diff mbox series

[v3,1/4] Watchdog: sp5100_tco: Move timer initialization into function

Message ID 20220118202234.410555-2-terry.bowman@amd.com
State Superseded
Headers show
Series [v3,1/4] Watchdog: sp5100_tco: Move timer initialization into function | expand

Commit Message

Terry Bowman Jan. 18, 2022, 8:22 p.m. UTC
Refactor driver's timer initialization into new function. This is needed
inorder to support adding new device layouts while using common timer
initialization.

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
To: Guenter Roeck <linux@roeck-us.net>
To: linux-watchdog@vger.kernel.org
To: Jean Delvare <jdelvare@suse.com>
To: linux-i2c@vger.kernel.org
To: Wolfram Sang <wsa@kernel.org>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
---
 drivers/watchdog/sp5100_tco.c | 65 +++++++++++++++++++----------------
 1 file changed, 36 insertions(+), 29 deletions(-)

Comments

Jean Delvare Jan. 25, 2022, 1:05 p.m. UTC | #1
On Tue, 18 Jan 2022 14:22:31 -0600, Terry Bowman wrote:
> Refactor driver's timer initialization into new function. This is needed
> inorder to support adding new device layouts while using common timer
> initialization.
> 
> Co-developed-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> To: Guenter Roeck <linux@roeck-us.net>
> To: linux-watchdog@vger.kernel.org
> To: Jean Delvare <jdelvare@suse.com>
> To: linux-i2c@vger.kernel.org
> To: Wolfram Sang <wsa@kernel.org>
> To: Andy Shevchenko <andy.shevchenko@gmail.com>
> To: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Cc: linux-kernel@vger.kernel.org
> Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
> Cc: Robert Richter <rrichter@amd.com>
> Cc: Thomas Lendacky <thomas.lendacky@amd.com>
> ---
>  drivers/watchdog/sp5100_tco.c | 65 +++++++++++++++++++----------------
>  1 file changed, 36 insertions(+), 29 deletions(-)
> (...)

Except for the issues already mentioned by Andy, looks good to me.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
diff mbox series

Patch

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index dd9a744f82f8..ecc273b9b17f 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -223,6 +223,41 @@  static u32 sp5100_tco_read_pm_reg32(u8 index)
 	return val;
 }
 
+static int sp5100_tco_timer_init(struct sp5100_tco *tco)
+{
+	struct watchdog_device *wdd = &tco->wdd;
+	struct device *dev = wdd->parent;
+	u32 val;
+
+	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+	if (val & SP5100_WDT_DISABLED) {
+		dev_err(dev, "Watchdog hardware is disabled\n");
+		return(-ENODEV);
+	}
+
+	/*
+	 * Save WatchDogFired status, because WatchDogFired flag is
+	 * cleared here.
+	 */
+	if (val & SP5100_WDT_FIRED)
+		wdd->bootstatus = WDIOF_CARDRESET;
+
+	/* Set watchdog action to reset the system */
+	val &= ~SP5100_WDT_ACTION_RESET;
+	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+	/* Set a reasonable heartbeat before we stop the timer */
+	tco_timer_set_timeout(wdd, wdd->timeout);
+
+	/*
+	 * Stop the TCO before we change anything so we don't race with
+	 * a zeroed timer.
+	 */
+	tco_timer_stop(wdd);
+
+	return 0;
+}
+
 static int sp5100_tco_setupdevice(struct device *dev,
 				  struct watchdog_device *wdd)
 {
@@ -348,35 +383,7 @@  static int sp5100_tco_setupdevice(struct device *dev,
 	/* Setup the watchdog timer */
 	tco_timer_enable(tco);
 
-	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
-	if (val & SP5100_WDT_DISABLED) {
-		dev_err(dev, "Watchdog hardware is disabled\n");
-		ret = -ENODEV;
-		goto unreg_region;
-	}
-
-	/*
-	 * Save WatchDogFired status, because WatchDogFired flag is
-	 * cleared here.
-	 */
-	if (val & SP5100_WDT_FIRED)
-		wdd->bootstatus = WDIOF_CARDRESET;
-	/* Set watchdog action to reset the system */
-	val &= ~SP5100_WDT_ACTION_RESET;
-	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
-
-	/* Set a reasonable heartbeat before we stop the timer */
-	tco_timer_set_timeout(wdd, wdd->timeout);
-
-	/*
-	 * Stop the TCO before we change anything so we don't race with
-	 * a zeroed timer.
-	 */
-	tco_timer_stop(wdd);
-
-	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
-
-	return 0;
+	ret = sp5100_tco_timer_init(tco);
 
 unreg_region:
 	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);