diff mbox series

[v10,14/21] drm/mediatek: dpi: Add dpintf support

Message ID 20220523104758.29531-15-granquet@baylibre.com
State New
Headers show
Series drm/mediatek: Add mt8195 DisplayPort driver | expand

Commit Message

Guillaume Ranquet May 23, 2022, 10:47 a.m. UTC
dpintf is the displayport interface hardware unit. This unit is similar
to dpi and can reuse most of the code.

This patch adds support for mt8195-dpintf to this dpi driver. Main
differences are:
 - Some features/functional components are not available for dpintf
   which are now excluded from code execution once is_dpintf is set
 - dpintf can and needs to choose between different clockdividers based
   on the clockspeed. This is done by choosing a different clock parent.
 - There are two additional clocks that need to be managed. These are
   only set for dpintf and will be set to NULL if not supplied. The
   clk_* calls handle these as normal clocks then.
 - Some register contents differ slightly between the two components. To
   work around this I added register bits/masks with a DPINTF_ prefix
   and use them where different.

Based on a separate driver for dpintf created by
Jason-JH.Lin <jason-jh.lin@mediatek.com>.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c          | 126 +++++++++++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  35 ++++++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   8 ++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   5 +-
 include/linux/soc/mediatek/mtk-mmsys.h      |   4 +-
 6 files changed, 159 insertions(+), 20 deletions(-)

Comments

AngeloGioacchino Del Regno May 25, 2022, 12:58 p.m. UTC | #1
Il 23/05/22 12:47, Guillaume Ranquet ha scritto:
> dpintf is the displayport interface hardware unit. This unit is similar
> to dpi and can reuse most of the code.
> 
> This patch adds support for mt8195-dpintf to this dpi driver. Main
> differences are:
>   - Some features/functional components are not available for dpintf
>     which are now excluded from code execution once is_dpintf is set
>   - dpintf can and needs to choose between different clockdividers based
>     on the clockspeed. This is done by choosing a different clock parent.
>   - There are two additional clocks that need to be managed. These are
>     only set for dpintf and will be set to NULL if not supplied. The
>     clk_* calls handle these as normal clocks then.
>   - Some register contents differ slightly between the two components. To
>     work around this I added register bits/masks with a DPINTF_ prefix
>     and use them where different.
> 
> Based on a separate driver for dpintf created by
> Jason-JH.Lin <jason-jh.lin@mediatek.com>.
> 

Only after finishing the review, I've noticed that I just wrote the same things
that I wrote in my review for version 8... and if I recall correctly, this is not
the first time that something like that happens.

Please pay attention to what reviewers say, as to not waste anyone's time.


> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> ---
>   drivers/gpu/drm/mediatek/mtk_dpi.c          | 126 +++++++++++++++++---
>   drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  35 ++++++
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   8 ++
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
>   drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   5 +-
>   include/linux/soc/mediatek/mtk-mmsys.h      |   4 +-
>   6 files changed, 159 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index eb969c5c5c2e..763bfb700135 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -71,6 +71,7 @@ struct mtk_dpi {
>   	void __iomem *regs;
>   	struct device *dev;
>   	struct clk *engine_clk;
> +	struct clk *dpi_ck_cg;
>   	struct clk *pixel_clk;
>   	struct clk *tvd_clk;
>   	int irq;
> @@ -126,6 +127,7 @@ struct mtk_dpi_conf {
>   	const u32 *output_fmts;
>   	u32 num_output_fmts;
>   	bool is_ck_de_pol;
> +	bool is_dpintf;
>   	bool swap_input_support;
>   	/* Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH (no shift) */
>   	u32 dimension_mask;
> @@ -438,6 +440,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
>   	mtk_dpi_disable(dpi);
>   	clk_disable_unprepare(dpi->pixel_clk);
>   	clk_disable_unprepare(dpi->engine_clk);
> +	clk_disable_unprepare(dpi->dpi_ck_cg);
> +	clk_disable_unprepare(dpi->tvd_clk);
>   }
>   
>   static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> @@ -447,12 +451,24 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
>   	if (++dpi->refcount != 1)
>   		return 0;
>   
> +	ret = clk_prepare_enable(dpi->tvd_clk);
> +	if (ret) {
> +		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
> +		goto err_pixel;
> +	}
> +
>   	ret = clk_prepare_enable(dpi->engine_clk);
>   	if (ret) {
>   		dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
>   		goto err_refcount;
>   	}
>   
> +	ret = clk_prepare_enable(dpi->dpi_ck_cg);
> +	if (ret) {
> +		dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock: %d\n", ret);
> +		goto err_ck_cg;
> +	}
> +
>   	ret = clk_prepare_enable(dpi->pixel_clk);
>   	if (ret) {
>   		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
> @@ -466,6 +482,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
>   	return 0;
>   
>   err_pixel:
> +	clk_disable_unprepare(dpi->dpi_ck_cg);
> +err_ck_cg:
>   	clk_disable_unprepare(dpi->engine_clk);
>   err_refcount:
>   	dpi->refcount--;
> @@ -498,11 +516,11 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>   
>   	vm.pixelclock = pll_rate / factor;
>   	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
> -	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
> +		 (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {

The indentation was perfect before that change...

>   		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
> -	else
> +	} else {
>   		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
> -
> +	}
>   
>   	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
>   
> @@ -515,9 +533,15 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>   			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
>   	dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
>   			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
> -	hsync.sync_width = vm.hsync_len;
> -	hsync.back_porch = vm.hback_porch;
> -	hsync.front_porch = vm.hfront_porch;
> +	if (dpi->conf->is_dpintf) {
> +		hsync.sync_width = vm.hsync_len / 4;
> +		hsync.back_porch = vm.hback_porch / 4;
> +		hsync.front_porch = vm.hfront_porch / 4;
> +	} else {
> +		hsync.sync_width = vm.hsync_len;
> +		hsync.back_porch = vm.hback_porch;
> +		hsync.front_porch = vm.hfront_porch;
> +	}

This looks way better:

	hsync.sync_width = vm.hsync_len;
	hsync.back_porch = vm.hback_porch;
	hsync.front_porch = vm.hfront_porch;

	/* For DPINTF, we need to divide everything by 4 .. lanes? */
	if (dpi->conf->is_dpintf) {
		hsync.sync_width /= 4;
		hsync.back_porch /= 4;
		hsync.front_porch /= 4;
	}

>   	hsync.shift_half_line = false;
>   	vsync_lodd.sync_width = vm.vsync_len;
>   	vsync_lodd.back_porch = vm.vback_porch;
> @@ -559,13 +583,20 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>   	mtk_dpi_config_channel_limit(dpi);
>   	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
>   	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
> -	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
>   	mtk_dpi_config_color_format(dpi, dpi->color_format);
> -	mtk_dpi_config_2n_h_fre(dpi);
> -	mtk_dpi_dual_edge(dpi);
> -	mtk_dpi_config_disable_edge(dpi);
> +	if (dpi->conf->is_dpintf) {
> +		mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
> +			     DPINTF_INPUT_2P_EN);
> +	} else {
> +		mtk_dpi_config_yc_map(dpi, dpi->yc_map);
> +		mtk_dpi_config_2n_h_fre(dpi);
> +		mtk_dpi_dual_edge(dpi);
> +		mtk_dpi_config_disable_edge(dpi);
> +	}
>   	mtk_dpi_sw_reset(dpi, false);
>   
> +	mtk_dpi_enable(dpi);
> +
>   	return 0;
>   }
>   
> @@ -608,7 +639,6 @@ static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
>   	u32 *input_fmts;
>   
>   	*num_input_fmts = 0;
> -

Removing this line is not part of adding dpintf support, so don't do that.

>   	input_fmts = kcalloc(1, sizeof(*input_fmts),
>   			     GFP_KERNEL);
>   	if (!input_fmts)
> @@ -634,15 +664,18 @@ static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
>   		if (dpi->conf->num_output_fmts)
>   			out_bus_format = dpi->conf->output_fmts[0];
>   
> -	dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> -		bridge_state->input_bus_cfg.format,
> -		bridge_state->output_bus_cfg.format);
> +	dev_info(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> +		 bridge_state->input_bus_cfg.format,
> +		 bridge_state->output_bus_cfg.format);

This message is not giving any constantly changing information, nor any one that
is interesting for the user: keep this as dev_dbg().

>   
>   	dpi->output_fmt = out_bus_format;
>   	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
>   	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
>   	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> -	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> +	if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> +		dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;
> +	else
> +		dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
>   
>   	return 0;
>   }
> @@ -687,7 +720,7 @@ mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
>   {
>   	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>   
> -	if (mode->clock > dpi->conf->max_clock_khz)
> +	if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
>   		return MODE_CLOCK_HIGH;
>   
>   	return MODE_OK;
> @@ -801,6 +834,16 @@ static unsigned int mt8183_calculate_factor(int clock)
>   		return 2;
>   }
>   
> +static unsigned int mt8195_dpintf_calculate_factor(int clock)
> +{
> +	if (clock < 70000)

is 70000 intentional? Or did you mean 700000?

