +

> +maintainers:

> +  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>

> +  - Rob Herring <robh@kernel.org>


@Shawn: I assume we need both of them to ack this (or an S32V maintainer
to volunteer), since they were not named in the .txt file before?

> +

> +allOf:

> +  - $ref: "serial.yaml"

> +

> +properties:

> +  compatible:

> +    description: The LINFlexD controller on S32V234 SoC, which can be

> +      configured in UART mode.

> +    items:

> +      - const: fsl,s32v234-linflexuart

> +

> +  reg:

> +    maxItems: 1

> +

> +  interrupts:

> +    maxItems: 1

> +

> +required:

> +  - compatible

> +  - reg

> +  - interrupts

> +

> +unevaluatedProperties: false

> +

> +examples:

> +  - |

> +    serial@40053000 {

> +        compatible = "fsl,s32v234-linflexuart";

> +        reg = <0x40053000 0x1000>;

> +        interrupts = <0 59 4>;

> +    };


Otherwise looking sane,

Reviewed-by: Andreas Färber <afaerber@suse.de>


Thanks,
Andreas

-- 
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
Chester Lin Aug. 13, 2021, 11:11 a.m. UTC | #2
Hi Andreas,

On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote:
> On 05.08.21 08:54, Chester Lin wrote:

> > Convert the FSL LINFlexD UART binding to json-schema.

> > 

> > Signed-off-by: Chester Lin <clin@suse.com>

> > ---

> >  .../bindings/serial/fsl,s32-linflexuart.txt   | 22 ---------

> >  .../bindings/serial/fsl,s32-linflexuart.yaml  | 48 +++++++++++++++++++

> >  2 files changed, 48 insertions(+), 22 deletions(-)

> >  delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> >  create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> 

> Thanks for your effort, Chester.

> 

> > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> > deleted file mode 100644

> > index f1bbe0826be5..000000000000

> > --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> > +++ /dev/null

> > @@ -1,22 +0,0 @@

> > -* Freescale LINFlexD UART

> > -

> > -The LINFlexD controller implements several LIN protocol versions, as well as

> > -support for full-duplex UART communication through 8-bit and 9-bit frames.

> > -

> > -See chapter 47 ("LINFlexD") in the reference manual[1].

> > -

> > -Required properties:

> > -- compatible :

> > -  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which

> > -    is compatible with the one integrated on S32V234 SoC

> > -- reg : Address and length of the register set for the device

> > -- interrupts : Should contain uart interrupt

> > -

> > -Example:

> > -uart0: serial@40053000 {

> > -	compatible = "fsl,s32v234-linflexuart";

> > -	reg = <0x0 0x40053000 0x0 0x1000>;

> > -	interrupts = <0 59 4>;

> > -};

> > -

> > -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM

> > diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> > new file mode 100644

> > index 000000000000..acfe34706ccb

> > --- /dev/null

> > +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> > @@ -0,0 +1,48 @@

> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> 

> Since this is dual-licensed and BSD-2-Clause would seem compatible with

> GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a

> blocker.


There's no license identifier in the original file so it's not a problem to
choose "GPL-2.0-or-later".

> 

> > +%YAML 1.2

> > +---

> > +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#

> > +$schema: http://devicetree.org/meta-schemas/core.yaml#

> > +

> > +title: Freescale LINFlexD UART

> > +

> > +description: |

> > +  The LINFlexD controller implements several LIN protocol versions, as well

> > +  as support for full-duplex UART communication through 8-bit and 9-bit

> > +  frames. See chapter 47 ("LINFlexD") in the reference manual

> > +  https://www.nxp.com/webapp/Download?colCode=S32V234RM.

> > +

> > +maintainers:

> > +  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>

> > +  - Rob Herring <robh@kernel.org>

> 

> @Shawn: I assume we need both of them to ack this (or an S32V maintainer

> to volunteer), since they were not named in the .txt file before?

