diff mbox series

[v2,01/17] imximage: Specify default IVT offset in IMX image

Message ID 1522708936-7603-2-git-send-email-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series warp7: Enable automated OPTEE/HAB boot flow | expand

Commit Message

Bryan O'Donoghue April 2, 2018, 10:42 p.m. UTC 
This patch adds BOOTROM_IVT_HDR_OFFSET at 0xC00. The BootROM expects to
find the IVT header at a particular offset in an i.MX image.

Defining the expected offset of the IVT header in the first-stage BootROM
image format is of use of later stage authentication routines where those
routines continue to follow the first-stage authentication layout.

This patch defines the first stage offset which later patch make use of.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
 include/imximage.h | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/include/imximage.h b/include/imximage.h
index 553b852..800fd63 100644
--- a/include/imximage.h
+++ b/include/imximage.h
@@ -14,6 +14,9 @@ 
 #define APP_CODE_BARKER	0xB1
 #define DCD_BARKER	0xB17219E9
 
+/* Specify the offset of the IVT in the IMX header as expected by BootROM */
+#define BOOTROM_IVT_HDR_OFFSET	0xC00
+
 /*
  * NOTE: This file must be kept in sync with arch/arm/include/asm/\
  *       mach-imx/imximage.cfg because tools/imximage.c can not