> +		return 4;
> +	else if (clock < 200000)
> +		return 2;
> +	else
> +		return 1;
> +}
> +
>   static const u32 mt8173_output_fmts[] = {
>   	MEDIA_BUS_FMT_RGB888_1X24,
>   };
> @@ -810,6 +853,12 @@ static const u32 mt8183_output_fmts[] = {
>   	MEDIA_BUS_FMT_RGB888_2X12_BE,
>   };
>   
> +static const u32 mt8195_output_fmts[] = {
> +	MEDIA_BUS_FMT_RGB888_1X24,
> +	MEDIA_BUS_FMT_YUV8_1X24,
> +	MEDIA_BUS_FMT_YUYV8_1X16,
> +};
> +
>   static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
>   	.c_bottom = 0x0010,
>   	.c_top = 0x0FE0,
> @@ -817,6 +866,13 @@ static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
>   	.y_top = 0x0FE0,
>   };
>   
> +static const struct mtk_dpi_yc_limit mtk_dpintf_limit = {
> +	.c_bottom = 0x0000,
> +	.c_top = 0xFFF,
> +	.y_bottom = 0x0000,
> +	.y_top = 0xFFF,
> +};
> +
>   static const struct mtk_dpi_conf mt8173_conf = {
>   	.cal_factor = mt8173_calculate_factor,
>   	.reg_h_fre_con = 0xe0,
> @@ -882,6 +938,19 @@ static const struct mtk_dpi_conf mt8192_conf = {
>   	.limit = &mtk_dpi_limit,
>   };
>   
> +static const struct mtk_dpi_conf mt8195_dpintf_conf = {
> +	.cal_factor = mt8195_dpintf_calculate_factor,
> +	.output_fmts = mt8195_output_fmts,
> +	.num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
> +	.is_dpintf = true,
> +	.dimension_mask = DPINTF_HPW_MASK,
> +	.hvsize_mask = DPINTF_HSIZE_MASK,
> +	.channel_swap_shift = DPINTF_CH_SWAP,
> +	.yuv422_en_bit = DPINTF_YUV422_EN,
> +	.csc_enable_bit = DPINTF_CSC_ENABLE,
> +	.limit = &mtk_dpintf_limit,
> +};
> +
>   static int mtk_dpi_probe(struct platform_device *pdev)
>   {
>   	struct device *dev = &pdev->dev;
> @@ -929,7 +998,27 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>   	if (IS_ERR(dpi->engine_clk)) {
>   		ret = PTR_ERR(dpi->engine_clk);
>   		if (ret != -EPROBE_DEFER)
> -			dev_err(dev, "Failed to get engine clock: %d\n", ret);
> +			dev_err(dev, "Failed to get engine clock: %d\n",
> +				ret);

Why are you breaking this line?

> +
> +		return ret;
> +	}
> +
> +	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
> +	if (IS_ERR(dpi->dpi_ck_cg)) {
> +		ret = PTR_ERR(dpi->dpi_ck_cg);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get dpi ck cg clock: %d\n",
> +				ret);
> +
> +		return ret;
> +	}
> +

You're getting this clock twice, what happened here?

P.S.: As I explained on the dt-bindings patch, you likely don't even need this
       clock at all.

> +	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
> +	if (IS_ERR(dpi->dpi_ck_cg)) {
> +		ret = PTR_ERR(dpi->dpi_ck_cg);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get dpi ck cg clock: %d\n", ret);
>   
>   		return ret;
>   	}
> @@ -1004,6 +1093,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
>   	{ .compatible = "mediatek,mt8192-dpi",
>   	  .data = &mt8192_conf,
>   	},
> +	{ .compatible = "mediatek,mt8195-dpintf",
> +	  .data = &mt8195_dpintf_conf,
> +	},
>   	{ },
>   };
>   MODULE_DEVICE_TABLE(of, mtk_dpi_of_ids);
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 3a02fabe1662..dd47dd3f2e4f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -40,10 +40,15 @@
>   #define FAKE_DE_LEVEN			BIT(21)
>   #define FAKE_DE_RODD			BIT(22)
>   #define FAKE_DE_REVEN			BIT(23)
> +#define DPINTF_YUV422_EN		BIT(24)
> +#define DPINTF_CSC_ENABLE		BIT(26)
> +#define DPINTF_INPUT_2P_EN		BIT(29)
>   
>   #define DPI_OUTPUT_SETTING	0x14
>   #define CH_SWAP				0
> +#define DPINTF_CH_SWAP			BIT(1)
>   #define CH_SWAP_MASK			(0x7 << 0)
> +#define DPINTF_CH_SWAP_MASK		(0x7 << 1)
>   #define SWAP_RGB			0x00
>   #define SWAP_GBR			0x01
>   #define SWAP_BRG			0x02
> @@ -80,8 +85,10 @@
>   #define DPI_SIZE		0x18
>   #define HSIZE				0
>   #define HSIZE_MASK			(0x1FFF << 0)
> +#define DPINTF_HSIZE_MASK		(0xFFFF << 0)
>   #define VSIZE				16
>   #define VSIZE_MASK			(0x1FFF << 16)
> +#define DPINTF_VSIZE_MASK		(0xFFFF << 16)
>   
>   #define DPI_DDR_SETTING		0x1C
>   #define DDR_EN				BIT(0)
> @@ -93,24 +100,30 @@
>   #define DPI_TGEN_HWIDTH		0x20
>   #define HPW				0
>   #define HPW_MASK			(0xFFF << 0)
> +#define DPINTF_HPW_MASK			(0xFFFF << 0)
>   
>   #define DPI_TGEN_HPORCH		0x24
>   #define HBP				0
>   #define HBP_MASK			(0xFFF << 0)
> +#define DPINTF_HBP_MASK			(0xFFFF << 0)
>   #define HFP				16
>   #define HFP_MASK			(0xFFF << 16)
> +#define DPINTF_HFP_MASK			(0xFFFF << 16)
>   
>   #define DPI_TGEN_VWIDTH		0x28
>   #define DPI_TGEN_VPORCH		0x2C
>   
>   #define VSYNC_WIDTH_SHIFT		0
>   #define VSYNC_WIDTH_MASK		(0xFFF << 0)
> +#define DPINTF_VSYNC_WIDTH_MASK		(0xFFFF << 0)
>   #define VSYNC_HALF_LINE_SHIFT		16
>   #define VSYNC_HALF_LINE_MASK		BIT(16)
>   #define VSYNC_BACK_PORCH_SHIFT		0
>   #define VSYNC_BACK_PORCH_MASK		(0xFFF << 0)
> +#define DPINTF_VSYNC_BACK_PORCH_MASK	(0xFFFF << 0)
>   #define VSYNC_FRONT_PORCH_SHIFT		16
>   #define VSYNC_FRONT_PORCH_MASK		(0xFFF << 16)
> +#define DPINTF_VSYNC_FRONT_PORCH_MASK	(0xFFFF << 16)
>   
>   #define DPI_BG_HCNTL		0x30
>   #define BG_RIGHT			(0x1FFF << 0)
> @@ -217,4 +230,26 @@
>   
>   #define EDGE_SEL_EN			BIT(5)
>   #define H_FRE_2N			BIT(25)
> +
> +#define RGB_TO_JPEG			0x00

This is 0x0

> +#define RGB_TO_FULL709			0x01

0x1

> +#define RGB_TO_BT601			0x02

0x2

...remove the unnecessary leading zeros, but... you're not ever
using this set of definitions, so why are you even adding them?

> +#define RGB_TO_BT709			0x03
> +#define JPEG_TO_RGB			0x04
> +#define FULL709_TO_RGB			0x05
> +#define BT601_TO_RGB			0x06
> +#define BT709_TO_RGB			0x07
> +#define JPEG_TO_BT601			0x08
> +#define JPEG_TO_BT709			0x09
> +#define BT601_TO_JPEG			0xA
> +#define BT709_TO_JPEG			0xB
> +#define BT709_TO_BT601			0xC
> +#define BT601_TO_BT709			0xD
> +#define JPEG_TO_CERGB			0x14
> +#define FULL709_TO_CERGB		0x15
> +#define BT601_TO_CERGB			0x16
> +#define BT709_TO_CERGB			0x17
> +#define RGB_TO_CERGB			0x1C
> +#define MATRIX_BIT			BIT(8)
> +#define EXT_MATRIX_EN			BIT(12)
>   #endif /* __MTK_DPI_REGS_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 245d0074e12d..3738665a712e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -419,6 +419,11 @@ static const char * const mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] = {
>   	[MTK_DISP_WDMA] = "wdma",
>   	[MTK_DPI] = "dpi",
>   	[MTK_DSI] = "dsi",
> +	[MTK_DP_INTF] = "dp-intf",
> +	[MTK_DISP_PWM] = "pwm",
> +	[MTK_DISP_MUTEX] = "mutex",
> +	[MTK_DISP_OD] = "od",
> +	[MTK_DISP_BLS] = "bls",

Please keep alphabetic order.

