mbox series

[v11,00/13] Add multiport support for DWC3 controllers

Message ID 20230828133033.11988-1-quic_kriskura@quicinc.com
Headers show
Series Add multiport support for DWC3 controllers | expand

Message

Krishna Kurapati Aug. 28, 2023, 1:30 p.m. UTC
Currently the DWC3 driver supports only single port controller which
requires at most two PHYs ie HS and SS PHYs. There are SoCs that has
DWC3 controller with multiple ports that can operate in host mode.
Some of the port supports both SS+HS and other port supports only HS
mode.

This change primarily refactors the Phy logic in core driver to allow
multiport support with Generic Phy's.

Changes have been tested on  QCOM SoC SA8295P which has 4 ports (2
are HS+SS capable and 2 are HS only capable).

Changes in v11:
Implemented port_count calculation by reading interrupt-names from DT.
Refactored IRQ handling in dwc3-qcom.
Moving of macros to xhci-ext-caps.h made as a separate patch.
Names of interrupts to be displayed on /proc/interrupts set to the ones
present in DT.

Changes in v10:
Refactored phy init/exit/power-on/off functions in dwc3 core
Refactored dwc3-qcom irq registration and handling
Implemented wakeup for multiport irq's
Moved few macros from xhci.h to xhci-ext-caps.h
Fixed nits pointed out in v9
Fixed Co-developed by and SOB tags in patches 5 and 11

Changes in v9:
Added IRQ support for DP/DM/SS MP Irq's of SC8280
Refactored code to read port count by accessing xhci registers

Changes in v8:
Reorganised code in patch-5
Fixed nitpicks in code according to comments received on v7
Fixed indentation in DT patches
Added drive strength for pinctrl nodes in SA8295 DT

Changes in v7:
Added power event irq's for Multiport controller.
Udpated commit text for patch-9 (adding DT changes for enabling first
port of multiport controller on sa8540-ride).
Fixed check-patch warnings for driver code.
Fixed DT binding errors for changes in snps,dwc3.yaml
Reabsed code on top of usb-next

Changes in v6:
Updated comments in code after.
Updated variables names appropriately as per review comments.
Updated commit text in patch-2 and added additional info as per review
comments.
The patch header in v5 doesn't have "PATHCH v5" notation present. Corrected
it in this version.

Changes in v5:
Added DT support for first port of Teritiary USB controller on SA8540-Ride
Added support for reading port info from XHCI Extended Params registers.

Changes in RFC v4:
Added DT support for SA8295p.

Changes in RFC v3:
Incase any PHY init fails, then clear/exit the PHYs that
are already initialized.

Changes in RFC v2:
Changed dwc3_count_phys to return the number of PHY Phandles in the node.
This will be used now in dwc3_extract_num_phys to increment num_usb2_phy 
and num_usb3_phy.

Added new parameter "ss_idx" in dwc3_core_get_phy_ny_node and changed its
structure such that the first half is for HS-PHY and second half is for
SS-PHY.

In dwc3_core_get_phy, for multiport controller, only if SS-PHY phandle is
present, pass proper SS_IDX else pass -1.

Tests done on v11:

a. ADB in device mode working on first port of SA8295P-ADP
b. Enumeration on 4 ports of SA8295 tested by connecting pendrive, mouse
and webcam

/ # lsusb -t
Bus 002 Device 004: ID 046d:085e
Bus 001 Device 001: ID 1d6b:0002
Bus 001 Device 008: ID 03f0:094a
Bus 002 Device 003: ID 0781:558b
Bus 002 Device 001: ID 1d6b:0003
Bus 001 Device 009: ID 046d:c05a

/ # dmesg | grep hub
[    1.168337] hub 1-0:1.0: USB hub found
[    1.168345] hub 1-0:1.0: 4 ports detected
[    1.169059] hub 2-0:1.0: USB hub found
[    1.169065] hub 2-0:1.0: 2 ports detected

c. Wakeup tested on 4 ports of multiport by entering system suspend and
connecting a device to each empty port and checking if it wakes up the
system or not. This method was chosen because when we enter system
suspend, power to connected peripherals was not present. So, the test was
done by connecting a peripheral to empty port and seeing if the interrupts
wake up the system or not.

d. Enumeration and wakeup tested on single port controller of SC7280 in
host mode. In this case, wakeup was initiated by a mouse click already
connected to it.

e. Interrupt registration tested on both single port and mulitport
controllers of SA8295P-ADP.

