@@ -594,6 +594,23 @@ config ACPI_PRMT
substantially increase computational overhead related to the
initialization of some server systems.
+config WBRF_AMD_ACPI
+ bool "ACPI based WBRF mechanism introduced by AMD"
+ depends on ACPI
+ default n
+ help
+ Wifi band RFI mitigation mechanism allows multiple drivers from
+ different domains to notify the frequencies in use so that hardware
+ can be reconfigured to avoid harmonic conflicts.
+
+ AMD has introduced an ACPI based mechanism to support WBRF for some
+ platforms with AMD dGPU and WLAN. This needs support from BIOS equipped
+ with necessary AML implementations and dGPU firmwares.
+
+ Before enabling this ACPI based mechanism, it is suggested to confirm
+ with the hardware designer/provider first whether your platform
+ equipped with necessary BIOS and firmwares.
+
endif # ACPI
config X86_PM_TIMER
@@ -133,3 +133,5 @@ obj-$(CONFIG_ARM64) += arm64/
obj-$(CONFIG_ACPI_VIOT) += viot.o
obj-$(CONFIG_RISCV) += riscv/
+
+obj-$(CONFIG_WBRF_AMD_ACPI) += amd_wbrf.o
new file mode 100644
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Wifi Band Exclusion Interface (AMD ACPI Implementation)
+ * Copyright (C) 2023 Advanced Micro Devices
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_amd_wbrf.h>
+
+#define ACPI_AMD_WBRF_METHOD "\\WBRF"
+
+/*
+ * Functions bit vector for WBRF method
+ *
+ * Bit 0: Supported for any functions other than function 0.
+ * Bit 1: Function 1 (Add / Remove frequency) is supported.
+ * Bit 2: Function 2 (Get frequency list) is supported.
+ */
+#define WBRF_ENABLED 0x0
+#define WBRF_RECORD 0x1
+#define WBRF_RETRIEVE 0x2
+
+/* record actions */
+#define WBRF_RECORD_ADD 0x0
+#define WBRF_RECORD_REMOVE 0x1
+
+#define WBRF_REVISION 0x1
+
+/*
+ * The data structure used for WBRF_RETRIEVE is not naturally aligned.
+ * And unfortunately the design has been settled down.
+ */
+struct amd_wbrf_ranges_out {
+ u32 num_of_ranges;
+ struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES];
+} __packed;
+
+static const guid_t wifi_acpi_dsm_guid =
+ GUID_INIT(0x7b7656cf, 0xdc3d, 0x4c1c,
+ 0x83, 0xe9, 0x66, 0xe7, 0x21, 0xde, 0x30, 0x70);
+
+static BLOCKING_NOTIFIER_HEAD(wbrf_chain_head);
+
+static int wbrf_dsm(struct acpi_device *adev,
+ u8 fn,
+ union acpi_object *argv4)
+{
+ union acpi_object *obj;
+ int rc;
+
+ obj = acpi_evaluate_dsm(adev->handle, &wifi_acpi_dsm_guid,
+ WBRF_REVISION, fn, argv4);
+ if (!obj)
+ return -ENXIO;
+
+ switch (obj->type) {
+ case ACPI_TYPE_INTEGER:
+ rc = obj->integer.value ? -EINVAL : 0;
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ }
+
+ ACPI_FREE(obj);
+
+ return rc;
+}
+
+static int wbrf_record(struct acpi_device *adev, uint8_t action,
+ struct wbrf_ranges_in_out *in)
+{
+ union acpi_object argv4;
+ union acpi_object *tmp;
+ u32 num_of_ranges = 0;
+ u32 num_of_elements;
+ u32 arg_idx = 0;
+ u32 loop_idx;
+ int ret;
+
+ if (!in)
+ return -EINVAL;
+
+ for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list);
+ loop_idx++)
+ if (in->band_list[loop_idx].start &&
+ in->band_list[loop_idx].end)
+ num_of_ranges++;
+
+ /*
+ * The valid entry counter does not match with this told.
+ * Something must went wrong.
+ */
+ if (num_of_ranges != in->num_of_ranges)
+ return -EINVAL;
+
+ /*
+ * Every input frequency band comes with two end points(start/end)
+ * and each is accounted as an element. Meanwhile the range count
+ * and action type are accounted as an element each.