>   };
>   
>   struct mtk_ddp_comp_match {
> @@ -439,6 +444,8 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
>   	[DDP_COMPONENT_DPI1]		= { MTK_DPI,			1, &ddp_dpi },
>   	[DDP_COMPONENT_DSC0]		= { MTK_DISP_DSC,		0, &ddp_dsc },
>   	[DDP_COMPONENT_DSC1]		= { MTK_DISP_DSC,		1, &ddp_dsc },
> +	[DDP_COMPONENT_DP_INTF0]	= { MTK_DP_INTF,	0, &ddp_dpi },
> +	[DDP_COMPONENT_DP_INTF1]	= { MTK_DP_INTF,	1, &ddp_dpi },

Indentation issue. Fix it.

>   	[DDP_COMPONENT_DSI0]		= { MTK_DSI,			0, &ddp_dsi },
>   	[DDP_COMPONENT_DSI1]		= { MTK_DSI,			1, &ddp_dsi },
>   	[DDP_COMPONENT_DSI2]		= { MTK_DSI,			2, &ddp_dsi },
> @@ -565,6 +572,7 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
>   	    type == MTK_DISP_PWM ||
>   	    type == MTK_DISP_RDMA ||
>   	    type == MTK_DPI ||
> +	    type == MTK_DP_INTF ||
>   	    type == MTK_DSI)
>   		return 0;
>   
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index 825d763d2378..c4e683f46a95 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -37,6 +37,7 @@ enum mtk_ddp_comp_type {
>   	MTK_DISP_UFOE,
>   	MTK_DISP_WDMA,
>   	MTK_DPI,
> +	MTK_DP_INTF,
>   	MTK_DSI,
>   	MTK_DDP_COMP_TYPE_MAX,
>   };
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index a2a783fc580e..e25ac61aac08 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -690,6 +690,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
>   	  .data = (void *)MTK_DPI },
>   	{ .compatible = "mediatek,mt8183-dpi",
>   	  .data = (void *)MTK_DPI },
> +	{ .compatible = "mediatek,mt8195-dpintf",
> +	  .data = (void *)MTK_DP_INTF },
>   	{ .compatible = "mediatek,mt2701-dsi",
>   	  .data = (void *)MTK_DSI },
>   	{ .compatible = "mediatek,mt8173-dsi",
> @@ -801,8 +803,9 @@ static int mtk_drm_probe(struct platform_device *pdev)
>   		    comp_type == MTK_DISP_OVL_2L ||
>   		    comp_type == MTK_DISP_OVL_ADAPTOR ||
>   		    comp_type == MTK_DISP_RDMA ||
> +		    comp_type == MTK_DSI ||
>   		    comp_type == MTK_DPI ||
> -		    comp_type == MTK_DSI) {
> +		    comp_type == MTK_DP_INTF) {

These were nice and alphabetically ordered, why are you moving MTK_DSI up there?!

  		    comp_type == MTK_DISP_RDMA ||
		    comp_type == MTK_DP_INTF ||
  		    comp_type == MTK_DPI ||
		    comp_type == MTK_DSI) {

... that's how it should look like.

>   			dev_info(dev, "Adding component match for %pOF\n",
>   				 node);
>   			drm_of_component_match_add(dev, &match, component_compare_of,
> diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
> index 3e998bfb795a..e4b84c347201 100644
> --- a/include/linux/soc/mediatek/mtk-mmsys.h
> +++ b/include/linux/soc/mediatek/mtk-mmsys.h
> @@ -21,12 +21,12 @@ enum mtk_ddp_comp_id {
>   	DDP_COMPONENT_COLOR0,
>   	DDP_COMPONENT_COLOR1,
>   	DDP_COMPONENT_DITHER,
> -	DDP_COMPONENT_DP_INTF0,
> -	DDP_COMPONENT_DP_INTF1,
>   	DDP_COMPONENT_DPI0,
>   	DDP_COMPONENT_DPI1,
>   	DDP_COMPONENT_DSC0,
>   	DDP_COMPONENT_DSC1,
> +	DDP_COMPONENT_DP_INTF0,
> +	DDP_COMPONENT_DP_INTF1,

Why are you moving this?!

>   	DDP_COMPONENT_DSI0,
>   	DDP_COMPONENT_DSI1,
>   	DDP_COMPONENT_DSI2,
Christophe JAILLET June 2, 2022, 5:48 a.m. UTC | #2
Le 23/05/2022 à 12:47, Guillaume Ranquet a écrit :
> dpintf is the displayport interface hardware unit. This unit is similar
> to dpi and can reuse most of the code.
> 
> This patch adds support for mt8195-dpintf to this dpi driver. Main
> differences are:
>   - Some features/functional components are not available for dpintf
>     which are now excluded from code execution once is_dpintf is set
>   - dpintf can and needs to choose between different clockdividers based
>     on the clockspeed. This is done by choosing a different clock parent.
>   - There are two additional clocks that need to be managed. These are
>     only set for dpintf and will be set to NULL if not supplied. The
>     clk_* calls handle these as normal clocks then.
>   - Some register contents differ slightly between the two components. To
>     work around this I added register bits/masks with a DPINTF_ prefix
>     and use them where different.
> 
> Based on a separate driver for dpintf created by
> Jason-JH.Lin <jason-jh.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> Signed-off-by: Guillaume Ranquet <granquet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>   drivers/gpu/drm/mediatek/mtk_dpi.c          | 126 +++++++++++++++++---
>   drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  35 ++++++
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   8 ++
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
>   drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   5 +-
>   include/linux/soc/mediatek/mtk-mmsys.h      |   4 +-
>   6 files changed, 159 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index eb969c5c5c2e..763bfb700135 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -71,6 +71,7 @@ struct mtk_dpi {
>   	void __iomem *regs;
>   	struct device *dev;
>   	struct clk *engine_clk;
> +	struct clk *dpi_ck_cg;
>   	struct clk *pixel_clk;
>   	struct clk *tvd_clk;
>   	int irq;
> @@ -126,6 +127,7 @@ struct mtk_dpi_conf {
>   	const u32 *output_fmts;
>   	u32 num_output_fmts;
>   	bool is_ck_de_pol;
> +	bool is_dpintf;
>   	bool swap_input_support;
>   	/* Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH (no shift) */
>   	u32 dimension_mask;
> @@ -438,6 +440,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
>   	mtk_dpi_disable(dpi);
>   	clk_disable_unprepare(dpi->pixel_clk);
>   	clk_disable_unprepare(dpi->engine_clk);
> +	clk_disable_unprepare(dpi->dpi_ck_cg);
> +	clk_disable_unprepare(dpi->tvd_clk);
>   }
>   
>   static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> @@ -447,12 +451,24 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
>   	if (++dpi->refcount != 1)
>   		return 0;
>   

Hi,

belwo the error handling path looks odd. (both where we goto, and the 
order of the clk_disable_unprepare() in the error handling path.

just my 2c,

CJ

> +	ret = clk_prepare_enable(dpi->tvd_clk);
> +	if (ret) {
> +		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
> +		goto err_pixel;
> +	}
> +
>   	ret = clk_prepare_enable(dpi->engine_clk);
>   	if (ret) {
>   		dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
>   		goto err_refcount;
>   	}
>   
> +	ret = clk_prepare_enable(dpi->dpi_ck_cg);
> +	if (ret) {
> +		dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock: %d\n", ret);
> +		goto err_ck_cg;
> +	}
> +
>   	ret = clk_prepare_enable(dpi->pixel_clk);
>   	if (ret) {
>   		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
> @@ -466,6 +482,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
>   	return 0;
>   
>   err_pixel:
> +	clk_disable_unprepare(dpi->dpi_ck_cg);
> +err_ck_cg:
>   	clk_disable_unprepare(dpi->engine_clk);
>   err_refcount:
>   	dpi->refcount--;

