diff mbox series

dt-bindings: pinctrl: Drop unneeded quotes

Message ID 20230317233623.3968172-1-robh@kernel.org
State Superseded
Headers show
Series dt-bindings: pinctrl: Drop unneeded quotes | expand

Commit Message

Rob Herring March 17, 2023, 11:36 p.m. UTC
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/actions,s500-pinctrl.yaml         |  2 +-
 .../bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  2 +-
 .../devicetree/bindings/pinctrl/apple,pinctrl.yaml     |  2 +-
 .../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml       |  4 ++--
 .../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml       |  4 ++--
 .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml       |  6 +++---
 .../bindings/pinctrl/brcm,bcm6318-pinctrl.yaml         |  2 +-
 .../bindings/pinctrl/brcm,bcm63268-pinctrl.yaml        |  2 +-
 .../bindings/pinctrl/brcm,bcm6328-pinctrl.yaml         |  2 +-
 .../bindings/pinctrl/brcm,bcm6358-pinctrl.yaml         |  2 +-
 .../bindings/pinctrl/brcm,bcm6362-pinctrl.yaml         |  2 +-
 .../bindings/pinctrl/brcm,bcm6368-pinctrl.yaml         |  2 +-
 .../devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml    |  2 +-
 .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml |  2 +-
 .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml  |  2 +-
 .../devicetree/bindings/pinctrl/cirrus,madera.yaml     |  4 ++--
 .../devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml  |  2 +-
 .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml |  2 +-
 .../devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml |  2 +-
 .../bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml          |  2 +-
 .../devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml |  2 +-
 .../devicetree/bindings/pinctrl/ingenic,pinctrl.yaml   |  2 +-
 .../devicetree/bindings/pinctrl/intel,lgm-io.yaml      |  2 +-
 .../bindings/pinctrl/marvell,ac5-pinctrl.yaml          |  4 ++--
 .../bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml      |  4 ++--
 .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml      |  4 ++--
 .../bindings/pinctrl/mediatek,mt7622-pinctrl.yaml      |  6 +++---
 .../bindings/pinctrl/mediatek,mt7986-pinctrl.yaml      |  6 +++---
 .../bindings/pinctrl/mediatek,mt8183-pinctrl.yaml      |  4 ++--
 .../bindings/pinctrl/mediatek,mt8188-pinctrl.yaml      |  2 +-
 .../bindings/pinctrl/mediatek,pinctrl-mt6795.yaml      |  4 ++--
 .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml          |  6 +++---
 .../devicetree/bindings/pinctrl/pinctrl-mt8186.yaml    |  2 +-
 .../devicetree/bindings/pinctrl/pinctrl-mt8192.yaml    |  4 ++--
 .../devicetree/bindings/pinctrl/pinctrl-mt8195.yaml    |  4 ++--
 .../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml    |  4 ++--
 .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml     |  4 ++--
 .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml         |  2 +-
 .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml         |  2 +-
 .../devicetree/bindings/pinctrl/qcom,tlmm-common.yaml  |  2 +-
 .../bindings/pinctrl/ralink,mt7620-pinctrl.yaml        |  2 +-
 .../bindings/pinctrl/ralink,mt7621-pinctrl.yaml        |  2 +-
 .../bindings/pinctrl/ralink,rt2880-pinctrl.yaml        |  2 +-
 .../bindings/pinctrl/ralink,rt305x-pinctrl.yaml        |  2 +-
 .../bindings/pinctrl/ralink,rt3883-pinctrl.yaml        |  2 +-
 .../devicetree/bindings/pinctrl/renesas,pfc.yaml       |  2 +-
 .../bindings/pinctrl/renesas,rza1-ports.yaml           |  2 +-
 .../bindings/pinctrl/renesas,rza2-pinctrl.yaml         |  2 +-
 .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml        |  2 +-
 .../bindings/pinctrl/renesas,rzn1-pinctrl.yaml         |  2 +-
 .../bindings/pinctrl/renesas,rzv2m-pinctrl.yaml        |  2 +-
 .../devicetree/bindings/pinctrl/rockchip,pinctrl.yaml  | 10 +++++-----
 .../devicetree/bindings/pinctrl/samsung,pinctrl.yaml   |  2 +-
 .../devicetree/bindings/pinctrl/semtech,sx1501q.yaml   |  6 +++---
 .../bindings/pinctrl/socionext,uniphier-pinctrl.yaml   |  2 +-
 .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml  | 10 +++++-----
 .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml      |  6 +++---
 .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml       |  6 +++---
 .../bindings/pinctrl/toshiba,visconti-pinctrl.yaml     |  8 ++++----
 .../devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml |  2 +-
 60 files changed, 97 insertions(+), 97 deletions(-)