> 

> > +

> > +allOf:

> > +  - $ref: "serial.yaml"

> > +

> > +properties:

> > +  compatible:

> > +    description: The LINFlexD controller on S32V234 SoC, which can be

> > +      configured in UART mode.

> > +    items:

> > +      - const: fsl,s32v234-linflexuart

> > +

> > +  reg:

> > +    maxItems: 1

> > +

> > +  interrupts:

> > +    maxItems: 1

> > +

> > +required:

> > +  - compatible

> > +  - reg

> > +  - interrupts

> > +

> > +unevaluatedProperties: false

> > +

> > +examples:

> > +  - |

> > +    serial@40053000 {

> > +        compatible = "fsl,s32v234-linflexuart";

> > +        reg = <0x40053000 0x1000>;

> > +        interrupts = <0 59 4>;

> > +    };

> 

> Otherwise looking sane,

> 

> Reviewed-by: Andreas Färber <afaerber@suse.de>

> 

> Thanks,

> Andreas

> 

> -- 

> SUSE Software Solutions Germany GmbH

> Maxfeldstr. 5, 90409 Nürnberg, Germany

> GF: Felix Imendörffer

> HRB 36809 (AG Nürnberg)

>
Krzysztof Kozlowski Aug. 13, 2021, 11:28 a.m. UTC | #3
On 13/08/2021 13:11, Chester Lin wrote:
> Hi Andreas,

> 

> On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote:

>> On 05.08.21 08:54, Chester Lin wrote:

>>> Convert the FSL LINFlexD UART binding to json-schema.

>>>

>>> Signed-off-by: Chester Lin <clin@suse.com>

>>> ---

>>>  .../bindings/serial/fsl,s32-linflexuart.txt   | 22 ---------

>>>  .../bindings/serial/fsl,s32-linflexuart.yaml  | 48 +++++++++++++++++++

>>>  2 files changed, 48 insertions(+), 22 deletions(-)

>>>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

>>>  create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

>>

>> Thanks for your effort, Chester.

>>

>>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

>>> deleted file mode 100644

>>> index f1bbe0826be5..000000000000

>>> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

>>> +++ /dev/null

>>> @@ -1,22 +0,0 @@

>>> -* Freescale LINFlexD UART

>>> -

>>> -The LINFlexD controller implements several LIN protocol versions, as well as

>>> -support for full-duplex UART communication through 8-bit and 9-bit frames.

>>> -

>>> -See chapter 47 ("LINFlexD") in the reference manual[1].

>>> -

>>> -Required properties:

>>> -- compatible :

>>> -  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which

>>> -    is compatible with the one integrated on S32V234 SoC

>>> -- reg : Address and length of the register set for the device

>>> -- interrupts : Should contain uart interrupt

>>> -

>>> -Example:

>>> -uart0: serial@40053000 {

>>> -	compatible = "fsl,s32v234-linflexuart";

>>> -	reg = <0x0 0x40053000 0x0 0x1000>;

>>> -	interrupts = <0 59 4>;

>>> -};

>>> -

>>> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM

>>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

>>> new file mode 100644

>>> index 000000000000..acfe34706ccb

>>> --- /dev/null

>>> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

>>> @@ -0,0 +1,48 @@

>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

>>

>> Since this is dual-licensed and BSD-2-Clause would seem compatible with

>> GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a

>> blocker.

> 

> There's no license identifier in the original file so it's not a problem to

> choose "GPL-2.0-or-later".


That is not entirely correct. If there is no explicit license in the
file, it's kernel's default so GPL-2.0-only. You cannot relicense
derivative work without getting permission from authors and copyright
holders.

However if you did not copy the text/description from original bindings,
your work won't be derivative so you can relicense it.

Best regards,
Krzysztof
Rob Herring (Arm) Aug. 13, 2021, 6:04 p.m. UTC | #4
On Fri, Aug 13, 2021 at 07:43:17PM +0800, Chester Lin wrote:
> On Fri, Aug 13, 2021 at 01:28:40PM +0200, Krzysztof Kozlowski wrote:

> > On 13/08/2021 13:11, Chester Lin wrote:

> > > Hi Andreas,

> > > 

> > > On Thu, Aug 12, 2021 at 06:04:44PM +0200, Andreas Färber wrote:

> > >> On 05.08.21 08:54, Chester Lin wrote:

> > >>> Convert the FSL LINFlexD UART binding to json-schema.