[...]
Rex-BC Chen (陳柏辰) June 13, 2022, 6:05 a.m. UTC | #3
On Thu, 2022-06-02 at 07:48 +0200, Christophe JAILLET wrote:
> Le 23/05/2022 à 12:47, Guillaume Ranquet a écrit :
> > dpintf is the displayport interface hardware unit. This unit is
> > similar
> > to dpi and can reuse most of the code.
> > 
> > This patch adds support for mt8195-dpintf to this dpi driver. Main
> > differences are:
> >   - Some features/functional components are not available for
> > dpintf
> >     which are now excluded from code execution once is_dpintf is
> > set
> >   - dpintf can and needs to choose between different clockdividers
> > based
> >     on the clockspeed. This is done by choosing a different clock
> > parent.
> >   - There are two additional clocks that need to be managed. These
> > are
> >     only set for dpintf and will be set to NULL if not supplied.
> > The
> >     clk_* calls handle these as normal clocks then.
> >   - Some register contents differ slightly between the two
> > components. To
> >     work around this I added register bits/masks with a DPINTF_
> > prefix
> >     and use them where different.
> > 
> > Based on a separate driver for dpintf created by
> > Jason-JH.Lin <jason-jh.lin-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > .
> > 
> > Signed-off-by: Markus Schneider-Pargmann <
> > msp-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> > Signed-off-by: Guillaume Ranquet <
> > granquet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> > ---
> >   drivers/gpu/drm/mediatek/mtk_dpi.c          | 126
> > +++++++++++++++++---
> >   drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  35 ++++++
> >   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   8 ++
> >   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
> >   drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   5 +-
> >   include/linux/soc/mediatek/mtk-mmsys.h      |   4 +-
> >   6 files changed, 159 insertions(+), 20 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index eb969c5c5c2e..763bfb700135 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -71,6 +71,7 @@ struct mtk_dpi {
> >   	void __iomem *regs;
> >   	struct device *dev;
> >   	struct clk *engine_clk;
> > +	struct clk *dpi_ck_cg;
> >   	struct clk *pixel_clk;
> >   	struct clk *tvd_clk;
> >   	int irq;
> > @@ -126,6 +127,7 @@ struct mtk_dpi_conf {
> >   	const u32 *output_fmts;
> >   	u32 num_output_fmts;
> >   	bool is_ck_de_pol;
> > +	bool is_dpintf;
> >   	bool swap_input_support;
> >   	/* Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH
> > (no shift) */
> >   	u32 dimension_mask;
> > @@ -438,6 +440,8 @@ static void mtk_dpi_power_off(struct mtk_dpi
> > *dpi)
> >   	mtk_dpi_disable(dpi);
> >   	clk_disable_unprepare(dpi->pixel_clk);
> >   	clk_disable_unprepare(dpi->engine_clk);
> > +	clk_disable_unprepare(dpi->dpi_ck_cg);
> > +	clk_disable_unprepare(dpi->tvd_clk);
> >   }
> >   
> >   static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> > @@ -447,12 +451,24 @@ static int mtk_dpi_power_on(struct mtk_dpi
> > *dpi)
> >   	if (++dpi->refcount != 1)
> >   		return 0;
> >   
> 
> Hi,
> 
> belwo the error handling path looks odd. (both where we goto, and
> the 
> order of the clk_disable_unprepare() in the error handling path.
> 
> just my 2c,
> 
> CJ
> 

Hello Christophe,

Thanks for your review.
I will fix this order in enxt version.

Thanks

BRs,
Bo-Chen

> > +	ret = clk_prepare_enable(dpi->tvd_clk);
> > +	if (ret) {
> > +		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n",
> > ret);
> > +		goto err_pixel;
> > +	}
> > +
> >   	ret = clk_prepare_enable(dpi->engine_clk);
> >   	if (ret) {
> >   		dev_err(dpi->dev, "Failed to enable engine clock:
> > %d\n", ret);
> >   		goto err_refcount;
> >   	}
> >   
> > +	ret = clk_prepare_enable(dpi->dpi_ck_cg);
> > +	if (ret) {
> > +		dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock:
> > %d\n", ret);
> > +		goto err_ck_cg;
> > +	}
> > +
> >   	ret = clk_prepare_enable(dpi->pixel_clk);
> >   	if (ret) {
> >   		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n",
> > ret);
> > @@ -466,6 +482,8 @@ static int mtk_dpi_power_on(struct mtk_dpi
> > *dpi)
> >   	return 0;
> >   
> >   err_pixel:
> > +	clk_disable_unprepare(dpi->dpi_ck_cg);
> > +err_ck_cg:
> >   	clk_disable_unprepare(dpi->engine_clk);
> >   err_refcount:
> >   	dpi->refcount--;
> 
> [...]
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Rex-BC Chen (陳柏辰) June 13, 2022, 6:10 a.m. UTC | #4
On Wed, 2022-05-25 at 14:58 +0200, AngeloGioacchino Del Regno wrote:
> Il 23/05/22 12:47, Guillaume Ranquet ha scritto:
> > dpintf is the displayport interface hardware unit. This unit is
> > similar
> > to dpi and can reuse most of the code.
> > 
> > This patch adds support for mt8195-dpintf to this dpi driver. Main
> > differences are:
> >   - Some features/functional components are not available for
> > dpintf
> >     which are now excluded from code execution once is_dpintf is
> > set
> >   - dpintf can and needs to choose between different clockdividers
> > based
> >     on the clockspeed. This is done by choosing a different clock
> > parent.
> >   - There are two additional clocks that need to be managed. These
> > are
> >     only set for dpintf and will be set to NULL if not supplied.
> > The
> >     clk_* calls handle these as normal clocks then.
> >   - Some register contents differ slightly between the two
> > components. To
> >     work around this I added register bits/masks with a DPINTF_
> > prefix
> >     and use them where different.
> > 
> > Based on a separate driver for dpintf created by
> > Jason-JH.Lin <jason-jh.lin@mediatek.com>.
> > 
> 
> Only after finishing the review, I've noticed that I just wrote the
> same things
> that I wrote in my review for version 8... and if I recall correctly,
> this is not
> the first time that something like that happens.
> 
> Please pay attention to what reviewers say, as to not waste anyone's
> time.
> 

Hello Angelo,

I will help to fix these issue in next version.

> 
> > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > ---
> >   drivers/gpu/drm/mediatek/mtk_dpi.c          | 126
> > +++++++++++++++++---
> >   drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  35 ++++++
> >   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   8 ++
> >   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
> >   drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   5 +-
> >   include/linux/soc/mediatek/mtk-mmsys.h      |   4 +-
> >   6 files changed, 159 insertions(+), 20 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index eb969c5c5c2e..763bfb700135 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -71,6 +71,7 @@ struct mtk_dpi {
> >   	void __iomem *regs;
> >   	struct device *dev;
> >   	struct clk *engine_clk;
> > +	struct clk *dpi_ck_cg;
> >   	struct clk *pixel_clk;
> >   	struct clk *tvd_clk;
> >   	int irq;
> > @@ -126,6 +127,7 @@ struct mtk_dpi_conf {
> >   	const u32 *output_fmts;
> >   	u32 num_output_fmts;
> >   	bool is_ck_de_pol;
> > +	bool is_dpintf;
> >   	bool swap_input_support;
> >   	/* Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH
> > (no shift) */
> >   	u32 dimension_mask;
> > @@ -438,6 +440,8 @@ static void mtk_dpi_power_off(struct mtk_dpi
> > *dpi)
> >   	mtk_dpi_disable(dpi);
> >   	clk_disable_unprepare(dpi->pixel_clk);
> >   	clk_disable_unprepare(dpi->engine_clk);
> > +	clk_disable_unprepare(dpi->dpi_ck_cg);
> > +	clk_disable_unprepare(dpi->tvd_clk);
> >   }
> >   
> >   static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> > @@ -447,12 +451,24 @@ static int mtk_dpi_power_on(struct mtk_dpi
> > *dpi)
> >   	if (++dpi->refcount != 1)
> >   		return 0;
> >   
> > +	ret = clk_prepare_enable(dpi->tvd_clk);
> > +	if (ret) {
> > +		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n",
> > ret);
> > +		goto err_pixel;
> > +	}
> > +
> >   	ret = clk_prepare_enable(dpi->engine_clk);
> >   	if (ret) {
> >   		dev_err(dpi->dev, "Failed to enable engine clock:
> > %d\n", ret);
> >   		goto err_refcount;
> >   	}
> >   
> > +	ret = clk_prepare_enable(dpi->dpi_ck_cg);
> > +	if (ret) {
> > +		dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock:
> > %d\n", ret);
> > +		goto err_ck_cg;
> > +	}
> > +
> >   	ret = clk_prepare_enable(dpi->pixel_clk);
> >   	if (ret) {
> >   		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n",
> > ret);
> > @@ -466,6 +482,8 @@ static int mtk_dpi_power_on(struct mtk_dpi
> > *dpi)
> >   	return 0;
> >   
> >   err_pixel:
> > +	clk_disable_unprepare(dpi->dpi_ck_cg);
> > +err_ck_cg:
> >   	clk_disable_unprepare(dpi->engine_clk);
> >   err_refcount:
> >   	dpi->refcount--;
> > @@ -498,11 +516,11 @@ static int mtk_dpi_set_display_mode(struct
> > mtk_dpi *dpi,
> >   
> >   	vm.pixelclock = pll_rate / factor;
> >   	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
> > -	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
> > +		 (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
> 
> The indentation was perfect before that change...
> 
> >   		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
> > -	else
> > +	} else {
> >   		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
> > -
> > +	}
> >   
> >   	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
> >   
> > @@ -515,9 +533,15 @@ static int mtk_dpi_set_display_mode(struct
> > mtk_dpi *dpi,
> >   			    MTK_DPI_POLARITY_FALLING :
> > MTK_DPI_POLARITY_RISING;
> >   	dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
> >   			    MTK_DPI_POLARITY_FALLING :
> > MTK_DPI_POLARITY_RISING;
> > -	hsync.sync_width = vm.hsync_len;
> > -	hsync.back_porch = vm.hback_porch;
> > -	hsync.front_porch = vm.hfront_porch;
> > +	if (dpi->conf->is_dpintf) {
> > +		hsync.sync_width = vm.hsync_len / 4;
> > +		hsync.back_porch = vm.hback_porch / 4;
> > +		hsync.front_porch = vm.hfront_porch / 4;
> > +	} else {
> > +		hsync.sync_width = vm.hsync_len;
> > +		hsync.back_porch = vm.hback_porch;
> > +		hsync.front_porch = vm.hfront_porch;
> > +	}
> 
> This looks way better:
> 
> 	hsync.sync_width = vm.hsync_len;
> 	hsync.back_porch = vm.hback_porch;
> 	hsync.front_porch = vm.hfront_porch;
> 
> 	/* For DPINTF, we need to divide everything by 4 .. lanes? */
> 	if (dpi->conf->is_dpintf) {
> 		hsync.sync_width /= 4;
> 		hsync.back_porch /= 4;
> 		hsync.front_porch /= 4;
> 	}
> 

ok.