+ * So, the total element count = 2 * num_of_ranges + 1 + 1.
+ */
+ num_of_elements = 2 * num_of_ranges + 1 + 1;
+
+ tmp = kcalloc(num_of_elements, sizeof(*tmp), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ argv4.package.type = ACPI_TYPE_PACKAGE;
+ argv4.package.count = num_of_elements;
+ argv4.package.elements = tmp;
+
+ tmp[arg_idx].integer.type = ACPI_TYPE_INTEGER;
+ tmp[arg_idx++].integer.value = num_of_ranges;
+ tmp[arg_idx].integer.type = ACPI_TYPE_INTEGER;
+ tmp[arg_idx++].integer.value = action;
+
+ for (loop_idx = 0; loop_idx < ARRAY_SIZE(in->band_list);
+ loop_idx++) {
+ if (!in->band_list[loop_idx].start ||
+ !in->band_list[loop_idx].end)
+ continue;
+
+ tmp[arg_idx].integer.type = ACPI_TYPE_INTEGER;
+ tmp[arg_idx++].integer.value = in->band_list[loop_idx].start;
+ tmp[arg_idx].integer.type = ACPI_TYPE_INTEGER;
+ tmp[arg_idx++].integer.value = in->band_list[loop_idx].end;
+ }
+
+ ret = wbrf_dsm(adev, WBRF_RECORD, &argv4);
+
+ kfree(tmp);
+
+ return ret;
+}
+
+/**
+ * acpi_amd_wbrf_add_exclusion - broadcast the frequency band the device
+ * is using
+ *
+ * @dev: device pointer
+ * @in: input structure containing the frequency band the device is using
+ *
+ * Broadcast to other consumers the frequency band the device starts
+ * to use. Underneath the surface the information is cached into an
+ * internal buffer first. Then a notification is sent to all those
+ * registered consumers. So then they can retrieve that buffer to
+ * know the latest active frequency bands. The benifit with such design
+ * is for those consumers which have not been registered yet, they can
+ * still have a chance to retrieve such information later.
+ */
+int acpi_amd_wbrf_add_exclusion(struct device *dev,
+ struct wbrf_ranges_in_out *in)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ int ret;
+
+ if (!adev)
+ return -ENODEV;
+
+ ret = wbrf_record(adev, WBRF_RECORD_ADD, in);
+ if (ret)
+ return ret;
+
+ blocking_notifier_call_chain(&wbrf_chain_head,
+ WBRF_CHANGED,
+ NULL);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_amd_wbrf_add_exclusion);
+
+/**
+ * acpi_amd_wbrf_remove_exclusion - broadcast the frequency band the device
+ * is no longer using
+ *
+ * @dev: device pointer
+ * @in: input structure containing the frequency band which is not used
+ * by the device any more
+ *
+ * Broadcast to other consumers the frequency band the device stops
+ * to use. The stored information paired with this will be dropped
+ * from the internal buffer. And then a notification is sent to
+ * all registered consumers.
+ */
+int acpi_amd_wbrf_remove_exclusion(struct device *dev,
+ struct wbrf_ranges_in_out *in)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ int ret;
+
+ if (!adev)
+ return -ENODEV;
+
+ ret = wbrf_record(adev, WBRF_RECORD_REMOVE, in);
+ if (ret)
+ return ret;
+
+ blocking_notifier_call_chain(&wbrf_chain_head,
+ WBRF_CHANGED,
+ NULL);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_amd_wbrf_remove_exclusion);
+
+static bool acpi_amd_wbrf_supported_system(void)
+{
+ acpi_status status;
+ acpi_handle handle;
+
+ status = acpi_get_handle(NULL, ACPI_AMD_WBRF_METHOD, &handle);
+
+ return ACPI_SUCCESS(status);
+}
+
+/**
+ * acpi_amd_wbrf_supported_producer - determine if the WBRF can be enabled
+ * for the device as a producer
+ *
+ * @dev: device pointer
+ *
+ * Determine if the platform equipped with necessary implementations to
+ * support WBRF for the device as a producer.
