diff mbox series

[2/4] dts: synquacer: Use generic node names

Message ID 20221206-synquacer-dts-v1-2-73eb52e391e9@kernel.org
State Accepted
Commit cc891c41f2c8a70351da69028df8d262004044e0
Headers show
Series Synquacer DT schema fixes | expand

Commit Message

Rob Herring Dec. 6, 2022, 4:16 p.m. UTC
DT node names should follow generic names defined in the DT spec. These
are also now checked by dtschema tools.

Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi |  2 +-
 arch/arm/dts/synquacer-sc2a11-developerbox.dts         |  2 +-
 arch/arm/dts/synquacer-sc2a11.dtsi                     | 10 +++++-----
 3 files changed, 7 insertions(+), 7 deletions(-)

Comments

Tom Rini Jan. 3, 2023, 3:41 p.m. UTC | #1
On Tue, Dec 06, 2022 at 10:16:30AM -0600, Rob Herring wrote:

> DT node names should follow generic names defined in the DT spec. These
> are also now checked by dtschema tools.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>

Applied to u-boot/next, thanks!
diff mbox series

Patch

diff --git a/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
index 7a56116d6f12..6b85c05458d4 100644
--- a/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
+++ b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
@@ -23,7 +23,7 @@ 
 		active_clk_edges;
 		chipselect_num = <1>;
 
-		spi-flash@0 {
+		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "jedec,spi-nor";
diff --git a/arch/arm/dts/synquacer-sc2a11-developerbox.dts b/arch/arm/dts/synquacer-sc2a11-developerbox.dts
index 42b6cbbb8251..c8087b99a781 100644
--- a/arch/arm/dts/synquacer-sc2a11-developerbox.dts
+++ b/arch/arm/dts/synquacer-sc2a11-developerbox.dts
@@ -18,7 +18,7 @@ 
         compatible = "gpio-keys";
         interrupt-parent = <&exiu>;
 
-        power {
+        power-button {
             label = "Power Button";
             linux,code = <KEY_POWER>;
             interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/dts/synquacer-sc2a11.dtsi b/arch/arm/dts/synquacer-sc2a11.dtsi
index 1f8cd9d25780..0e1bc164549f 100644
--- a/arch/arm/dts/synquacer-sc2a11.dtsi
+++ b/arch/arm/dts/synquacer-sc2a11.dtsi
@@ -344,7 +344,7 @@ 
         interrupt-controller;
         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
 
-        its: gic-its@30020000 {
+        its: msi-controller@30020000 {
             compatible = "arm,gic-v3-its";
             reg = <0x0 0x30020000 0x0 0x20000>;
             #msi-cells = <1>;
@@ -361,7 +361,7 @@ 
                      <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;   // HYP
     };
 
-    mmio-timer@2a810000 {
+    timer@2a810000 {
         compatible = "arm,armv7-timer-mem";
         reg = <0x0 0x2a810000 0x0 0x10000>;
         #address-cells = <2>;
@@ -398,7 +398,7 @@ 
         clock-output-names = "apb_pclk";
     };
 
-    soc_uart0: uart@2a400000 {
+    soc_uart0: serial@2a400000 {
         compatible = "arm,pl011", "arm,primecell";
         reg = <0x0 0x2a400000 0x0 0x1000>;
         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,7 +406,7 @@ 
         clock-names = "uartclk", "apb_pclk";
     };
 
-    fuart: uart@51040000 {
+    fuart: serial@51040000 {
         compatible = "snps,dw-apb-uart";
         reg = <0x0 0x51040000 0x0 0x1000>;
         interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
@@ -523,7 +523,7 @@ 
         clock-output-names = "sd_sd4clk";
     };
 
-    sdhci: sdhci@52300000 {
+    sdhci: mmc@52300000 {
         compatible = "socionext,synquacer-sdhci", "fujitsu,mb86s70-sdhci-3.0";
         reg = <0 0x52300000 0x0 0x1000>;
         interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,