diff mbox series

[RESEND,v3,02/10] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq

Message ID 1638403212-29265-3-git-send-email-quic_fenglinw@quicinc.com
State Superseded
Headers show
Series A bunch of fix and optimization patches in spmi-pmic-arb.c | expand

Commit Message

Fenglin Wu Dec. 2, 2021, midnight UTC
From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>

Currently, cleanup_irq() is invoked when a peripheral's interrupt
fires and there is no mapping present in the interrupt domain of
spmi interrupt controller.

The cleanup_irq clears the arbiter bit, clears the pmic interrupt
and disables it at the pmic in that order. The last disable in
cleanup_irq races with request_irq() in that it stomps over the
enable issued by request_irq. Fix this by not writing to the pmic
in cleanup_irq. The latched bit will be left set in the pmic,
which will not send us more interrupts even if the enable bit
stays enabled.

When a client wants to request an interrupt, use the activate
callback on the irq_domain to clear latched bit. This ensures
that the latched, if set due to the above changes in cleanup_irq
or when the bootloader leaves it set, gets cleaned up, paving way
for upcoming interrupts to trigger.

With this, there is a possibility of unwanted triggering of
interrupt right after the latched bit is cleared - the interrupt
may be left enabled too. To avoid that, clear the enable first
followed by clearing the latched bit in the activate callback.

Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
[collinsd@codeaurora.org: fix merge conflict]
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

Comments

Bryan O'Donoghue Dec. 2, 2021, 2:39 a.m. UTC | #1
On 02/12/2021 00:00, Fenglin Wu wrote:
> From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
> 
> Currently, cleanup_irq() is invoked when a peripheral's interrupt
> fires and there is no mapping present in the interrupt domain of
> spmi interrupt controller.
> 
> The cleanup_irq clears the arbiter bit, clears the pmic interrupt
> and disables it at the pmic in that order. The last disable in
> cleanup_irq races with request_irq() in that it stomps over the
> enable issued by request_irq. Fix this by not writing to the pmic
> in cleanup_irq. The latched bit will be left set in the pmic,
> which will not send us more interrupts even if the enable bit
> stays enabled.
> 
> When a client wants to request an interrupt, use the activate
> callback on the irq_domain to clear latched bit. This ensures
> that the latched, if set due to the above changes in cleanup_irq
> or when the bootloader leaves it set, gets cleaned up, paving way
> for upcoming interrupts to trigger.
> 
> With this, there is a possibility of unwanted triggering of
> interrupt right after the latched bit is cleared - the interrupt
> may be left enabled too. To avoid that, clear the enable first
> followed by clearing the latched bit in the activate callback.
> 
> Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
> [collinsd@codeaurora.org: fix merge conflict]
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
>   drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
>   1 file changed, 5 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index da629cc..ce7ae99 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -492,16 +492,6 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
>   	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
>   			__func__, apid, sid, per, id);
>   	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
> -
> -	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
> -			(per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
> -		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
> -				irq_mask, ppid);spmi: pmic-arb: cleanup unrequested irqs
> -
> -	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
> -			       (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
> -		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
> -				irq_mask, ppid);
>   }
>   
>   static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
> @@ -674,6 +664,7 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
>   	u16 apid = hwirq_to_apid(d->hwirq);
>   	u16 sid = hwirq_to_sid(d->hwirq);
>   	u16 irq = hwirq_to_irq(d->hwirq);
> +	u8 buf;
>   
>   	if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
>   		dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
> @@ -682,6 +673,10 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
>   		return -ENODEV;
>   	}
>   
> +	buf = BIT(irq);
> +	qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
> +	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
> +
>   	return 0;
>   }
>   
> 