+ */
+bool acpi_amd_wbrf_supported_producer(struct device *dev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+
+ if (!acpi_amd_wbrf_supported_system())
+ return false;
+
+ if (!adev)
+ return false;
+
+ return acpi_check_dsm(adev->handle, &wifi_acpi_dsm_guid,
+ WBRF_REVISION,
+ BIT(WBRF_RECORD));
+}
+EXPORT_SYMBOL_GPL(acpi_amd_wbrf_supported_producer);
+
+static union acpi_object *
+acpi_evaluate_wbrf(acpi_handle handle, u64 rev, u64 func)
+{
+ acpi_status ret;
+ struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object params[4];
+ struct acpi_object_list input = {
+ .count = 4,
+ .pointer = params,
+ };
+
+ params[0].type = ACPI_TYPE_INTEGER;
+ params[0].integer.value = rev;
+ params[1].type = ACPI_TYPE_INTEGER;
+ params[1].integer.value = func;
+ params[2].type = ACPI_TYPE_PACKAGE;
+ params[2].package.count = 0;
+ params[2].package.elements = NULL;
+ params[3].type = ACPI_TYPE_STRING;
+ params[3].string.length = 0;
+ params[3].string.pointer = NULL;
+
+ ret = acpi_evaluate_object(handle, "WBRF", &input, &buf);
+ if (ACPI_FAILURE(ret))
+ return NULL;
+
+ return buf.pointer;
+}
+
+static bool check_acpi_wbrf(acpi_handle handle, u64 rev, u64 funcs)
+{
+ int i;
+ u64 mask = 0;
+ union acpi_object *obj;
+
+ if (funcs == 0)
+ return false;
+
+ obj = acpi_evaluate_wbrf(handle, rev, 0);
+ if (!obj)
+ return false;
+
+ if (obj->type != ACPI_TYPE_BUFFER)
+ return false;
+
+ /*
+ * Bit vector providing supported functions information.
+ * Each bit marks support for one specific function of the WBRF method.
+ */
+ for (i = 0; i < obj->buffer.length && i < 8; i++)
+ mask |= (u64)obj->buffer.pointer[i] << i * 8;
+
+ ACPI_FREE(obj);
+
+ return mask & BIT(WBRF_ENABLED) && (mask & funcs) == funcs;
+}
+
+/**
+ * acpi_amd_wbrf_supported_consumer - determine if the WBRF can be enabled
+ * for the device as a consumer
+ *
+ * @dev: device pointer
+ *
+ * Determine if the platform equipped with necessary implementations to
+ * support WBRF for the device as a consumer.
+ */
+bool acpi_amd_wbrf_supported_consumer(struct device *dev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+
+ if (!acpi_amd_wbrf_supported_system())
+ return false;
+
+ if (!adev)
+ return false;
+
+ return check_acpi_wbrf(adev->handle,
+ WBRF_REVISION,
+ BIT(WBRF_RETRIEVE));
+}
+EXPORT_SYMBOL_GPL(acpi_amd_wbrf_supported_consumer);
+
+/**
+ * acpi_amd_wbrf_retrieve_exclusions - retrieve current active frequency
+ * bands
+ *
+ * @dev: device pointer
+ * @out: output structure containing all the active frequency bands
+ *
+ * Retrieve the current active frequency bands which were broadcasted
+ * by other producers. The consumer who calls this API should take
+ * proper actions if any of the frequency band may cause RFI with its
+ * own frequency band used.
+ */
+int acpi_amd_wbrf_retrieve_exclusions(struct device *dev,
+ struct wbrf_ranges_in_out *out)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ struct amd_wbrf_ranges_out acpi_out = {0};
+ union acpi_object *obj;
+ int ret = 0;
+
+ if (!adev)
+ return -ENODEV;
+
+ obj = acpi_evaluate_wbrf(adev->handle,
+ WBRF_REVISION,
+ WBRF_RETRIEVE);
+ if (!obj)
+ return -EINVAL;
+
+ /*
+ * The return buffer is with variable length and the format below:
+ * number_of_entries(1 DWORD): Number of entries
+ * start_freq of 1st entry(1 QWORD): Start frequency of the 1st entry
+ * end_freq of 1st entry(1 QWORD): End frequency of the 1st entry
+ * ...