Comments

Hector Martin March 19, 2023, 5:44 a.m. UTC | #1
On 18/03/2023 08.36, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../bindings/pinctrl/actions,s500-pinctrl.yaml         |  2 +-
>  .../bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml  |  2 +-
>  .../devicetree/bindings/pinctrl/apple,pinctrl.yaml     |  2 +-
>  .../bindings/pinctrl/aspeed,ast2400-pinctrl.yaml       |  4 ++--
>  .../bindings/pinctrl/aspeed,ast2500-pinctrl.yaml       |  4 ++--
>  .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml       |  6 +++---
>  .../bindings/pinctrl/brcm,bcm6318-pinctrl.yaml         |  2 +-
>  .../bindings/pinctrl/brcm,bcm63268-pinctrl.yaml        |  2 +-
>  .../bindings/pinctrl/brcm,bcm6328-pinctrl.yaml         |  2 +-
>  .../bindings/pinctrl/brcm,bcm6358-pinctrl.yaml         |  2 +-
>  .../bindings/pinctrl/brcm,bcm6362-pinctrl.yaml         |  2 +-
>  .../bindings/pinctrl/brcm,bcm6368-pinctrl.yaml         |  2 +-
>  .../devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml    |  2 +-
>  .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml |  2 +-
>  .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml  |  2 +-
>  .../devicetree/bindings/pinctrl/cirrus,madera.yaml     |  4 ++--
>  .../devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml  |  2 +-
>  .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml |  2 +-
>  .../devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml |  2 +-
>  .../bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml          |  2 +-
>  .../devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml |  2 +-
>  .../devicetree/bindings/pinctrl/ingenic,pinctrl.yaml   |  2 +-
>  .../devicetree/bindings/pinctrl/intel,lgm-io.yaml      |  2 +-
>  .../bindings/pinctrl/marvell,ac5-pinctrl.yaml          |  4 ++--
>  .../bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml      |  4 ++--
>  .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml      |  4 ++--
>  .../bindings/pinctrl/mediatek,mt7622-pinctrl.yaml      |  6 +++---
>  .../bindings/pinctrl/mediatek,mt7986-pinctrl.yaml      |  6 +++---
>  .../bindings/pinctrl/mediatek,mt8183-pinctrl.yaml      |  4 ++--
>  .../bindings/pinctrl/mediatek,mt8188-pinctrl.yaml      |  2 +-
>  .../bindings/pinctrl/mediatek,pinctrl-mt6795.yaml      |  4 ++--
>  .../bindings/pinctrl/mscc,ocelot-pinctrl.yaml          |  6 +++---
>  .../devicetree/bindings/pinctrl/pinctrl-mt8186.yaml    |  2 +-
>  .../devicetree/bindings/pinctrl/pinctrl-mt8192.yaml    |  4 ++--
>  .../devicetree/bindings/pinctrl/pinctrl-mt8195.yaml    |  4 ++--
>  .../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml    |  4 ++--
>  .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml     |  4 ++--
>  .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml         |  2 +-
>  .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml         |  2 +-
>  .../devicetree/bindings/pinctrl/qcom,tlmm-common.yaml  |  2 +-
>  .../bindings/pinctrl/ralink,mt7620-pinctrl.yaml        |  2 +-
>  .../bindings/pinctrl/ralink,mt7621-pinctrl.yaml        |  2 +-
>  .../bindings/pinctrl/ralink,rt2880-pinctrl.yaml        |  2 +-
>  .../bindings/pinctrl/ralink,rt305x-pinctrl.yaml        |  2 +-
>  .../bindings/pinctrl/ralink,rt3883-pinctrl.yaml        |  2 +-
>  .../devicetree/bindings/pinctrl/renesas,pfc.yaml       |  2 +-
>  .../bindings/pinctrl/renesas,rza1-ports.yaml           |  2 +-
>  .../bindings/pinctrl/renesas,rza2-pinctrl.yaml         |  2 +-
>  .../bindings/pinctrl/renesas,rzg2l-pinctrl.yaml        |  2 +-
>  .../bindings/pinctrl/renesas,rzn1-pinctrl.yaml         |  2 +-
>  .../bindings/pinctrl/renesas,rzv2m-pinctrl.yaml        |  2 +-
>  .../devicetree/bindings/pinctrl/rockchip,pinctrl.yaml  | 10 +++++-----
>  .../devicetree/bindings/pinctrl/samsung,pinctrl.yaml   |  2 +-
>  .../devicetree/bindings/pinctrl/semtech,sx1501q.yaml   |  6 +++---
>  .../bindings/pinctrl/socionext,uniphier-pinctrl.yaml   |  2 +-
>  .../devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml  | 10 +++++-----
>  .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml      |  6 +++---
>  .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml       |  6 +++---
>  .../bindings/pinctrl/toshiba,visconti-pinctrl.yaml     |  8 ++++----
>  .../devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml |  2 +-
>  60 files changed, 97 insertions(+), 97 deletions(-)
> 