> > >>>

> > >>> Signed-off-by: Chester Lin <clin@suse.com>

> > >>> ---

> > >>>  .../bindings/serial/fsl,s32-linflexuart.txt   | 22 ---------

> > >>>  .../bindings/serial/fsl,s32-linflexuart.yaml  | 48 +++++++++++++++++++

> > >>>  2 files changed, 48 insertions(+), 22 deletions(-)

> > >>>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> > >>>  create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> > >>

> > >> Thanks for your effort, Chester.

> > >>

> > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> > >>> deleted file mode 100644

> > >>> index f1bbe0826be5..000000000000

> > >>> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> > >>> +++ /dev/null

> > >>> @@ -1,22 +0,0 @@

> > >>> -* Freescale LINFlexD UART

> > >>> -

> > >>> -The LINFlexD controller implements several LIN protocol versions, as well as

> > >>> -support for full-duplex UART communication through 8-bit and 9-bit frames.

> > >>> -

> > >>> -See chapter 47 ("LINFlexD") in the reference manual[1].

> > >>> -

> > >>> -Required properties:

> > >>> -- compatible :

> > >>> -  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which

> > >>> -    is compatible with the one integrated on S32V234 SoC

> > >>> -- reg : Address and length of the register set for the device

> > >>> -- interrupts : Should contain uart interrupt

> > >>> -

> > >>> -Example:

> > >>> -uart0: serial@40053000 {

> > >>> -	compatible = "fsl,s32v234-linflexuart";

> > >>> -	reg = <0x0 0x40053000 0x0 0x1000>;

> > >>> -	interrupts = <0 59 4>;

> > >>> -};

> > >>> -

> > >>> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM

> > >>> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> > >>> new file mode 100644

> > >>> index 000000000000..acfe34706ccb

> > >>> --- /dev/null

> > >>> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> > >>> @@ -0,0 +1,48 @@

> > >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> > >>

> > >> Since this is dual-licensed and BSD-2-Clause would seem compatible with

> > >> GPLv3, this could probably be s/GPL-2.0-only/GPL-2.0-or-later/ ? Not a

> > >> blocker.

> > > 

> > > There's no license identifier in the original file so it's not a problem to

> > > choose "GPL-2.0-or-later".

> > 

> > That is not entirely correct. If there is no explicit license in the

> > file, it's kernel's default so GPL-2.0-only. You cannot relicense

> > derivative work without getting permission from authors and copyright

> > holders.

> > 

> > However if you did not copy the text/description from original bindings,

> > your work won't be derivative so you can relicense it.

> > 

> 

> Sorry for my misunderstanding and thanks for the reminder.


TBC, please try and get permission to relicense. The single author was 
from NXP so changing the license here just needs the okay from any NXP 
employee.

But use 'GPL-2.0-only' not 'GPL-2.0-or-later' please. As gregkh says,
are you okay with GPLv4, v5, etc.?

Rob
Rob Herring (Arm) Aug. 13, 2021, 6:07 p.m. UTC | #5
On Thu, Aug 05, 2021 at 02:54:23PM +0800, Chester Lin wrote:
> Convert the FSL LINFlexD UART binding to json-schema.

> 

> Signed-off-by: Chester Lin <clin@suse.com>

> ---

>  .../bindings/serial/fsl,s32-linflexuart.txt   | 22 ---------

>  .../bindings/serial/fsl,s32-linflexuart.yaml  | 48 +++++++++++++++++++

>  2 files changed, 48 insertions(+), 22 deletions(-)

>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

>  create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> 

> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> deleted file mode 100644

> index f1bbe0826be5..000000000000

> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

> +++ /dev/null

> @@ -1,22 +0,0 @@

> -* Freescale LINFlexD UART

> -

> -The LINFlexD controller implements several LIN protocol versions, as well as

> -support for full-duplex UART communication through 8-bit and 9-bit frames.