> >   	hsync.shift_half_line = false;
> >   	vsync_lodd.sync_width = vm.vsync_len;
> >   	vsync_lodd.back_porch = vm.vback_porch;
> > @@ -559,13 +583,20 @@ static int mtk_dpi_set_display_mode(struct
> > mtk_dpi *dpi,
> >   	mtk_dpi_config_channel_limit(dpi);
> >   	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
> >   	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
> > -	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
> >   	mtk_dpi_config_color_format(dpi, dpi->color_format);
> > -	mtk_dpi_config_2n_h_fre(dpi);
> > -	mtk_dpi_dual_edge(dpi);
> > -	mtk_dpi_config_disable_edge(dpi);
> > +	if (dpi->conf->is_dpintf) {
> > +		mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
> > +			     DPINTF_INPUT_2P_EN);
> > +	} else {
> > +		mtk_dpi_config_yc_map(dpi, dpi->yc_map);
> > +		mtk_dpi_config_2n_h_fre(dpi);
> > +		mtk_dpi_dual_edge(dpi);
> > +		mtk_dpi_config_disable_edge(dpi);
> > +	}
> >   	mtk_dpi_sw_reset(dpi, false);
> >   
> > +	mtk_dpi_enable(dpi);
> > +
> >   	return 0;
> >   }
> >   
> > @@ -608,7 +639,6 @@ static u32
> > *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge
> > *bridge,
> >   	u32 *input_fmts;
> >   
> >   	*num_input_fmts = 0;
> > -
> 
> Removing this line is not part of adding dpintf support, so don't do
> that.
> 

ok.

> >   	input_fmts = kcalloc(1, sizeof(*input_fmts),
> >   			     GFP_KERNEL);
> >   	if (!input_fmts)
> > @@ -634,15 +664,18 @@ static int mtk_dpi_bridge_atomic_check(struct
> > drm_bridge *bridge,
> >   		if (dpi->conf->num_output_fmts)
> >   			out_bus_format = dpi->conf->output_fmts[0];
> >   
> > -	dev_dbg(dpi->dev, "input format 0x%04x, output format
> > 0x%04x\n",
> > -		bridge_state->input_bus_cfg.format,
> > -		bridge_state->output_bus_cfg.format);
> > +	dev_info(dpi->dev, "input format 0x%04x, output format
> > 0x%04x\n",
> > +		 bridge_state->input_bus_cfg.format,
> > +		 bridge_state->output_bus_cfg.format);
> 
> This message is not giving any constantly changing information, nor
> any one that
> is interesting for the user: keep this as dev_dbg().
> 

ok.

> >   
> >   	dpi->output_fmt = out_bus_format;
> >   	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> >   	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> >   	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> > -	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> > +	if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> > +		dpi->color_format =
> > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;
> > +	else
> > +		dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> >   
> >   	return 0;
> >   }
> > @@ -687,7 +720,7 @@ mtk_dpi_bridge_mode_valid(struct drm_bridge
> > *bridge,
> >   {
> >   	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> >   
> > -	if (mode->clock > dpi->conf->max_clock_khz)
> > +	if (dpi->conf->max_clock_khz && mode->clock > dpi->conf-
> > >max_clock_khz)
> >   		return MODE_CLOCK_HIGH;
> >   
> >   	return MODE_OK;
> > @@ -801,6 +834,16 @@ static unsigned int
> > mt8183_calculate_factor(int clock)
> >   		return 2;
> >   }
> >   
> > +static unsigned int mt8195_dpintf_calculate_factor(int clock)
> > +{
> > +	if (clock < 70000)
> 
> is 70000 intentional? Or did you mean 700000?
> 

70000 is correct, the unit for this is KHz.


> > +		return 4;
> > +	else if (clock < 200000)
> > +		return 2;
> > +	else
> > +		return 1;
> > +}
> > +
> >   static const u32 mt8173_output_fmts[] = {
> >   	MEDIA_BUS_FMT_RGB888_1X24,
> >   };
> > @@ -810,6 +853,12 @@ static const u32 mt8183_output_fmts[] = {
> >   	MEDIA_BUS_FMT_RGB888_2X12_BE,
> >   };
> >   
> > +static const u32 mt8195_output_fmts[] = {
> > +	MEDIA_BUS_FMT_RGB888_1X24,
> > +	MEDIA_BUS_FMT_YUV8_1X24,
> > +	MEDIA_BUS_FMT_YUYV8_1X16,
> > +};
> > +
> >   static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
> >   	.c_bottom = 0x0010,
> >   	.c_top = 0x0FE0,
> > @@ -817,6 +866,13 @@ static const struct mtk_dpi_yc_limit
> > mtk_dpi_limit = {
> >   	.y_top = 0x0FE0,
> >   };
> >   
> > +static const struct mtk_dpi_yc_limit mtk_dpintf_limit = {
> > +	.c_bottom = 0x0000,
> > +	.c_top = 0xFFF,
> > +	.y_bottom = 0x0000,
> > +	.y_top = 0xFFF,
> > +};
> > +
> >   static const struct mtk_dpi_conf mt8173_conf = {
> >   	.cal_factor = mt8173_calculate_factor,
> >   	.reg_h_fre_con = 0xe0,
> > @@ -882,6 +938,19 @@ static const struct mtk_dpi_conf mt8192_conf =
> > {
> >   	.limit = &mtk_dpi_limit,
> >   };
> >   
> > +static const struct mtk_dpi_conf mt8195_dpintf_conf = {
> > +	.cal_factor = mt8195_dpintf_calculate_factor,
> > +	.output_fmts = mt8195_output_fmts,
> > +	.num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
> > +	.is_dpintf = true,
> > +	.dimension_mask = DPINTF_HPW_MASK,
> > +	.hvsize_mask = DPINTF_HSIZE_MASK,
> > +	.channel_swap_shift = DPINTF_CH_SWAP,
> > +	.yuv422_en_bit = DPINTF_YUV422_EN,
> > +	.csc_enable_bit = DPINTF_CSC_ENABLE,
> > +	.limit = &mtk_dpintf_limit,
> > +};
> > +
> >   static int mtk_dpi_probe(struct platform_device *pdev)
> >   {
> >   	struct device *dev = &pdev->dev;
> > @@ -929,7 +998,27 @@ static int mtk_dpi_probe(struct
> > platform_device *pdev)
> >   	if (IS_ERR(dpi->engine_clk)) {
> >   		ret = PTR_ERR(dpi->engine_clk);
> >   		if (ret != -EPROBE_DEFER)
> > -			dev_err(dev, "Failed to get engine clock:
> > %d\n", ret);
> > +			dev_err(dev, "Failed to get engine clock:
> > %d\n",
> > +				ret);
> 
> Why are you breaking this line?
> 

I will fix this.

> > +
> > +		return ret;
> > +	}
> > +
> > +	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
> > +	if (IS_ERR(dpi->dpi_ck_cg)) {
> > +		ret = PTR_ERR(dpi->dpi_ck_cg);
> > +		if (ret != -EPROBE_DEFER)
> > +			dev_err(dev, "Failed to get dpi ck cg clock:
> > %d\n",
> > +				ret);
> > +
> > +		return ret;
> > +	}
> > +
> 
> You're getting this clock twice, what happened here?
> 
> P.S.: As I explained on the dt-bindings patch, you likely don't even
> need this
>        clock at all.
> 

I will remove this.
For this clock gate, we stiil need to enable it.

I reply in binding patch.

I rename it as pll_gate.