For apple:
Acked-by: Hector Martin <marcan@marcan.st>

> diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> index fb0f69ce9c16..7cb8a747feee 100644
> --- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> @@ -185,7 +185,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> index 1e3c8de6cae1..467016cbb037 100644
> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
> @@ -142,7 +142,7 @@ allOf:
>    # boards are defining it at the moment so it would generate a lot of
>    # warnings.
>  
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>    - if:
>        not:
>          properties:
> diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> index d3b11351ca45..9b4e0ae61ffe 100644
> --- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> @@ -73,7 +73,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> index f4f1ee6b116e..bef85c25cdef 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
> @@ -32,7 +32,7 @@ patternProperties:
>      then:
>        patternProperties:
>          "^function|groups$":
> -          $ref: "/schemas/types.yaml#/definitions/string"
> +          $ref: /schemas/types.yaml#/definitions/string
>            enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
>                    ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
>                    EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
> @@ -51,7 +51,7 @@ patternProperties:
>                    VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> index 8168f0088471..14c391f16899 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
> @@ -44,7 +44,7 @@ patternProperties:
>      then:
>        patternProperties:
>          "^function|groups$":
> -          $ref: "/schemas/types.yaml#/definitions/string"
> +          $ref: /schemas/types.yaml#/definitions/string
>            enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
>                    ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
>                    ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
> @@ -65,7 +65,7 @@ patternProperties:
>                    VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> index 62424c42c981..859a1889dc1e 100644
> --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
> @@ -30,7 +30,7 @@ patternProperties:
>      then:
>        properties:
>          function:
> -          $ref: "/schemas/types.yaml#/definitions/string"
> +          $ref: /schemas/types.yaml#/definitions/string
>            enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
>                    ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
>                    FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
> @@ -55,7 +55,7 @@ patternProperties:
>                    USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
>  
>          groups:
> -          $ref: "/schemas/types.yaml#/definitions/string"
> +          $ref: /schemas/types.yaml#/definitions/string
>            enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
>                    ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
>                    EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
> @@ -84,7 +84,7 @@ patternProperties:
>                    WDTRST3, WDTRST4]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
> index ab019a1998e8..4478a76171f7 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
> @@ -38,7 +38,7 @@ patternProperties:
>                  gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
> index 8c9d4668c8c4..73e1caa7c011 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
> @@ -42,7 +42,7 @@ patternProperties:
>                  vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> index a8e22ec02215..2750ba42aeb8 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> @@ -37,7 +37,7 @@ patternProperties:
>                  usb_port1 ]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
> index 35867355a47a..2f6c540498bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
> @@ -35,7 +35,7 @@ patternProperties:
>                  led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
> index b584d4b27223..b3044f805753 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
> @@ -42,7 +42,7 @@ patternProperties:
>                  gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
> index 229323d9237d..3236871827df 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
> @@ -43,7 +43,7 @@ patternProperties:
>                  gpio31, uart1_grp ]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
> index 8d1e5b1cdd5f..0a39dd26ee1a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
> @@ -53,7 +53,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>    - if:
>        properties:
>          compatible:
> diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
> index a78cb2796001..7f4f36a58e56 100644
> --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
> @@ -144,7 +144,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
> index 5cd512b7d5ba..5e000b3fadde 100644
> --- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
> @@ -173,7 +173,7 @@ properties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
> index 6bd42e43cdab..bb61a30321a1 100644
> --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
> @@ -40,8 +40,8 @@ properties:
>        '-pins$':
>          type: object
>          allOf:
> -          - $ref: "pincfg-node.yaml#"
> -          - $ref: "pinmux-node.yaml#"
> +          - $ref: pincfg-node.yaml#
> +          - $ref: pinmux-node.yaml#
>          properties:
>            groups:
>              description:
> diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
> index 915cbbcc3555..222d57541b65 100644
> --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
> @@ -109,7 +109,7 @@ required:
>  additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
> index 621038662188..7bd723ab1281 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
> @@ -68,7 +68,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> index 7ae084397258..6068be11dfe2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> @@ -65,7 +65,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
> index 693398d88223..7dcf681271d3 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
> @@ -57,7 +57,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
> index 66baa6082a4f..2f2405102996 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
> @@ -14,7 +14,7 @@ description:
>    for common binding part and usage.
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
> index a4397930e0e8..35723966b70a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
> @@ -119,7 +119,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
> index ca0fef6e535e..1144ca2896e3 100644
> --- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
> @@ -48,7 +48,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
> index 491f67e7cc4f..afea9424c7e1 100644
> --- a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
> @@ -28,7 +28,7 @@ patternProperties:
>  
>      properties:
>        marvell,function:
> -        $ref: "/schemas/types.yaml#/definitions/string"
> +        $ref: /schemas/types.yaml#/definitions/string
>          description:
>            Indicates the function to select.
>          enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio,
> @@ -47,7 +47,7 @@ patternProperties:
>                    mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ]
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> index a55c8e4ff26e..b903126bb9be 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
> @@ -67,7 +67,7 @@ required:
>    - "#gpio-cells"
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  patternProperties:
>    'pins$':
> @@ -83,7 +83,7 @@ patternProperties:
>            pins it needs, and how they should be configured, with regard to muxer
>            configuration, pullups, drive strength, input enable/disable and input
>            schmitt.
> -        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>          properties:
>            pinmux:
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> index a2141eb0854e..9bb563cea1a8 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> @@ -58,7 +58,7 @@ required:
>    - "#gpio-cells"
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>    - if:
>        properties:
>          compatible:
> @@ -123,7 +123,7 @@ patternProperties:
>            pinctrl groups available on the machine. Each subnode will list the
>            pins it needs, and how they should be configured, with regard to muxer
>            configuration, pullups, drive strength, input enable/disable and input schmitt.
> -        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>          properties:
>            pinmux:
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
> index ac93eb8f01a6..37f8666e258b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