184:   0 0 0 0 0 0 0 0       PDC 127 Level     dp_hs_phy_1
185:   0 0 0 0 0 0 0 0       PDC 126 Level     dm_hs_phy_1
186:   0 0 0 0 0 0 0 0       PDC 129 Level     dp_hs_phy_2
187:   0 0 0 0 0 0 0 0       PDC 128 Level     dm_hs_phy_2
188:   0 0 0 0 0 0 0 0       PDC 131 Level     dp_hs_phy_3
189:   0 0 0 0 0 0 0 0       PDC 130 Level     dm_hs_phy_3
190:   0 0 0 0 0 0 0 0       PDC 133 Level     dp_hs_phy_4
191:   0 0 0 0 0 0 0 0       PDC 132 Level     dm_hs_phy_4
192:   0 0 0 0 0 0 0 0       PDC  16 Level     ss_phy_1
193:   0 0 0 0 0 0 0 0       PDC  17 Level     ss_phy_2
194: 630 0 0 0 0 0 0 0     GICv3 165 Level     xhci-hcd:usb1
195:   0 0 0 0 0 0 0 0       PDC  14 Level     dp_hs_phy_irq
196:   0 0 0 0 0 0 0 0       PDC  15 Level     dm_hs_phy_irq
197:   0 0 0 0 0 0 0 0       PDC 138 Level     ss_phy_irq
198:  31 0 0 0 0 0 0 0     GICv3 835 Level     dwc3
199:   0 0 0 0 0 0 0 0       PDC  12 Level     dp_hs_phy_irq
200:   0 0 0 0 0 0 0 0       PDC  13 Level     dm_hs_phy_irq
201:   0 0 0 0 0 0 0 0       PDC 136 Level     ss_phy_irq

Links to previous versions:
Link to v10: https://lore.kernel.org/all/20230727223307.8096-1-quic_kriskura@quicinc.com/
Link to v9: https://lore.kernel.org/all/20230621043628.21485-1-quic_kriskura@quicinc.com/
Link to v8: https://lore.kernel.org/all/20230514054917.21318-1-quic_kriskura@quicinc.com/
Link to v7: https://lore.kernel.org/all/20230501143445.3851-1-quic_kriskura@quicinc.com/
Link to v6: https://lore.kernel.org/all/20230405125759.4201-1-quic_kriskura@quicinc.com/
Link to v5: https://lore.kernel.org/all/20230310163420.7582-1-quic_kriskura@quicinc.com/
Link to RFC v4: https://lore.kernel.org/all/20230115114146.12628-1-quic_kriskura@quicinc.com/
Link to RFC v3: https://lore.kernel.org/all/1654709787-23686-1-git-send-email-quic_harshq@quicinc.com/#r
Link to RFC v2: https://lore.kernel.org/all/1653560029-6937-1-git-send-email-quic_harshq@quicinc.com/#r

Andrew Halaney (1):
  arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb
    controller

Harsh Agarwal (1):
  usb: dwc3: core: Refactor PHY logic to support Multiport Controller

Krishna Kurapati (11):
  dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport
  dt-bindings: usb: Add bindings for multiport properties on DWC3
    controller
  usb: xhci: Move extcaps related macros to respective header file
  usb: dwc3: core: Access XHCI address space temporarily to read port
    info
  usb: dwc3: core: Skip setting event buffers for host only controllers
  usb: dwc3: qcom: Add helper function to request threaded IRQ
  usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver
  usb: dwc3: qcom: Enable wakeup for applicable ports of multiport
  usb: dwc3: qcom: Add multiport suspend/resume support for wrapper
  arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
  arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB
    ports

 .../devicetree/bindings/usb/qcom,dwc3.yaml    |  29 ++
 .../devicetree/bindings/usb/snps,dwc3.yaml    |  13 +-
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts      |  53 +++
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts     |  22 ++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |  77 ++++
 drivers/usb/dwc3/core.c                       | 324 +++++++++++++----
 drivers/usb/dwc3/core.h                       |  16 +-
 drivers/usb/dwc3/drd.c                        |  15 +-
 drivers/usb/dwc3/dwc3-qcom.c                  | 328 ++++++++++++------
 drivers/usb/host/xhci-ext-caps.h              |  27 ++
 drivers/usb/host/xhci.h                       |  27 --
 11 files changed, 708 insertions(+), 223 deletions(-)

Comments

Krishna Kurapati Oct. 4, 2023, 7:40 a.m. UTC | #1
Hi Greg,

  Thanks for picking first 3 patches into usb-testing branch.

  Can you help pick patches 4/5 of this series as well into usb-testing 
(I checked and they apply cleanly) so that I can fix comments and rebase 
patches starting from 6 to 13 in my v12.

  Patch 4 been approved yesterday by Thinh and so far no kernel build 
bot has reported issues on these 2 patches for any configs (on v9 / v10 
/ v11).

Regards,
Krishna,
Greg Kroah-Hartman Oct. 4, 2023, 12:22 p.m. UTC | #2
On Wed, Oct 04, 2023 at 01:10:29PM +0530, Krishna Kurapati PSSNV wrote:
> Hi Greg,
> 
>  Thanks for picking first 3 patches into usb-testing branch.
> 
>  Can you help pick patches 4/5 of this series as well into usb-testing (I
> checked and they apply cleanly) so that I can fix comments and rebase
> patches starting from 6 to 13 in my v12.
> 
>  Patch 4 been approved yesterday by Thinh and so far no kernel build bot has
> reported issues on these 2 patches for any configs (on v9 / v10 / v11).

It's hard to pick up individual patches, especially with acks from
others.  Please just send that one alone with the reviewed-by and I can
pick it up that way.

thanks,

greg k-h