diff mbox series

[v3,1/3] dt-bindings: usb: typec: add bindings for stm32g0 controller

Message ID 20220713120842.560902-2-fabrice.gasnier@foss.st.com
State Superseded
Headers show
Series usb: typec: ucsi: add support for stm32g0 | expand

Commit Message

Fabrice Gasnier July 13, 2022, 12:08 p.m. UTC
Add DT schema documentation for the STM32G0 Type-C PD (Power Delivery)
controller.
STM32G0 provides an integrated USB Type-C and power delivery interface.
It can be programmed with a firmware to handle UCSI protocol over I2C
interface. A GPIO is used as an interrupt line.
It may be used as a wakeup source, so use optional "wakeup-source" and
"power-domains" properties to support wakeup.
The firmware itself may be flashed or later updated (optional). Choice is
let to the application to allow firmware update. A default firmware could
be already programmed in production and be customized (to not allow it).
So the firmware-name is made optional to represent this option.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
Changes in v3:
- Add connector to the required properties as pointed out by Krzysztof.
  Update commit message to explain why the firmware-name is optional.
Changes in v2:
- Krzysztof's review comments: update commit message, use ports, use
  unevaluatedProperties: false for usb-connector schema, define maxItems
  for power-domains, adopt generic node names, remove quotes
---
 .../bindings/usb/st,typec-stm32g0.yaml        | 91 +++++++++++++++++++
 1 file changed, 91 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml

Comments

Rob Herring (Arm) July 22, 2022, 12:25 a.m. UTC | #1
On Wed, 13 Jul 2022 14:08:40 +0200, Fabrice Gasnier wrote:
> Add DT schema documentation for the STM32G0 Type-C PD (Power Delivery)
> controller.
> STM32G0 provides an integrated USB Type-C and power delivery interface.
> It can be programmed with a firmware to handle UCSI protocol over I2C
> interface. A GPIO is used as an interrupt line.
> It may be used as a wakeup source, so use optional "wakeup-source" and
> "power-domains" properties to support wakeup.
> The firmware itself may be flashed or later updated (optional). Choice is
> let to the application to allow firmware update. A default firmware could
> be already programmed in production and be customized (to not allow it).
> So the firmware-name is made optional to represent this option.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
> Changes in v3:
> - Add connector to the required properties as pointed out by Krzysztof.
>   Update commit message to explain why the firmware-name is optional.
> Changes in v2:
> - Krzysztof's review comments: update commit message, use ports, use
>   unevaluatedProperties: false for usb-connector schema, define maxItems
>   for power-domains, adopt generic node names, remove quotes
> ---
>  .../bindings/usb/st,typec-stm32g0.yaml        | 91 +++++++++++++++++++
>  1 file changed, 91 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
new file mode 100644
index 0000000000000..1cb68cabe17df
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
@@ -0,0 +1,91 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32G0 USB Type-C PD controller
+
+description: |
+  The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
+  typically using the UCSI protocol over I2C, with a dedicated alert
+  (interrupt) pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32g0-typec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  wakeup-source: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      typec@53 {
+        compatible = "st,stm32g0-typec";
+        reg = <0x53>;
+        /* Alert pin on GPIO PE12 */
+        interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpioe>;
+
+        /* Example with one type-C connector */
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+              reg = <0>;
+              con_usb_c_ep: endpoint {
+                remote-endpoint = <&usb_ep>;
+              };
+            };
+          };
+        };
+      };
+    };
+
+    usb {
+      usb-role-switch;
+      port {
+        usb_ep: endpoint {
+          remote-endpoint = <&con_usb_c_ep>;
+        };
+      };
+    };
+...