> @@ -43,7 +43,7 @@ properties:
>      const: 2
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> @@ -70,7 +70,7 @@ patternProperties:
>          additionalProperties: false
>          description: |
>            pinmux configuration nodes.
> -        $ref: "/schemas/pinctrl/pinmux-node.yaml"
> +        $ref: /schemas/pinctrl/pinmux-node.yaml
>          properties:
>            function:
>              description: |
> @@ -249,7 +249,7 @@ patternProperties:
>          additionalProperties: false
>          description: |
>            pinconf configuration nodes.
> -        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>          properties:
>            groups:
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> index 216b356cd519..275ed99f78d2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> @@ -57,7 +57,7 @@ properties:
>      const: 2
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> @@ -126,7 +126,7 @@ patternProperties:
>            "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
>                                          84, 85
>  
> -        $ref: "/schemas/pinctrl/pinmux-node.yaml"
> +        $ref: /schemas/pinctrl/pinmux-node.yaml
>          properties:
>            function:
>              description: |
> @@ -260,7 +260,7 @@ patternProperties:
>          additionalProperties: false
>          description: |
>            pinconf configuration nodes.
> -        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>          properties:
>            pins:
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
> index c30cd0d010dd..5f7d3113a83a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
> @@ -57,7 +57,7 @@ properties:
>      const: 2
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> @@ -80,7 +80,7 @@ patternProperties:
>            pins it needs, and how they should be configured, with regard to muxer
>            configuration, pullups, drive strength, input enable/disable and input
>            schmitt.
> -        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>          properties:
>            pinmux:
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
> index 7e750f1e643d..941d38752431 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
> @@ -73,7 +73,7 @@ patternProperties:
>      patternProperties:
>        '^pins':
>          type: object
> -        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
>          additionalProperties: false
>          description: |
>            A pinctrl node should contain at least one subnode representing the
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
> index 9399e0215526..50f0d5b59e12 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
> @@ -82,7 +82,7 @@ patternProperties:
>                }
>              };
>            };
> -        $ref: "pinmux-node.yaml"
> +        $ref: pinmux-node.yaml
>  
>          properties:
>            pinmux:
> @@ -155,7 +155,7 @@ patternProperties:
>            - pinmux
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
> index 98d547c34ef3..dbb3e1bd58c1 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
> @@ -54,8 +54,8 @@ patternProperties:
>    '-pins$':
>      type: object
>      allOf:
> -      - $ref: "pinmux-node.yaml"
> -      - $ref: "pincfg-node.yaml"
> +      - $ref: pinmux-node.yaml
> +      - $ref: pincfg-node.yaml
>  
>      properties:
>        function: true
> @@ -78,7 +78,7 @@ required:
>    - gpio-ranges
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>    - if:
>        properties:
>          compatible:
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
> index 26573a793b57..d5175001b6f0 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
> @@ -94,7 +94,7 @@ patternProperties:
>                }
>              };
>            };
> -        $ref: "pinmux-node.yaml"
> +        $ref: pinmux-node.yaml
>  
>          properties:
>            pinmux:
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
> index a09ebbfec574..3fd20f07bf0f 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
> @@ -65,7 +65,7 @@ patternProperties:
>            pins it needs, and how they should be configured, with regard to muxer
>            configuration, pullups, drive strength, input enable/disable and
>            input schmitt.
> -        $ref: "pinmux-node.yaml"
> +        $ref: pinmux-node.yaml
>  
>          properties:
>            pinmux:
> @@ -125,7 +125,7 @@ patternProperties:
>          additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> index 66fe17e9e4d3..a8703a5c386b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> @@ -87,7 +87,7 @@ patternProperties:
>                }
>              };
>            };
> -        $ref: "pinmux-node.yaml"
> +        $ref: pinmux-node.yaml
>  
>          properties:
>            pinmux:
> @@ -217,7 +217,7 @@ patternProperties:
>            - pinmux
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> index db505fdeac86..1096655961f7 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
> @@ -395,8 +395,8 @@ $defs:
>    qcom-pmic-gpio-state:
>      type: object
>      allOf:
> -      - $ref: "pinmux-node.yaml"
> -      - $ref: "pincfg-node.yaml"
> +      - $ref: pinmux-node.yaml
> +      - $ref: pincfg-node.yaml
>      properties:
>        pins:
>          description:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> index 9412b9362328..c91d3e3a094b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
> @@ -82,8 +82,8 @@ $defs:
>    qcom-pmic-mpp-state:
>      type: object
>      allOf:
> -      - $ref: "pinmux-node.yaml"
> -      - $ref: "pincfg-node.yaml"
> +      - $ref: pinmux-node.yaml
> +      - $ref: pincfg-node.yaml
>      properties:
>        pins:
>          description:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
> index e51feb4c0700..fa51fa9536f7 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
> @@ -50,7 +50,7 @@ $defs:
>      description:
>        Pinctrl node's client devices use subnodes for desired pin configuration.
>        Client device subnodes use below standard properties.
> -    $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +    $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>      properties:
>        pins:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
> index de9d8854c690..4b4be7efc150 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
> @@ -55,7 +55,7 @@ $defs:
>      description:
>        Pinctrl node's client devices use subnodes for desired pin configuration.
>        Client device subnodes use below standard properties.
> -    $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +    $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>      properties:
>        pins:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
> index cb5ba1bd6f8d..2da1437358b7 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
> @@ -52,7 +52,7 @@ properties:
>        information.
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - interrupts
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> index 1e63ea34146a..19d741c09cb2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
> @@ -637,7 +637,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
> index 1b1d37b981d9..39d04621b4f9 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
> @@ -241,7 +241,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> index 7fd0df880a76..7fb42ba9a7c1 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
> @@ -121,7 +121,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
> index 4d66ca752a30..02780dcc38f2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
> @@ -254,7 +254,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
> index 008d93181aea..ec5b38415dcd 100644
> --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
> @@ -241,7 +241,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> index 4fc758fea7e6..0fc3c0f52c19 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
> @@ -73,7 +73,7 @@ properties:
>      maxItems: 1
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> index 9083040c996a..83800fcf0ce4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
> @@ -32,7 +32,7 @@ properties:
>      maxItems: 1
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
> index d761fddc2206..37173a64fed2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
> @@ -73,7 +73,7 @@ patternProperties:
>        additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> index f081acb7ba04..9ce1a07fc015 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> @@ -113,7 +113,7 @@ additionalProperties:
>          $ref: "#/additionalProperties/anyOf/0"
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
> index 70b1788ab594..f3b85b7eae31 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
> @@ -32,7 +32,7 @@ properties:
>        The bus clock, sometimes described as pclk, for register accesses.
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> index eac6245db7dc..03f084292d68 100644