> -

> -See chapter 47 ("LINFlexD") in the reference manual[1].

> -

> -Required properties:

> -- compatible :

> -  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which

> -    is compatible with the one integrated on S32V234 SoC

> -- reg : Address and length of the register set for the device

> -- interrupts : Should contain uart interrupt

> -

> -Example:

> -uart0: serial@40053000 {

> -	compatible = "fsl,s32v234-linflexuart";

> -	reg = <0x0 0x40053000 0x0 0x1000>;

> -	interrupts = <0 59 4>;

> -};

> -

> -[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM

> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> new file mode 100644

> index 000000000000..acfe34706ccb

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml

> @@ -0,0 +1,48 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: Freescale LINFlexD UART

> +

> +description: |

> +  The LINFlexD controller implements several LIN protocol versions, as well

> +  as support for full-duplex UART communication through 8-bit and 9-bit

> +  frames. See chapter 47 ("LINFlexD") in the reference manual

> +  https://www.nxp.com/webapp/Download?colCode=S32V234RM.

> +

> +maintainers:

> +  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>

> +  - Rob Herring <robh@kernel.org>


Someone that cares about this h/w, not who applies patches.

> +

> +allOf:

> +  - $ref: "serial.yaml"

> +

> +properties:

> +  compatible:

> +    description: The LINFlexD controller on S32V234 SoC, which can be

> +      configured in UART mode.


Drop 'on S32V234 SoC' so we're not editting for every new SoC.

> +    items:

> +      - const: fsl,s32v234-linflexuart

> +

> +  reg:

> +    maxItems: 1

> +

> +  interrupts:

> +    maxItems: 1

> +

> +required:

> +  - compatible

> +  - reg

> +  - interrupts

> +

> +unevaluatedProperties: false

> +

> +examples:

> +  - |

> +    serial@40053000 {

> +        compatible = "fsl,s32v234-linflexuart";

> +        reg = <0x40053000 0x1000>;

> +        interrupts = <0 59 4>;

> +    };

> -- 

> 2.30.0

> 

>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
deleted file mode 100644
index f1bbe0826be5..000000000000
--- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
+++ /dev/null
@@ -1,22 +0,0 @@ 
-* Freescale LINFlexD UART
-
-The LINFlexD controller implements several LIN protocol versions, as well as
-support for full-duplex UART communication through 8-bit and 9-bit frames.
-
-See chapter 47 ("LINFlexD") in the reference manual[1].
-
-Required properties:
-- compatible :
-  - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which
-    is compatible with the one integrated on S32V234 SoC
-- reg : Address and length of the register set for the device
-- interrupts : Should contain uart interrupt
-
-Example:
-uart0: serial@40053000 {
-	compatible = "fsl,s32v234-linflexuart";
-	reg = <0x0 0x40053000 0x0 0x1000>;
-	interrupts = <0 59 4>;
-};
-
-[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
new file mode 100644
index 000000000000..acfe34706ccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -0,0 +1,48 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale LINFlexD UART
+
+description: |
+  The LINFlexD controller implements several LIN protocol versions, as well
+  as support for full-duplex UART communication through 8-bit and 9-bit
+  frames. See chapter 47 ("LINFlexD") in the reference manual
+  https://www.nxp.com/webapp/Download?colCode=S32V234RM.
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+  - Rob Herring <robh@kernel.org>
+
+allOf:
+  - $ref: "serial.yaml"
+
+properties:
+  compatible:
+    description: The LINFlexD controller on S32V234 SoC, which can be
+      configured in UART mode.
+    items:
+      - const: fsl,s32v234-linflexuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial@40053000 {
+        compatible = "fsl,s32v234-linflexuart";
+        reg = <0x40053000 0x1000>;
+        interrupts = <0 59 4>;
+    };