Shouldn't this have a

Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and 
other cleanup")

so we know to backport as necessary

---
bod
Fenglin Wu Dec. 2, 2021, 12:52 p.m. UTC | #2
On 2021/12/2 10:39, Bryan O'Donoghue wrote:
> On 02/12/2021 00:00, Fenglin Wu wrote:
>> From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
>>
>> Currently, cleanup_irq() is invoked when a peripheral's interrupt
>> fires and there is no mapping present in the interrupt domain of
>> spmi interrupt controller.
>>
>> The cleanup_irq clears the arbiter bit, clears the pmic interrupt
>> and disables it at the pmic in that order. The last disable in
>> cleanup_irq races with request_irq() in that it stomps over the
>> enable issued by request_irq. Fix this by not writing to the pmic
>> in cleanup_irq. The latched bit will be left set in the pmic,
>> which will not send us more interrupts even if the enable bit
>> stays enabled.
>>
>> When a client wants to request an interrupt, use the activate
>> callback on the irq_domain to clear latched bit. This ensures
>> that the latched, if set due to the above changes in cleanup_irq
>> or when the bootloader leaves it set, gets cleaned up, paving way
>> for upcoming interrupts to trigger.
>>
>> With this, there is a possibility of unwanted triggering of
>> interrupt right after the latched bit is cleared - the interrupt
>> may be left enabled too. To avoid that, clear the enable first
>> followed by clearing the latched bit in the activate callback.
>>
>> Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
>> [collinsd@codeaurora.org: fix merge conflict]
>> Signed-off-by: David Collins <collinsd@codeaurora.org>
>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>> ---
>>   drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
>>   1 file changed, 5 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
>> index da629cc..ce7ae99 100644
>> --- a/drivers/spmi/spmi-pmic-arb.c
>> +++ b/drivers/spmi/spmi-pmic-arb.c
>> @@ -492,16 +492,6 @@ static void cleanup_irq(struct spmi_pmic_arb 
>> *pmic_arb, u16 apid, int id)
>>       dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x 
>> per=0x%x irq=%d\n",
>>               __func__, apid, sid, per, id);
>>       writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, 
>> apid));
>> -
>> -    if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
>> -            (per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
>> -        dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack 
>> irq_mask = 0x%x for ppid = %x\n",
>> -                irq_mask, ppid);spmi: pmic-arb: cleanup unrequested 
>> irqs
>> -
>> -    if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
>> -                   (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
>> -        dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack 
>> irq_mask = 0x%x for ppid = %x\n",
>> -                irq_mask, ppid);
>>   }
>>     static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 
>> apid)
>> @@ -674,6 +664,7 @@ static int qpnpint_irq_domain_activate(struct 
>> irq_domain *domain,
>>       u16 apid = hwirq_to_apid(d->hwirq);
>>       u16 sid = hwirq_to_sid(d->hwirq);
>>       u16 irq = hwirq_to_irq(d->hwirq);
>> +    u8 buf;
>>         if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
>>           dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, 
>> periph = %#x, irq = %u: ee=%u but owner=%u\n",
>> @@ -682,6 +673,10 @@ static int qpnpint_irq_domain_activate(struct 
>> irq_domain *domain,
>>           return -ENODEV;
>>       }
>>   +    buf = BIT(irq);
>> +    qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
>> +    qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
>> +
>>       return 0;
>>   }
>>
>
> Shouldn't this have a
>
> Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
> Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and 
> other cleanup")
>
> so we know to backport as necessary
>
Got it, I will add the Fixes tag and send it again.

> ---
> bod
>
diff mbox series

Patch

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index da629cc..ce7ae99 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -492,16 +492,6 @@  static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
 			__func__, apid, sid, per, id);
 	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			(per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			       (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
 }
 
 static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
@@ -674,6 +664,7 @@  static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 	u16 apid = hwirq_to_apid(d->hwirq);
 	u16 sid = hwirq_to_sid(d->hwirq);
 	u16 irq = hwirq_to_irq(d->hwirq);
+	u8 buf;
 
 	if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
 		dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
@@ -682,6 +673,10 @@  static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 		return -ENODEV;
 	}
 
+	buf = BIT(irq);
+	qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
+	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
+
 	return 0;
 }