> --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
> @@ -94,7 +94,7 @@ additionalProperties:
>          $ref: "#/additionalProperties/anyOf/0"
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> index 45b767986a87..10c335efe619 100644
> --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> @@ -50,12 +50,12 @@ properties:
>        - rockchip,rv1126-pinctrl
>  
>    rockchip,grf:
> -    $ref: "/schemas/types.yaml#/definitions/phandle"
> +    $ref: /schemas/types.yaml#/definitions/phandle
>      description:
>        The phandle of the syscon node for the GRF registers.
>  
>    rockchip,pmu:
> -    $ref: "/schemas/types.yaml#/definitions/phandle"
> +    $ref: /schemas/types.yaml#/definitions/phandle
>      description:
>        The phandle of the syscon node for the PMU registers,
>        as some SoCs carry parts of the iomux controller registers there.
> @@ -71,7 +71,7 @@ properties:
>    ranges: true
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> @@ -81,7 +81,7 @@ patternProperties:
>    "gpio@[0-9a-f]+$":
>      type: object
>  
> -    $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#"
> +    $ref: /schemas/gpio/rockchip,gpio-bank.yaml#
>      deprecated: true
>  
>      unevaluatedProperties: false
> @@ -117,7 +117,7 @@ additionalProperties:
>      type: object
>      properties:
>        rockchip,pins:
> -        $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
>          minItems: 1
>          items:
>            items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> index eb2b2692607d..26614621774a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
> @@ -117,7 +117,7 @@ required:
>    - reg
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>    - if:
>        properties:
>          compatible:
> diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
> index 0719c03d6f4b..4214d7311f6b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
> @@ -62,8 +62,8 @@ patternProperties:
>        - pins
>  
>      allOf:
> -      - $ref: "pincfg-node.yaml#"
> -      - $ref: "pinmux-node.yaml#"
> +      - $ref: pincfg-node.yaml#
> +      - $ref: pinmux-node.yaml#
>        - if:
>            properties:
>              pins:
> @@ -86,7 +86,7 @@ required:
>    - gpio-controller
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>    - if:
>        not:
>          properties:
> diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> index bc34e2c872bc..a6f34df82e90 100644
> --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
> @@ -61,7 +61,7 @@ additionalProperties:
>      unevaluatedProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> index eeb29b4ad4d1..1ab0f8dde477 100644
> --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> @@ -44,7 +44,7 @@ properties:
>  
>    st,syscfg:
>      description: Phandle+args to the syscon node which includes IRQ mux selection.
> -    $ref: "/schemas/types.yaml#/definitions/phandle-array"
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>      items:
>        - items:
>            - description: syscon node which includes IRQ mux selection
> @@ -89,7 +89,7 @@ patternProperties:
>        st,bank-name:
>          description:
>            Should be a name string for this bank as specified in the datasheet.
> -        $ref: "/schemas/types.yaml#/definitions/string"
> +        $ref: /schemas/types.yaml#/definitions/string
>          enum:
>            - GPIOA
>            - GPIOB
> @@ -108,7 +108,7 @@ patternProperties:
>          description:
>            Should correspond to the EXTI IOport selection (EXTI line used
>            to select GPIOs as interrupts).
> -        $ref: "/schemas/types.yaml#/definitions/uint32"
> +        $ref: /schemas/types.yaml#/definitions/uint32
>          minimum: 0
>          maximum: 11
>  
> @@ -140,7 +140,7 @@ patternProperties:
>            configuration, pullups, drive, output high/low and output speed.
>          properties:
>            pinmux:
> -            $ref: "/schemas/types.yaml#/definitions/uint32-array"
> +            $ref: /schemas/types.yaml#/definitions/uint32-array
>              description: |
>                Integer array, represents gpio pin number and mux setting.
>                Supported pin number and mux varies for different SoCs, and are
> @@ -201,7 +201,7 @@ patternProperties:
>            - pinmux
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
> index 69c0dd9998ea..27eff891685b 100644
> --- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
> @@ -111,7 +111,7 @@ patternProperties:
>            pins it needs, and how they should be configured, with regard to
>            muxer configuration, bias, input enable/disable, input schmitt
>            trigger enable/disable, slew-rate and drive strength.
> -        $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +        $ref: /schemas/pinctrl/pincfg-node.yaml
>  
>          properties:
>            pins:
> @@ -120,14 +120,14 @@ patternProperties:
>                This should be set using either the PAD_GPIO or PAD_FUNC_SHARE
>                macros.
>                Either this or "pinmux" has to be specified, but not both.
> -            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins"
> +            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins
>  
>            pinmux:
>              description: |
>                The list of GPIOs and their mux settings that properties in the
>                node apply to. This should be set using the GPIOMUX macro.
>                Either this or "pins" has to be specified, but not both.
> -            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux"
> +            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
>  
>            bias-disable: true
>  
> diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> index 347061eece9e..94b868c7ceb1 100644
> --- a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> @@ -138,7 +138,7 @@ patternProperties:
>          description: |
>            Define pin-function which is used by pinctrl node's client device.
>            The name should be one of string in the following enumeration.
> -        $ref: "/schemas/types.yaml#/definitions/string"
> +        $ref: /schemas/types.yaml#/definitions/string
>          enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
>                  UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
>  
> @@ -146,7 +146,7 @@ patternProperties:
>          description: |
>            Define pin-group in a specified pin-function.
>            The name should be one of string in the following enumeration.
> -        $ref: "/schemas/types.yaml#/definitions/string"
> +        $ref: /schemas/types.yaml#/definitions/string
>          enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
>                  SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
>                  HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
> @@ -289,7 +289,7 @@ required:
>  additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  examples:
>    - |
> diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
> index 98b4663f9766..19d47fd414bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
> @@ -21,7 +21,7 @@ properties:
>      maxItems: 1
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible
> @@ -35,14 +35,14 @@ patternProperties:
>        pinctrl groups available on the machine. Each subnode will list the
>        pins it needs, and how they should be configured, with regard to muxer
>        configuration, pullups, drive strength.
> -    $ref: "pinmux-node.yaml"
> +    $ref: pinmux-node.yaml
>      additionalProperties: false
>  
>      properties:
>        function:
>          description:
>            Function to mux.
> -        $ref: "/schemas/types.yaml#/definitions/string"
> +        $ref: /schemas/types.yaml#/definitions/string
>          enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
>                 spi0, spi1, spi2, spi3, spi4, spi5, spi6,
>                 uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
> @@ -50,7 +50,7 @@ patternProperties:
>        groups:
>          description:
>            Name of the pin group to use for the functions.
> -        $ref: "/schemas/types.yaml#/definitions/string"
> +        $ref: /schemas/types.yaml#/definitions/string
>          enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
>                 i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
>                 spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
> diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
> index cfd0cc549a7b..598a042850b8 100644
> --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
> @@ -168,7 +168,7 @@ patternProperties:
>      additionalProperties: false
>  
>  allOf:
> -  - $ref: "pinctrl.yaml#"
> +  - $ref: pinctrl.yaml#
>  
>  required:
>    - compatible


