Message ID | 20220927123926.953297-4-yanaijie@huawei.com |
---|---|
State | Superseded |
Headers | show |
Series | scsi: libsas: sas address comparison refactor | expand |
On 2022/9/28 6:57, Damien Le Moal wrote: > On 9/27/22 21:39, Jason Yan wrote: >> The attached phy id finding is open coded. Now we can replace it with >> sas_find_attached_phy_id(). To keep consistent, the return value of >> pm8001_dev_found_notify() is also changed to -ENODEV after calling >> sas_find_attathed_phy_id() failed. >> >> Signed-off-by: Jason Yan <yanaijie@huawei.com> >> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> >> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> >> --- >> drivers/scsi/pm8001/pm8001_sas.c | 18 ++++++------------ >> 1 file changed, 6 insertions(+), 12 deletions(-) >> >> diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c >> index 8e3f2f9ddaac..042c0843de1a 100644 >> --- a/drivers/scsi/pm8001/pm8001_sas.c >> +++ b/drivers/scsi/pm8001/pm8001_sas.c >> @@ -645,22 +645,16 @@ static int pm8001_dev_found_notify(struct domain_device *dev) >> pm8001_device->dcompletion = &completion; >> if (parent_dev && dev_is_expander(parent_dev->dev_type)) { >> int phy_id; >> - struct ex_phy *phy; >> - for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys; >> - phy_id++) { >> - phy = &parent_dev->ex_dev.ex_phy[phy_id]; >> - if (SAS_ADDR(phy->attached_sas_addr) >> - == SAS_ADDR(dev->sas_addr)) { >> - pm8001_device->attached_phy = phy_id; >> - break; >> - } >> - } >> - if (phy_id == parent_dev->ex_dev.num_phys) { >> + >> + phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev); >> + if (phy_id == -ENODEV) { >> pm8001_dbg(pm8001_ha, FAIL, >> "Error: no attached dev:%016llx at ex:%016llx.\n", >> SAS_ADDR(dev->sas_addr), >> SAS_ADDR(parent_dev->sas_addr)); >> - res = -1; >> + res = phy_id; > > Nit: > > res = -ENODEV would be a lot clearer. > Or do: > > if (phy_id < 0) { > ... > ret = phy_id; > } ... > This boils down to personal preferences. I'd like to change to the latter one if no objections. Thanks, Jason > No ? > >> + } else { >> + pm8001_device->attached_phy = phy_id; >> } >> } else { >> if (dev->dev_type == SAS_SATA_DEV) { >
On 9/28/22 11:17, Jason Yan wrote: > > On 2022/9/28 6:57, Damien Le Moal wrote: >> On 9/27/22 21:39, Jason Yan wrote: >>> The attached phy id finding is open coded. Now we can replace it with >>> sas_find_attached_phy_id(). To keep consistent, the return value of >>> pm8001_dev_found_notify() is also changed to -ENODEV after calling >>> sas_find_attathed_phy_id() failed. >>> >>> Signed-off-by: Jason Yan <yanaijie@huawei.com> >>> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> >>> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> >>> --- >>> drivers/scsi/pm8001/pm8001_sas.c | 18 ++++++------------ >>> 1 file changed, 6 insertions(+), 12 deletions(-) >>> >>> diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c >>> index 8e3f2f9ddaac..042c0843de1a 100644 >>> --- a/drivers/scsi/pm8001/pm8001_sas.c >>> +++ b/drivers/scsi/pm8001/pm8001_sas.c >>> @@ -645,22 +645,16 @@ static int pm8001_dev_found_notify(struct domain_device *dev) >>> pm8001_device->dcompletion = &completion; >>> if (parent_dev && dev_is_expander(parent_dev->dev_type)) { >>> int phy_id; >>> - struct ex_phy *phy; >>> - for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys; >>> - phy_id++) { >>> - phy = &parent_dev->ex_dev.ex_phy[phy_id]; >>> - if (SAS_ADDR(phy->attached_sas_addr) >>> - == SAS_ADDR(dev->sas_addr)) { >>> - pm8001_device->attached_phy = phy_id; >>> - break; >>> - } >>> - } >>> - if (phy_id == parent_dev->ex_dev.num_phys) { >>> + >>> + phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev); >>> + if (phy_id == -ENODEV) { >>> pm8001_dbg(pm8001_ha, FAIL, >>> "Error: no attached dev:%016llx at ex:%016llx.\n", >>> SAS_ADDR(dev->sas_addr), >>> SAS_ADDR(parent_dev->sas_addr)); >>> - res = -1; >>> + res = phy_id; >> >> Nit: >> >> res = -ENODEV would be a lot clearer. >> Or do: >> >> if (phy_id < 0) { >> ... >> ret = phy_id; >> } ... >> > > This boils down to personal preferences. I'd like to change to the > latter one if no objections. Either work for me. The point is to preferably have something consistent with the return value from sas_find_attached_phy_id() and not playing games with it. So yes, the second one is fine. > > Thanks, > Jason > >> No ? >> >>> + } else { >>> + pm8001_device->attached_phy = phy_id; >>> } >>> } else { >>> if (dev->dev_type == SAS_SATA_DEV) { >>
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 8e3f2f9ddaac..042c0843de1a 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -645,22 +645,16 @@ static int pm8001_dev_found_notify(struct domain_device *dev) pm8001_device->dcompletion = &completion; if (parent_dev && dev_is_expander(parent_dev->dev_type)) { int phy_id; - struct ex_phy *phy; - for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys; - phy_id++) { - phy = &parent_dev->ex_dev.ex_phy[phy_id]; - if (SAS_ADDR(phy->attached_sas_addr) - == SAS_ADDR(dev->sas_addr)) { - pm8001_device->attached_phy = phy_id; - break; - } - } - if (phy_id == parent_dev->ex_dev.num_phys) { + + phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev); + if (phy_id == -ENODEV) { pm8001_dbg(pm8001_ha, FAIL, "Error: no attached dev:%016llx at ex:%016llx.\n", SAS_ADDR(dev->sas_addr), SAS_ADDR(parent_dev->sas_addr)); - res = -1; + res = phy_id; + } else { + pm8001_device->attached_phy = phy_id; } } else { if (dev->dev_type == SAS_SATA_DEV) {