> > +	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
> > +	if (IS_ERR(dpi->dpi_ck_cg)) {
> > +		ret = PTR_ERR(dpi->dpi_ck_cg);
> > +		if (ret != -EPROBE_DEFER)
> > +			dev_err(dev, "Failed to get dpi ck cg clock:
> > %d\n", ret);
> >   
> >   		return ret;
> >   	}
> > @@ -1004,6 +1093,9 @@ static const struct of_device_id
> > mtk_dpi_of_ids[] = {
> >   	{ .compatible = "mediatek,mt8192-dpi",
> >   	  .data = &mt8192_conf,
> >   	},
> > +	{ .compatible = "mediatek,mt8195-dpintf",
> > +	  .data = &mt8195_dpintf_conf,
> > +	},
> >   	{ },
> >   };
> >   MODULE_DEVICE_TABLE(of, mtk_dpi_of_ids);
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > index 3a02fabe1662..dd47dd3f2e4f 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> > @@ -40,10 +40,15 @@
> >   #define FAKE_DE_LEVEN			BIT(21)
> >   #define FAKE_DE_RODD			BIT(22)
> >   #define FAKE_DE_REVEN			BIT(23)
> > +#define DPINTF_YUV422_EN		BIT(24)
> > +#define DPINTF_CSC_ENABLE		BIT(26)
> > +#define DPINTF_INPUT_2P_EN		BIT(29)
> >   
> >   #define DPI_OUTPUT_SETTING	0x14
> >   #define CH_SWAP				0
> > +#define DPINTF_CH_SWAP			BIT(1)
> >   #define CH_SWAP_MASK			(0x7 << 0)
> > +#define DPINTF_CH_SWAP_MASK		(0x7 << 1)
> >   #define SWAP_RGB			0x00
> >   #define SWAP_GBR			0x01
> >   #define SWAP_BRG			0x02
> > @@ -80,8 +85,10 @@
> >   #define DPI_SIZE		0x18
> >   #define HSIZE				0
> >   #define HSIZE_MASK			(0x1FFF << 0)
> > +#define DPINTF_HSIZE_MASK		(0xFFFF << 0)
> >   #define VSIZE				16
> >   #define VSIZE_MASK			(0x1FFF << 16)
> > +#define DPINTF_VSIZE_MASK		(0xFFFF << 16)
> >   
> >   #define DPI_DDR_SETTING		0x1C
> >   #define DDR_EN				BIT(0)
> > @@ -93,24 +100,30 @@
> >   #define DPI_TGEN_HWIDTH		0x20
> >   #define HPW				0
> >   #define HPW_MASK			(0xFFF << 0)
> > +#define DPINTF_HPW_MASK			(0xFFFF << 0)
> >   
> >   #define DPI_TGEN_HPORCH		0x24
> >   #define HBP				0
> >   #define HBP_MASK			(0xFFF << 0)
> > +#define DPINTF_HBP_MASK			(0xFFFF << 0)
> >   #define HFP				16
> >   #define HFP_MASK			(0xFFF << 16)
> > +#define DPINTF_HFP_MASK			(0xFFFF << 16)
> >   
> >   #define DPI_TGEN_VWIDTH		0x28
> >   #define DPI_TGEN_VPORCH		0x2C
> >   
> >   #define VSYNC_WIDTH_SHIFT		0
> >   #define VSYNC_WIDTH_MASK		(0xFFF << 0)
> > +#define DPINTF_VSYNC_WIDTH_MASK		(0xFFFF << 0)
> >   #define VSYNC_HALF_LINE_SHIFT		16
> >   #define VSYNC_HALF_LINE_MASK		BIT(16)
> >   #define VSYNC_BACK_PORCH_SHIFT		0
> >   #define VSYNC_BACK_PORCH_MASK		(0xFFF << 0)
> > +#define DPINTF_VSYNC_BACK_PORCH_MASK	(0xFFFF << 0)
> >   #define VSYNC_FRONT_PORCH_SHIFT		16
> >   #define VSYNC_FRONT_PORCH_MASK		(0xFFF << 16)
> > +#define DPINTF_VSYNC_FRONT_PORCH_MASK	(0xFFFF << 16)
> >   
> >   #define DPI_BG_HCNTL		0x30
> >   #define BG_RIGHT			(0x1FFF << 0)
> > @@ -217,4 +230,26 @@
> >   
> >   #define EDGE_SEL_EN			BIT(5)
> >   #define H_FRE_2N			BIT(25)
> > +
> > +#define RGB_TO_JPEG			0x00
> 
> This is 0x0
> 
> > +#define RGB_TO_FULL709			0x01
> 
> 0x1
> 
> > +#define RGB_TO_BT601			0x02
> 
> 0x2
> 
> ...remove the unnecessary leading zeros, but... you're not ever
> using this set of definitions, so why are you even adding them?
> 

ok, I will remove them.

> > +#define RGB_TO_BT709			0x03
> > +#define JPEG_TO_RGB			0x04
> > +#define FULL709_TO_RGB			0x05
> > +#define BT601_TO_RGB			0x06
> > +#define BT709_TO_RGB			0x07
> > +#define JPEG_TO_BT601			0x08
> > +#define JPEG_TO_BT709			0x09
> > +#define BT601_TO_JPEG			0xA
> > +#define BT709_TO_JPEG			0xB
> > +#define BT709_TO_BT601			0xC
> > +#define BT601_TO_BT709			0xD
> > +#define JPEG_TO_CERGB			0x14
> > +#define FULL709_TO_CERGB		0x15
> > +#define BT601_TO_CERGB			0x16
> > +#define BT709_TO_CERGB			0x17
> > +#define RGB_TO_CERGB			0x1C
> > +#define MATRIX_BIT			BIT(8)
> > +#define EXT_MATRIX_EN			BIT(12)
> >   #endif /* __MTK_DPI_REGS_H */
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > index 245d0074e12d..3738665a712e 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > @@ -419,6 +419,11 @@ static const char * const
> > mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] = {
> >   	[MTK_DISP_WDMA] = "wdma",
> >   	[MTK_DPI] = "dpi",
> >   	[MTK_DSI] = "dsi",
> > +	[MTK_DP_INTF] = "dp-intf",
> > +	[MTK_DISP_PWM] = "pwm",
> > +	[MTK_DISP_MUTEX] = "mutex",
> > +	[MTK_DISP_OD] = "od",
> > +	[MTK_DISP_BLS] = "bls",
> 
> Please keep alphabetic order.
> 

Some of this are redundant, and I will remove them.

> >   };
> >   
> >   struct mtk_ddp_comp_match {
> > @@ -439,6 +444,8 @@ static const struct mtk_ddp_comp_match
> > mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
> >   	[DDP_COMPONENT_DPI1]		= { MTK_DPI,			
> > 1, &ddp_dpi },
> >   	[DDP_COMPONENT_DSC0]		= { MTK_DISP_DSC,		
> > 0, &ddp_dsc },
> >   	[DDP_COMPONENT_DSC1]		= { MTK_DISP_DSC,		
> > 1, &ddp_dsc },
> > +	[DDP_COMPONENT_DP_INTF0]	= { MTK_DP_INTF,	0, &ddp_dpi
> > },
> > +	[DDP_COMPONENT_DP_INTF1]	= { MTK_DP_INTF,	1, &ddp_dpi
> > },
> 
> Indentation issue. Fix it.
> 

Some of this are redundant, and I will remove them.

> >   	[DDP_COMPONENT_DSI0]		= { MTK_DSI,			
> > 0, &ddp_dsi },
> >   	[DDP_COMPONENT_DSI1]		= { MTK_DSI,			
> > 1, &ddp_dsi },
> >   	[DDP_COMPONENT_DSI2]		= { MTK_DSI,			
> > 2, &ddp_dsi },
> > @@ -565,6 +572,7 @@ int mtk_ddp_comp_init(struct device_node *node,
> > struct mtk_ddp_comp *comp,
> >   	    type == MTK_DISP_PWM ||
> >   	    type == MTK_DISP_RDMA ||
> >   	    type == MTK_DPI ||
> > +	    type == MTK_DP_INTF ||
> >   	    type == MTK_DSI)
> >   		return 0;
> >   
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > index 825d763d2378..c4e683f46a95 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > @@ -37,6 +37,7 @@ enum mtk_ddp_comp_type {
> >   	MTK_DISP_UFOE,
> >   	MTK_DISP_WDMA,
> >   	MTK_DPI,
> > +	MTK_DP_INTF,
> >   	MTK_DSI,
> >   	MTK_DDP_COMP_TYPE_MAX,
> >   };
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > index a2a783fc580e..e25ac61aac08 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > @@ -690,6 +690,8 @@ static const struct of_device_id
> > mtk_ddp_comp_dt_ids[] = {
> >   	  .data = (void *)MTK_DPI },
> >   	{ .compatible = "mediatek,mt8183-dpi",
> >   	  .data = (void *)MTK_DPI },
> > +	{ .compatible = "mediatek,mt8195-dpintf",
> > +	  .data = (void *)MTK_DP_INTF },
> >   	{ .compatible = "mediatek,mt2701-dsi",
> >   	  .data = (void *)MTK_DSI },
> >   	{ .compatible = "mediatek,mt8173-dsi",
> > @@ -801,8 +803,9 @@ static int mtk_drm_probe(struct platform_device
> > *pdev)
> >   		    comp_type == MTK_DISP_OVL_2L ||
> >   		    comp_type == MTK_DISP_OVL_ADAPTOR ||
> >   		    comp_type == MTK_DISP_RDMA ||
> > +		    comp_type == MTK_DSI ||
> >   		    comp_type == MTK_DPI ||
> > -		    comp_type == MTK_DSI) {
> > +		    comp_type == MTK_DP_INTF) {
> 
> These were nice and alphabetically ordered, why are you moving
> MTK_DSI up there?!
> 
>   		    comp_type == MTK_DISP_RDMA ||
> 		    comp_type == MTK_DP_INTF ||
>   		    comp_type == MTK_DPI ||
> 		    comp_type == MTK_DSI) {
> 
> ... that's how it should look like.
> 

Some of this are redundant, and I will remove them.