- Hector
Linus Walleij March 19, 2023, 9:14 p.m. UTC | #2
On Sat, Mar 18, 2023 at 12:36 AM Rob Herring <robh@kernel.org> wrote:

> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <robh@kernel.org>

Less bad examples = good.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Linus Walleij March 23, 2023, 8:39 a.m. UTC | #3
On Sat, Mar 18, 2023 at 12:36 AM Rob Herring <robh@kernel.org> wrote:

> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <robh@kernel.org>

Should I queue this patch by the way, or do you need it to go into some
DT-related tree?

Yours,
Linus Walleij
Rob Herring March 24, 2023, 2:33 p.m. UTC | #4
On Thu, Mar 23, 2023 at 3:40 AM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> On Sat, Mar 18, 2023 at 12:36 AM Rob Herring <robh@kernel.org> wrote:
>
> > Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> > checking for this can be enabled in yamllint.
> >
> > Signed-off-by: Rob Herring <robh@kernel.org>
>
> Should I queue this patch by the way, or do you need it to go into some
> DT-related tree?

Stands on its own. You can take it.

Rob
Linus Walleij March 27, 2023, 9:52 p.m. UTC | #5
On Fri, Mar 24, 2023 at 3:33 PM Rob Herring <robh@kernel.org> wrote:
> On Thu, Mar 23, 2023 at 3:40 AM Linus Walleij <linus.walleij@linaro.org> wrote:
> > On Sat, Mar 18, 2023 at 12:36 AM Rob Herring <robh@kernel.org> wrote:
> >
> > > Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> > > checking for this can be enabled in yamllint.
> > >
> > > Signed-off-by: Rob Herring <robh@kernel.org>
> >
> > Should I queue this patch by the way, or do you need it to go into some
> > DT-related tree?
>
> Stands on its own. You can take it.

This sadly conflicts hard with my "devel" branch:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel

Cause seems to be major refactorings of Mediatek and Ralink
bindings.

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
index fb0f69ce9c16..7cb8a747feee 100644
--- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -185,7 +185,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index 1e3c8de6cae1..467016cbb037 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -142,7 +142,7 @@  allOf:
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
 
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
   - if:
       not:
         properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
index d3b11351ca45..9b4e0ae61ffe 100644
--- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
@@ -73,7 +73,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index f4f1ee6b116e..bef85c25cdef 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -32,7 +32,7 @@  patternProperties:
     then:
       patternProperties:
         "^function|groups$":
-          $ref: "/schemas/types.yaml#/definitions/string"
+          $ref: /schemas/types.yaml#/definitions/string
           enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
                   ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
                   EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
@@ -51,7 +51,7 @@  patternProperties:
                   VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 8168f0088471..14c391f16899 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -44,7 +44,7 @@  patternProperties:
     then:
       patternProperties:
         "^function|groups$":
-          $ref: "/schemas/types.yaml#/definitions/string"
+          $ref: /schemas/types.yaml#/definitions/string
           enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
                   ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
                   ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
@@ -65,7 +65,7 @@  patternProperties:
                   VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 62424c42c981..859a1889dc1e 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -30,7 +30,7 @@  patternProperties:
     then:
       properties:
         function:
-          $ref: "/schemas/types.yaml#/definitions/string"
+          $ref: /schemas/types.yaml#/definitions/string
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
                   FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
@@ -55,7 +55,7 @@  patternProperties:
                   USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
 
         groups:
-          $ref: "/schemas/types.yaml#/definitions/string"
+          $ref: /schemas/types.yaml#/definitions/string
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
                   EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
@@ -84,7 +84,7 @@  patternProperties:
                   WDTRST3, WDTRST4]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
index ab019a1998e8..4478a76171f7 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -38,7 +38,7 @@  patternProperties:
                 gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
index 8c9d4668c8c4..73e1caa7c011 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -42,7 +42,7 @@  patternProperties:
                 vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
index a8e22ec02215..2750ba42aeb8 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -37,7 +37,7 @@  patternProperties:
                 usb_port1 ]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
index 35867355a47a..2f6c540498bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -35,7 +35,7 @@  patternProperties:
                 led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
index b584d4b27223..b3044f805753 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -42,7 +42,7 @@  patternProperties:
                 gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
index 229323d9237d..3236871827df 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -43,7 +43,7 @@  patternProperties:
                 gpio31, uart1_grp ]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
index 8d1e5b1cdd5f..0a39dd26ee1a 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -53,7 +53,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
index a78cb2796001..7f4f36a58e56 100644
--- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -144,7 +144,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
index 5cd512b7d5ba..5e000b3fadde 100644
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -173,7 +173,7 @@  properties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
index 6bd42e43cdab..bb61a30321a1 100644
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -40,8 +40,8 @@  properties:
       '-pins$':
         type: object
         allOf:
-          - $ref: "pincfg-node.yaml#"
-          - $ref: "pinmux-node.yaml#"
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
         properties:
           groups:
             description:
diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
index 915cbbcc3555..222d57541b65 100644
--- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -109,7 +109,7 @@  required:
 additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
index 621038662188..7bd723ab1281 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
@@ -68,7 +68,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
index 7ae084397258..6068be11dfe2 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
@@ -65,7 +65,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
index 693398d88223..7dcf681271d3 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
@@ -57,7 +57,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
index 66baa6082a4f..2f2405102996 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
@@ -14,7 +14,7 @@  description:
   for common binding part and usage.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
index a4397930e0e8..35723966b70a 100644
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -119,7 +119,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
index ca0fef6e535e..1144ca2896e3 100644
--- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -48,7 +48,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
index 491f67e7cc4f..afea9424c7e1 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
@@ -28,7 +28,7 @@  patternProperties:
 
     properties:
       marvell,function:
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         description:
           Indicates the function to select.
         enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio,
@@ -47,7 +47,7 @@  patternProperties:
                   mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ]
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index a55c8e4ff26e..b903126bb9be 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -67,7 +67,7 @@  required:
   - "#gpio-cells"
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 patternProperties:
   'pins$':
@@ -83,7 +83,7 @@  patternProperties:
           pins it needs, and how they should be configured, with regard to muxer
           configuration, pullups, drive strength, input enable/disable and input
           schmitt.
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        $ref: /schemas/pinctrl/pincfg-node.yaml
 