+ * ...
+ * start_freq of the last entry(1 QWORD)
+ * end_freq of the last entry(1 QWORD)
+ *
+ * Thus the buffer length is determined by the number of entries.
+ * - For zero entry scenario, the buffer length will be 4 bytes.
+ * - For one entry scenario, the buffer length will be 20 bytes.
+ */
+ if (obj->buffer.length > sizeof(acpi_out) ||
+ obj->buffer.length < 4) {
+ dev_err(dev, "Wrong sized WBRT information");
+ ret = -EINVAL;
+ goto out;
+ }
+ memcpy(&acpi_out, obj->buffer.pointer, obj->buffer.length);
+
+ out->num_of_ranges = acpi_out.num_of_ranges;
+ memcpy(out->band_list, acpi_out.band_list, sizeof(acpi_out.band_list));
+
+out:
+ ACPI_FREE(obj);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(acpi_amd_wbrf_retrieve_exclusions);
+
+/**
+ * acpi_amd_wbrf_register_notifier - register for notifications of frequency
+ * band update
+ *
+ * @nb: driver notifier block
+ *
+ * The consumer should register itself via this API. So that it can get
+ * notified timely on the frequency band updates from other producers.
+ */
+int acpi_amd_wbrf_register_notifier(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&wbrf_chain_head, nb);
+}
+EXPORT_SYMBOL_GPL(acpi_amd_wbrf_register_notifier);
+
+/**
+ * acpi_amd_wbrf_unregister_notifier - unregister for notifications of
+ * frequency band update
+ *
+ * @nb: driver notifier block
+ *
+ * The consumer should call this API when it is longer interested with
+ * the frequency band updates from other producers. Usually, this should
+ * be performed during driver cleanup.
+ */
+int acpi_amd_wbrf_unregister_notifier(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(&wbrf_chain_head, nb);
+}
+EXPORT_SYMBOL_GPL(acpi_amd_wbrf_unregister_notifier);
new file mode 100644
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Wifi Band Exclusion Interface (AMD ACPI Implementation)
+ * Copyright (C) 2023 Advanced Micro Devices
+ *
+ * Due to electrical and mechanical constraints in certain platform designs
+ * there may be likely interference of relatively high-powered harmonics of
+ * the (G-)DDR memory clocks with local radio module frequency bands used
+ * by Wifi 6/6e/7.
+ *
+ * To mitigate this, AMD has introduced an ACPI based mechanism to support
+ * WBRF(Wifi Band RFI mitigation Feature) for platforms with AMD dGPU + WLAN.
+ * This needs support from BIOS equipped with necessary AML implementations
+ * and dGPU firmwares.
+ *
+ * Some general terms:
+ * Producer: such component who can produce high-powered radio frequency
+ * Consumer: such component who can adjust its in-use frequency in
+ * response to the radio frequencies of other components to
+ * mitigate the possible RFI.
+ *
+ * To make the mechanism function, those producers should notify active use
+ * of their particular frequencies so that other consumers can make relative
+ * internal adjustments as necessary to avoid this resonance.
+ */
+
+#ifndef _ACPI_AMD_WBRF_H
+#define _ACPI_AMD_WBRF_H
+
+#include <linux/device.h>
+#include <linux/notifier.h>
+
+/*
+ * A wbrf range is defined as a frequency band with start and end
+ * frequency point specified(in Hz). And a vaild range should have
+ * its start and end frequency point filled with non-zero values.
+ * Meanwhile, the maximum number of wbrf ranges is limited as
+ * `MAX_NUM_OF_WBRF_RANGES`.
+ */
+#define MAX_NUM_OF_WBRF_RANGES 11
+
+struct exclusion_range {
+ u64 start;
+ u64 end;
+};
+
+struct wbrf_ranges_in_out {
+ u64 num_of_ranges;
+ struct exclusion_range band_list[MAX_NUM_OF_WBRF_RANGES];
+};
+
+/*
+ * The notification types for the consumers are defined as below.
+ * The consumers may need to take different actions in response to
+ * different notifications.
+ * WBRF_CHANGED: there was some frequency band updates. The consumers
+ * should retrieve the latest active frequency bands.