> >   			dev_info(dev, "Adding component match for
> > %pOF\n",
> >   				 node);
> >   			drm_of_component_match_add(dev, &match,
> > component_compare_of,
> > diff --git a/include/linux/soc/mediatek/mtk-mmsys.h
> > b/include/linux/soc/mediatek/mtk-mmsys.h
> > index 3e998bfb795a..e4b84c347201 100644
> > --- a/include/linux/soc/mediatek/mtk-mmsys.h
> > +++ b/include/linux/soc/mediatek/mtk-mmsys.h
> > @@ -21,12 +21,12 @@ enum mtk_ddp_comp_id {
> >   	DDP_COMPONENT_COLOR0,
> >   	DDP_COMPONENT_COLOR1,
> >   	DDP_COMPONENT_DITHER,
> > -	DDP_COMPONENT_DP_INTF0,
> > -	DDP_COMPONENT_DP_INTF1,
> >   	DDP_COMPONENT_DPI0,
> >   	DDP_COMPONENT_DPI1,
> >   	DDP_COMPONENT_DSC0,
> >   	DDP_COMPONENT_DSC1,
> > +	DDP_COMPONENT_DP_INTF0,
> > +	DDP_COMPONENT_DP_INTF1,
> 
> Why are you moving this?!
> 

I will fix this.

BRs,
Bo-Chen

> >   	DDP_COMPONENT_DSI0,
> >   	DDP_COMPONENT_DSI1,
> >   	DDP_COMPONENT_DSI2,
> 
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index eb969c5c5c2e..763bfb700135 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -71,6 +71,7 @@  struct mtk_dpi {
 	void __iomem *regs;
 	struct device *dev;
 	struct clk *engine_clk;
+	struct clk *dpi_ck_cg;
 	struct clk *pixel_clk;
 	struct clk *tvd_clk;
 	int irq;
@@ -126,6 +127,7 @@  struct mtk_dpi_conf {
 	const u32 *output_fmts;
 	u32 num_output_fmts;
 	bool is_ck_de_pol;
+	bool is_dpintf;
 	bool swap_input_support;
 	/* Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH (no shift) */
 	u32 dimension_mask;
@@ -438,6 +440,8 @@  static void mtk_dpi_power_off(struct mtk_dpi *dpi)
 	mtk_dpi_disable(dpi);
 	clk_disable_unprepare(dpi->pixel_clk);
 	clk_disable_unprepare(dpi->engine_clk);
+	clk_disable_unprepare(dpi->dpi_ck_cg);
+	clk_disable_unprepare(dpi->tvd_clk);
 }
 
 static int mtk_dpi_power_on(struct mtk_dpi *dpi)
@@ -447,12 +451,24 @@  static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 	if (++dpi->refcount != 1)
 		return 0;
 
+	ret = clk_prepare_enable(dpi->tvd_clk);
+	if (ret) {
+		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
+		goto err_pixel;
+	}
+
 	ret = clk_prepare_enable(dpi->engine_clk);
 	if (ret) {
 		dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
 		goto err_refcount;
 	}
 
+	ret = clk_prepare_enable(dpi->dpi_ck_cg);
+	if (ret) {
+		dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock: %d\n", ret);
+		goto err_ck_cg;
+	}
+
 	ret = clk_prepare_enable(dpi->pixel_clk);
 	if (ret) {
 		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
@@ -466,6 +482,8 @@  static int mtk_dpi_power_on(struct mtk_dpi *dpi)
 	return 0;
 
 err_pixel:
+	clk_disable_unprepare(dpi->dpi_ck_cg);
+err_ck_cg:
 	clk_disable_unprepare(dpi->engine_clk);
 err_refcount:
 	dpi->refcount--;
@@ -498,11 +516,11 @@  static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 
 	vm.pixelclock = pll_rate / factor;
 	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
-	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
+		 (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
 		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
-	else
+	} else {
 		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
-
+	}
 
 	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
 
@@ -515,9 +533,15 @@  static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
 	dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
 			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
-	hsync.sync_width = vm.hsync_len;
-	hsync.back_porch = vm.hback_porch;
-	hsync.front_porch = vm.hfront_porch;
+	if (dpi->conf->is_dpintf) {
+		hsync.sync_width = vm.hsync_len / 4;
+		hsync.back_porch = vm.hback_porch / 4;
+		hsync.front_porch = vm.hfront_porch / 4;
+	} else {
+		hsync.sync_width = vm.hsync_len;
+		hsync.back_porch = vm.hback_porch;
+		hsync.front_porch = vm.hfront_porch;
+	}
 	hsync.shift_half_line = false;
 	vsync_lodd.sync_width = vm.vsync_len;
 	vsync_lodd.back_porch = vm.vback_porch;
@@ -559,13 +583,20 @@  static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	mtk_dpi_config_channel_limit(dpi);
 	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
 	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
-	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
 	mtk_dpi_config_color_format(dpi, dpi->color_format);
-	mtk_dpi_config_2n_h_fre(dpi);
-	mtk_dpi_dual_edge(dpi);
-	mtk_dpi_config_disable_edge(dpi);
+	if (dpi->conf->is_dpintf) {
+		mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
+			     DPINTF_INPUT_2P_EN);
+	} else {
+		mtk_dpi_config_yc_map(dpi, dpi->yc_map);
+		mtk_dpi_config_2n_h_fre(dpi);
+		mtk_dpi_dual_edge(dpi);
+		mtk_dpi_config_disable_edge(dpi);
+	}
 	mtk_dpi_sw_reset(dpi, false);
 
+	mtk_dpi_enable(dpi);
+
 	return 0;
 }
 
@@ -608,7 +639,6 @@  static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
 	u32 *input_fmts;
 
 	*num_input_fmts = 0;
-
 	input_fmts = kcalloc(1, sizeof(*input_fmts),
 			     GFP_KERNEL);
 	if (!input_fmts)
@@ -634,15 +664,18 @@  static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
 		if (dpi->conf->num_output_fmts)
 			out_bus_format = dpi->conf->output_fmts[0];
 
-	dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
-		bridge_state->input_bus_cfg.format,
-		bridge_state->output_bus_cfg.format);
+	dev_info(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
+		 bridge_state->input_bus_cfg.format,
+		 bridge_state->output_bus_cfg.format);
 
 	dpi->output_fmt = out_bus_format;
 	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
 	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
 	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
-	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
+	if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
+		dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;
+	else
+		dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
 
 	return 0;
 }
@@ -687,7 +720,7 @@  mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
 {
 	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
-	if (mode->clock > dpi->conf->max_clock_khz)
+	if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
@@ -801,6 +834,16 @@  static unsigned int mt8183_calculate_factor(int clock)
 		return 2;
 }
 
+static unsigned int mt8195_dpintf_calculate_factor(int clock)
+{
+	if (clock < 70000)
+		return 4;
+	else if (clock < 200000)
+		return 2;
+	else
+		return 1;
+}
+
 static const u32 mt8173_output_fmts[] = {
 	MEDIA_BUS_FMT_RGB888_1X24,
 };
@@ -810,6 +853,12 @@  static const u32 mt8183_output_fmts[] = {
 	MEDIA_BUS_FMT_RGB888_2X12_BE,
 };
 
+static const u32 mt8195_output_fmts[] = {
+	MEDIA_BUS_FMT_RGB888_1X24,
+	MEDIA_BUS_FMT_YUV8_1X24,
+	MEDIA_BUS_FMT_YUYV8_1X16,
+};
+
 static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
 	.c_bottom = 0x0010,
 	.c_top = 0x0FE0,
@@ -817,6 +866,13 @@  static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
 	.y_top = 0x0FE0,
 };
 
+static const struct mtk_dpi_yc_limit mtk_dpintf_limit = {
+	.c_bottom = 0x0000,
+	.c_top = 0xFFF,
+	.y_bottom = 0x0000,
+	.y_top = 0xFFF,
+};
+
 static const struct mtk_dpi_conf mt8173_conf = {
 	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
@@ -882,6 +938,19 @@  static const struct mtk_dpi_conf mt8192_conf = {
 	.limit = &mtk_dpi_limit,
 };
 