         properties:
           pinmux:
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index a2141eb0854e..9bb563cea1a8 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -58,7 +58,7 @@  required:
   - "#gpio-cells"
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
   - if:
       properties:
         compatible:
@@ -123,7 +123,7 @@  patternProperties:
           pinctrl groups available on the machine. Each subnode will list the
           pins it needs, and how they should be configured, with regard to muxer
           configuration, pullups, drive strength, input enable/disable and input schmitt.
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        $ref: /schemas/pinctrl/pincfg-node.yaml
 
         properties:
           pinmux:
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index ac93eb8f01a6..37f8666e258b 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -43,7 +43,7 @@  properties:
     const: 2
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
@@ -70,7 +70,7 @@  patternProperties:
         additionalProperties: false
         description: |
           pinmux configuration nodes.
-        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        $ref: /schemas/pinctrl/pinmux-node.yaml
         properties:
           function:
             description: |
@@ -249,7 +249,7 @@  patternProperties:
         additionalProperties: false
         description: |
           pinconf configuration nodes.
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        $ref: /schemas/pinctrl/pincfg-node.yaml
 
         properties:
           groups:
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 216b356cd519..275ed99f78d2 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -57,7 +57,7 @@  properties:
     const: 2
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
@@ -126,7 +126,7 @@  patternProperties:
           "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
                                         84, 85
 
-        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        $ref: /schemas/pinctrl/pinmux-node.yaml
         properties:
           function:
             description: |
@@ -260,7 +260,7 @@  patternProperties:
         additionalProperties: false
         description: |
           pinconf configuration nodes.
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        $ref: /schemas/pinctrl/pincfg-node.yaml
 
         properties:
           pins:
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
index c30cd0d010dd..5f7d3113a83a 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -57,7 +57,7 @@  properties:
     const: 2
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
@@ -80,7 +80,7 @@  patternProperties:
           pins it needs, and how they should be configured, with regard to muxer
           configuration, pullups, drive strength, input enable/disable and input
           schmitt.
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        $ref: /schemas/pinctrl/pincfg-node.yaml
 
         properties:
           pinmux:
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
index 7e750f1e643d..941d38752431 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
@@ -73,7 +73,7 @@  patternProperties:
     patternProperties:
       '^pins':
         type: object
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        $ref: /schemas/pinctrl/pincfg-node.yaml
         additionalProperties: false
         description: |
           A pinctrl node should contain at least one subnode representing the
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
index 9399e0215526..50f0d5b59e12 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
@@ -82,7 +82,7 @@  patternProperties:
               }
             };
           };
-        $ref: "pinmux-node.yaml"
+        $ref: pinmux-node.yaml
 
         properties:
           pinmux:
@@ -155,7 +155,7 @@  patternProperties:
           - pinmux
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
index 98d547c34ef3..dbb3e1bd58c1 100644
--- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
@@ -54,8 +54,8 @@  patternProperties:
   '-pins$':
     type: object
     allOf:
-      - $ref: "pinmux-node.yaml"
-      - $ref: "pincfg-node.yaml"
+      - $ref: pinmux-node.yaml
+      - $ref: pincfg-node.yaml
 
     properties:
       function: true
@@ -78,7 +78,7 @@  required:
   - gpio-ranges
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
index 26573a793b57..d5175001b6f0 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
@@ -94,7 +94,7 @@  patternProperties:
               }
             };
           };
-        $ref: "pinmux-node.yaml"
+        $ref: pinmux-node.yaml
 
         properties:
           pinmux:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
index a09ebbfec574..3fd20f07bf0f 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -65,7 +65,7 @@  patternProperties:
           pins it needs, and how they should be configured, with regard to muxer
           configuration, pullups, drive strength, input enable/disable and
           input schmitt.
-        $ref: "pinmux-node.yaml"
+        $ref: pinmux-node.yaml
 
         properties:
           pinmux:
@@ -125,7 +125,7 @@  patternProperties:
         additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index 66fe17e9e4d3..a8703a5c386b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -87,7 +87,7 @@  patternProperties:
               }
             };
           };
-        $ref: "pinmux-node.yaml"
+        $ref: pinmux-node.yaml
 
         properties:
           pinmux:
@@ -217,7 +217,7 @@  patternProperties:
           - pinmux
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index db505fdeac86..1096655961f7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -395,8 +395,8 @@  $defs:
   qcom-pmic-gpio-state:
     type: object
     allOf:
-      - $ref: "pinmux-node.yaml"
-      - $ref: "pincfg-node.yaml"
+      - $ref: pinmux-node.yaml
+      - $ref: pincfg-node.yaml
     properties:
       pins:
         description:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 9412b9362328..c91d3e3a094b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -82,8 +82,8 @@  $defs:
   qcom-pmic-mpp-state:
     type: object
     allOf:
-      - $ref: "pinmux-node.yaml"
-      - $ref: "pincfg-node.yaml"
+      - $ref: pinmux-node.yaml
+      - $ref: pincfg-node.yaml
     properties:
       pins:
         description:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
index e51feb4c0700..fa51fa9536f7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -50,7 +50,7 @@  $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: /schemas/pinctrl/pincfg-node.yaml
 
     properties:
       pins:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index de9d8854c690..4b4be7efc150 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -55,7 +55,7 @@  $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+    $ref: /schemas/pinctrl/pincfg-node.yaml
 
