@@ -956,6 +956,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
{
+ u32 reg;
struct mmc_data *data = cmd->data;
host->data_timeout = 0;
@@ -1070,7 +1071,19 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
/* Set the DMA boundary value and block size */
sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
SDHCI_BLOCK_SIZE);
- sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+
+ /*
+ * For Version 4.10 onwards, if v4 mode is enabled, 16-bit Block Count
+ * register need to be set to zero, 32-bit Block Count register would
+ * be selected.
+ */
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode) {
+ if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
+ sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
+ sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
+ } else {
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ }
}
static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
@@ -28,6 +28,7 @@
#define SDHCI_DMA_ADDRESS 0x00
#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS
+#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS
#define SDHCI_BLOCK_SIZE 0x04
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
Host Controller Version 4.10 re-defines SDMA System Address register as 32-bit Block Count for v4 mode, and SDMA uses ADMA System Address register (05Fh-058h) instead if v4 mode is enabled. Also when using 32-bit block count, 16-bit block count register need to be set to zero. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> --- drivers/mmc/host/sdhci.c | 15 ++++++++++++++- drivers/mmc/host/sdhci.h | 1 + 2 files changed, 15 insertions(+), 1 deletion(-) -- 2.7.4