+ */
+enum wbrf_notifier_actions {
+ WBRF_CHANGED,
+};
+
+#if IS_ENABLED(CONFIG_WBRF_AMD_ACPI)
+/*
+ * The expected flow for the producers:
+ * 1) During probe, call `acpi_amd_wbrf_supported_producer` to check
+ * if WBRF can be enabled for the device.
+ * 2) On using some frequency band, call `acpi_amd_wbrf_add_exclusion`
+ * to get other consumers properly notified.
+ * 3) Or on stopping using some frequency band, call
+ * `acpi_amd_wbrf_remove_exclusion` to get other consumers notified.
+ */
+bool acpi_amd_wbrf_supported_producer(struct device *dev);
+int acpi_amd_wbrf_remove_exclusion(struct device *dev,
+ struct wbrf_ranges_in_out *in);
+int acpi_amd_wbrf_add_exclusion(struct device *dev,
+ struct wbrf_ranges_in_out *in);
+
+/*
+ * The expected flow for the consumers:
+ * 1) During probe, call `acpi_amd_wbrf_supported_consumer` to check if WBRF
+ * can be enabled for the device.
+ * 2) Call `acpi_amd_wbrf_register_notifier` to register for notification
+ * of frequency band change(add or remove) from other producers.
+ * 3) Call the `acpi_amd_wbrf_retrieve_exclusions` intentionally to retrieve
+ * current active frequency bands considering some producers may broadcast
+ * such information before the consumer is up.
+ * 4) On receiving a notification for frequency band change, run
+ * `acpi_amd_wbrf_retrieve_exclusions` again to retrieve the latest
+ * active frequency bands.
+ * 5) During driver cleanup, call `acpi_amd_wbrf_unregister_notifier` to
+ * unregister the notifier.
+ */
+bool acpi_amd_wbrf_supported_consumer(struct device *dev);
+int acpi_amd_wbrf_retrieve_exclusions(struct device *dev,
+ struct wbrf_ranges_in_out *out);
+int acpi_amd_wbrf_register_notifier(struct notifier_block *nb);
+int acpi_amd_wbrf_unregister_notifier(struct notifier_block *nb);
+#else
+static inline
+bool acpi_amd_wbrf_supported_consumer(struct device *dev)
+{
+ return false;
+}
+static inline
+int acpi_amd_wbrf_remove_exclusion(struct device *dev,
+ struct wbrf_ranges_in_out *in)
+{
+ return -ENODEV;
+}
+static inline
+int acpi_amd_wbrf_add_exclusion(struct device *dev,
+ struct wbrf_ranges_in_out *in)
+{
+ return -ENODEV;
+}
+static inline
+bool acpi_amd_wbrf_supported_producer(struct device *dev)
+{
+ return false;
+}
+static inline
+int acpi_amd_wbrf_retrieve_exclusions(struct device *dev,
+ struct wbrf_ranges_in_out *out)
+{
+ return -ENODEV;
+}
+static inline
+int acpi_amd_wbrf_register_notifier(struct notifier_block *nb)
+{
+ return -ENODEV;
+}
+static inline
+int acpi_amd_wbrf_unregister_notifier(struct notifier_block *nb)
+{
+ return -ENODEV;
+}
+#endif
+
+#endif /* _ACPI_AMD_WBRF_H */
Due to electrical and mechanical constraints in certain platform designs there may be likely interference of relatively high-powered harmonics of the (G-)DDR memory clocks with local radio module frequency bands used by Wifi 6/6e/7. To mitigate this, AMD has introduced a mechanism that devices can use to notify active use of particular frequencies so that other devices can make relative internal adjustments as necessary to avoid this resonance. Signed-off-by: Evan Quan <evan.quan@amd.com> --- drivers/acpi/Kconfig | 17 ++ drivers/acpi/Makefile | 2 + drivers/acpi/amd_wbrf.c | 414 ++++++++++++++++++++++++++++++++++ include/linux/acpi_amd_wbrf.h | 140 ++++++++++++ 4 files changed, 573 insertions(+) create mode 100644 drivers/acpi/amd_wbrf.c create mode 100644 include/linux/acpi_amd_wbrf.h