     properties:
       pins:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
index cb5ba1bd6f8d..2da1437358b7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -52,7 +52,7 @@  properties:
       information.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - interrupts
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
index 1e63ea34146a..19d741c09cb2 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -637,7 +637,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
index 1b1d37b981d9..39d04621b4f9 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
@@ -241,7 +241,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
index 7fd0df880a76..7fb42ba9a7c1 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -121,7 +121,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
index 4d66ca752a30..02780dcc38f2 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -254,7 +254,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
index 008d93181aea..ec5b38415dcd 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -241,7 +241,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
index 4fc758fea7e6..0fc3c0f52c19 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -73,7 +73,7 @@  properties:
     maxItems: 1
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
index 9083040c996a..83800fcf0ce4 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -32,7 +32,7 @@  properties:
     maxItems: 1
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
index d761fddc2206..37173a64fed2 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -73,7 +73,7 @@  patternProperties:
       additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index f081acb7ba04..9ce1a07fc015 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -113,7 +113,7 @@  additionalProperties:
         $ref: "#/additionalProperties/anyOf/0"
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
index 70b1788ab594..f3b85b7eae31 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -32,7 +32,7 @@  properties:
       The bus clock, sometimes described as pclk, for register accesses.
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
index eac6245db7dc..03f084292d68 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -94,7 +94,7 @@  additionalProperties:
         $ref: "#/additionalProperties/anyOf/0"
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
index 45b767986a87..10c335efe619 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -50,12 +50,12 @@  properties:
       - rockchip,rv1126-pinctrl
 
   rockchip,grf:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       The phandle of the syscon node for the GRF registers.
 
   rockchip,pmu:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       The phandle of the syscon node for the PMU registers,
       as some SoCs carry parts of the iomux controller registers there.
@@ -71,7 +71,7 @@  properties:
   ranges: true
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
@@ -81,7 +81,7 @@  patternProperties:
   "gpio@[0-9a-f]+$":
     type: object
 
-    $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#"
+    $ref: /schemas/gpio/rockchip,gpio-bank.yaml#
     deprecated: true
 
     unevaluatedProperties: false
@@ -117,7 +117,7 @@  additionalProperties:
     type: object
     properties:
       rockchip,pins:
-        $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
         minItems: 1
         items:
           items:
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
index eb2b2692607d..26614621774a 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -117,7 +117,7 @@  required:
   - reg
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
index 0719c03d6f4b..4214d7311f6b 100644
--- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
@@ -62,8 +62,8 @@  patternProperties:
       - pins
 
     allOf:
-      - $ref: "pincfg-node.yaml#"
-      - $ref: "pinmux-node.yaml#"
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
       - if:
           properties:
             pins:
@@ -86,7 +86,7 @@  required:
   - gpio-controller
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
   - if:
       not:
         properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index bc34e2c872bc..a6f34df82e90 100644
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -61,7 +61,7 @@  additionalProperties:
     unevaluatedProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index eeb29b4ad4d1..1ab0f8dde477 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -44,7 +44,7 @@  properties:
 
   st,syscfg:
     description: Phandle+args to the syscon node which includes IRQ mux selection.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       - items:
           - description: syscon node which includes IRQ mux selection
@@ -89,7 +89,7 @@  patternProperties:
       st,bank-name:
         description:
           Should be a name string for this bank as specified in the datasheet.
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         enum:
           - GPIOA
           - GPIOB
@@ -108,7 +108,7 @@  patternProperties:
         description:
           Should correspond to the EXTI IOport selection (EXTI line used
           to select GPIOs as interrupts).
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 11
 
@@ -140,7 +140,7 @@  patternProperties:
           configuration, pullups, drive, output high/low and output speed.
         properties:
           pinmux:
-            $ref: "/schemas/types.yaml#/definitions/uint32-array"
+            $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Integer array, represents gpio pin number and mux setting.
               Supported pin number and mux varies for different SoCs, and are
@@ -201,7 +201,7 @@  patternProperties:
           - pinmux
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
index 69c0dd9998ea..27eff891685b 100644
--- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -111,7 +111,7 @@  patternProperties:
           pins it needs, and how they should be configured, with regard to
           muxer configuration, bias, input enable/disable, input schmitt
           trigger enable/disable, slew-rate and drive strength.
-        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        $ref: /schemas/pinctrl/pincfg-node.yaml
 
         properties:
           pins:
@@ -120,14 +120,14 @@  patternProperties:
               This should be set using either the PAD_GPIO or PAD_FUNC_SHARE
               macros.
               Either this or "pinmux" has to be specified, but not both.
-            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pins"
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins
 
           pinmux:
             description: |
               The list of GPIOs and their mux settings that properties in the
               node apply to. This should be set using the GPIOMUX macro.
               Either this or "pins" has to be specified, but not both.
-            $ref: "/schemas/pinctrl/pinmux-node.yaml#/properties/pinmux"
+            $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
 
           bias-disable: true
 
diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
index 347061eece9e..94b868c7ceb1 100644
--- a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
@@ -138,7 +138,7 @@  patternProperties:
         description: |
           Define pin-function which is used by pinctrl node's client device.
           The name should be one of string in the following enumeration.
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
                 UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
 
@@ -146,7 +146,7 @@  patternProperties:
         description: |
           Define pin-group in a specified pin-function.
           The name should be one of string in the following enumeration.
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
                 SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
                 HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
@@ -289,7 +289,7 @@  required:
 additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
index 98b4663f9766..19d47fd414bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -21,7 +21,7 @@  properties:
     maxItems: 1
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible
@@ -35,14 +35,14 @@  patternProperties:
       pinctrl groups available on the machine. Each subnode will list the
       pins it needs, and how they should be configured, with regard to muxer
       configuration, pullups, drive strength.
-    $ref: "pinmux-node.yaml"
+    $ref: pinmux-node.yaml
     additionalProperties: false
 
     properties:
       function:
         description:
           Function to mux.
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
                spi0, spi1, spi2, spi3, spi4, spi5, spi6,
                uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
@@ -50,7 +50,7 @@  patternProperties:
       groups:
         description:
           Name of the pin group to use for the functions.
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
                i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
                spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
index cfd0cc549a7b..598a042850b8 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -168,7 +168,7 @@  patternProperties:
     additionalProperties: false
 
 allOf:
-  - $ref: "pinctrl.yaml#"
+  - $ref: pinctrl.yaml#
 
 required:
   - compatible