+static const struct mtk_dpi_conf mt8195_dpintf_conf = {
+	.cal_factor = mt8195_dpintf_calculate_factor,
+	.output_fmts = mt8195_output_fmts,
+	.num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
+	.is_dpintf = true,
+	.dimension_mask = DPINTF_HPW_MASK,
+	.hvsize_mask = DPINTF_HSIZE_MASK,
+	.channel_swap_shift = DPINTF_CH_SWAP,
+	.yuv422_en_bit = DPINTF_YUV422_EN,
+	.csc_enable_bit = DPINTF_CSC_ENABLE,
+	.limit = &mtk_dpintf_limit,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -929,7 +998,27 @@  static int mtk_dpi_probe(struct platform_device *pdev)
 	if (IS_ERR(dpi->engine_clk)) {
 		ret = PTR_ERR(dpi->engine_clk);
 		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get engine clock: %d\n", ret);
+			dev_err(dev, "Failed to get engine clock: %d\n",
+				ret);
+
+		return ret;
+	}
+
+	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
+	if (IS_ERR(dpi->dpi_ck_cg)) {
+		ret = PTR_ERR(dpi->dpi_ck_cg);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get dpi ck cg clock: %d\n",
+				ret);
+
+		return ret;
+	}
+
+	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
+	if (IS_ERR(dpi->dpi_ck_cg)) {
+		ret = PTR_ERR(dpi->dpi_ck_cg);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get dpi ck cg clock: %d\n", ret);
 
 		return ret;
 	}
@@ -1004,6 +1093,9 @@  static const struct of_device_id mtk_dpi_of_ids[] = {
 	{ .compatible = "mediatek,mt8192-dpi",
 	  .data = &mt8192_conf,
 	},
+	{ .compatible = "mediatek,mt8195-dpintf",
+	  .data = &mt8195_dpintf_conf,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, mtk_dpi_of_ids);
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 3a02fabe1662..dd47dd3f2e4f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -40,10 +40,15 @@ 
 #define FAKE_DE_LEVEN			BIT(21)
 #define FAKE_DE_RODD			BIT(22)
 #define FAKE_DE_REVEN			BIT(23)
+#define DPINTF_YUV422_EN		BIT(24)
+#define DPINTF_CSC_ENABLE		BIT(26)
+#define DPINTF_INPUT_2P_EN		BIT(29)
 
 #define DPI_OUTPUT_SETTING	0x14
 #define CH_SWAP				0
+#define DPINTF_CH_SWAP			BIT(1)
 #define CH_SWAP_MASK			(0x7 << 0)
+#define DPINTF_CH_SWAP_MASK		(0x7 << 1)
 #define SWAP_RGB			0x00
 #define SWAP_GBR			0x01
 #define SWAP_BRG			0x02
@@ -80,8 +85,10 @@ 
 #define DPI_SIZE		0x18
 #define HSIZE				0
 #define HSIZE_MASK			(0x1FFF << 0)
+#define DPINTF_HSIZE_MASK		(0xFFFF << 0)
 #define VSIZE				16
 #define VSIZE_MASK			(0x1FFF << 16)
+#define DPINTF_VSIZE_MASK		(0xFFFF << 16)
 
 #define DPI_DDR_SETTING		0x1C
 #define DDR_EN				BIT(0)
@@ -93,24 +100,30 @@ 
 #define DPI_TGEN_HWIDTH		0x20
 #define HPW				0
 #define HPW_MASK			(0xFFF << 0)
+#define DPINTF_HPW_MASK			(0xFFFF << 0)
 
 #define DPI_TGEN_HPORCH		0x24
 #define HBP				0
 #define HBP_MASK			(0xFFF << 0)
+#define DPINTF_HBP_MASK			(0xFFFF << 0)
 #define HFP				16
 #define HFP_MASK			(0xFFF << 16)
+#define DPINTF_HFP_MASK			(0xFFFF << 16)
 
 #define DPI_TGEN_VWIDTH		0x28
 #define DPI_TGEN_VPORCH		0x2C
 
 #define VSYNC_WIDTH_SHIFT		0
 #define VSYNC_WIDTH_MASK		(0xFFF << 0)
+#define DPINTF_VSYNC_WIDTH_MASK		(0xFFFF << 0)
 #define VSYNC_HALF_LINE_SHIFT		16
 #define VSYNC_HALF_LINE_MASK		BIT(16)
 #define VSYNC_BACK_PORCH_SHIFT		0
 #define VSYNC_BACK_PORCH_MASK		(0xFFF << 0)
+#define DPINTF_VSYNC_BACK_PORCH_MASK	(0xFFFF << 0)
 #define VSYNC_FRONT_PORCH_SHIFT		16
 #define VSYNC_FRONT_PORCH_MASK		(0xFFF << 16)
+#define DPINTF_VSYNC_FRONT_PORCH_MASK	(0xFFFF << 16)
 
 #define DPI_BG_HCNTL		0x30
 #define BG_RIGHT			(0x1FFF << 0)
@@ -217,4 +230,26 @@ 
 
 #define EDGE_SEL_EN			BIT(5)
 #define H_FRE_2N			BIT(25)
+
+#define RGB_TO_JPEG			0x00
+#define RGB_TO_FULL709			0x01
+#define RGB_TO_BT601			0x02
+#define RGB_TO_BT709			0x03
+#define JPEG_TO_RGB			0x04
+#define FULL709_TO_RGB			0x05
+#define BT601_TO_RGB			0x06
+#define BT709_TO_RGB			0x07
+#define JPEG_TO_BT601			0x08
+#define JPEG_TO_BT709			0x09
+#define BT601_TO_JPEG			0xA
+#define BT709_TO_JPEG			0xB
+#define BT709_TO_BT601			0xC
+#define BT601_TO_BT709			0xD
+#define JPEG_TO_CERGB			0x14
+#define FULL709_TO_CERGB		0x15
+#define BT601_TO_CERGB			0x16
+#define BT709_TO_CERGB			0x17
+#define RGB_TO_CERGB			0x1C
+#define MATRIX_BIT			BIT(8)
+#define EXT_MATRIX_EN			BIT(12)
 #endif /* __MTK_DPI_REGS_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 245d0074e12d..3738665a712e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -419,6 +419,11 @@  static const char * const mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] = {
 	[MTK_DISP_WDMA] = "wdma",
 	[MTK_DPI] = "dpi",
 	[MTK_DSI] = "dsi",
+	[MTK_DP_INTF] = "dp-intf",
+	[MTK_DISP_PWM] = "pwm",
+	[MTK_DISP_MUTEX] = "mutex",
+	[MTK_DISP_OD] = "od",
+	[MTK_DISP_BLS] = "bls",
 };
 
 struct mtk_ddp_comp_match {
@@ -439,6 +444,8 @@  static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_DPI1]		= { MTK_DPI,			1, &ddp_dpi },
 	[DDP_COMPONENT_DSC0]		= { MTK_DISP_DSC,		0, &ddp_dsc },
 	[DDP_COMPONENT_DSC1]		= { MTK_DISP_DSC,		1, &ddp_dsc },
+	[DDP_COMPONENT_DP_INTF0]	= { MTK_DP_INTF,	0, &ddp_dpi },
+	[DDP_COMPONENT_DP_INTF1]	= { MTK_DP_INTF,	1, &ddp_dpi },
 	[DDP_COMPONENT_DSI0]		= { MTK_DSI,			0, &ddp_dsi },
 	[DDP_COMPONENT_DSI1]		= { MTK_DSI,			1, &ddp_dsi },
 	[DDP_COMPONENT_DSI2]		= { MTK_DSI,			2, &ddp_dsi },
@@ -565,6 +572,7 @@  int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
 	    type == MTK_DISP_PWM ||
 	    type == MTK_DISP_RDMA ||
 	    type == MTK_DPI ||
+	    type == MTK_DP_INTF ||
 	    type == MTK_DSI)
 		return 0;
 
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index 825d763d2378..c4e683f46a95 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -37,6 +37,7 @@  enum mtk_ddp_comp_type {
 	MTK_DISP_UFOE,
 	MTK_DISP_WDMA,
 	MTK_DPI,
+	MTK_DP_INTF,
 	MTK_DSI,
 	MTK_DDP_COMP_TYPE_MAX,
 };
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index a2a783fc580e..e25ac61aac08 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -690,6 +690,8 @@  static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt8183-dpi",
 	  .data = (void *)MTK_DPI },
+	{ .compatible = "mediatek,mt8195-dpintf",
+	  .data = (void *)MTK_DP_INTF },
 	{ .compatible = "mediatek,mt2701-dsi",
 	  .data = (void *)MTK_DSI },
 	{ .compatible = "mediatek,mt8173-dsi",
@@ -801,8 +803,9 @@  static int mtk_drm_probe(struct platform_device *pdev)
 		    comp_type == MTK_DISP_OVL_2L ||
 		    comp_type == MTK_DISP_OVL_ADAPTOR ||
 		    comp_type == MTK_DISP_RDMA ||
+		    comp_type == MTK_DSI ||
 		    comp_type == MTK_DPI ||
-		    comp_type == MTK_DSI) {
+		    comp_type == MTK_DP_INTF) {
 			dev_info(dev, "Adding component match for %pOF\n",
 				 node);
 			drm_of_component_match_add(dev, &match, component_compare_of,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index 3e998bfb795a..e4b84c347201 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -21,12 +21,12 @@  enum mtk_ddp_comp_id {
 	DDP_COMPONENT_COLOR0,
 	DDP_COMPONENT_COLOR1,
 	DDP_COMPONENT_DITHER,
-	DDP_COMPONENT_DP_INTF0,
-	DDP_COMPONENT_DP_INTF1,
 	DDP_COMPONENT_DPI0,
 	DDP_COMPONENT_DPI1,
 	DDP_COMPONENT_DSC0,
 	DDP_COMPONENT_DSC1,
+	DDP_COMPONENT_DP_INTF0,
+	DDP_COMPONENT_DP_INTF1,
 	DDP_COMPONENT_DSI0,
 	DDP_COMPONENT_DSI1,
 	DDP_COMPONENT_DSI2,