@@ -1729,6 +1729,14 @@ static inline bool arm_is_secure(CPUARMState *env)
}
#endif
+/**
+ * arm_hcr_el2_eff(): Return the effective value of HCR_EL2.
+ * E.g. when in secure state, fields in HCR_EL2 are suppressed,
+ * "for all purposes other than a direct read or write access of HCR_EL2."
+ * Not included here is HCR_RW.
+ */
+uint64_t arm_hcr_el2_eff(CPUARMState *env);
+
/* Return true if the specified exception level is running in AArch64 state. */
static inline bool arm_el_is_aa64(CPUARMState *env, int el)
{
@@ -2414,54 +2422,6 @@ bool write_cpustate_to_list(ARMCPU *cpu);
# define TARGET_VIRT_ADDR_SPACE_BITS 32
#endif
-/**
- * arm_hcr_el2_imo(): Return the effective value of HCR_EL2.IMO.
- * Depending on the values of HCR_EL2.E2H and TGE, this may be
- * "behaves as 1 for all purposes other than direct read/write" or
- * "behaves as 0 for all purposes other than direct read/write"
- */
-static inline bool arm_hcr_el2_imo(CPUARMState *env)
-{
- switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) {
- case HCR_TGE:
- return true;
- case HCR_TGE | HCR_E2H:
- return false;
- default:
- return env->cp15.hcr_el2 & HCR_IMO;
- }
-}
-
-/**
- * arm_hcr_el2_fmo(): Return the effective value of HCR_EL2.FMO.
- */
-static inline bool arm_hcr_el2_fmo(CPUARMState *env)
-{
- switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) {
- case HCR_TGE:
- return true;
- case HCR_TGE | HCR_E2H:
- return false;
- default:
- return env->cp15.hcr_el2 & HCR_FMO;
- }
-}
-
-/**
- * arm_hcr_el2_amo(): Return the effective value of HCR_EL2.AMO.
- */
-static inline bool arm_hcr_el2_amo(CPUARMState *env)
-{
- switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) {
- case HCR_TGE:
- return true;
- case HCR_TGE | HCR_E2H:
- return false;
- default:
- return env->cp15.hcr_el2 & HCR_AMO;
- }
-}
-
static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx,
unsigned int target_el)
{
@@ -2470,6 +2430,7 @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx,
bool secure = arm_is_secure(env);
bool pstate_unmasked;
int8_t unmasked = 0;
+ uint64_t hcr_el2;
/* Don't take exceptions if they target a lower EL.
* This check should catch any exceptions that would not be taken but left
@@ -2479,6 +2440,8 @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx,
return false;
}
+ hcr_el2 = arm_hcr_el2_eff(env);
+
switch (excp_idx) {
case EXCP_FIQ:
pstate_unmasked = !(env->daif & PSTATE_F);
@@ -2489,13 +2452,13 @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx,
break;
case EXCP_VFIQ:
- if (secure || !arm_hcr_el2_fmo(env) || (env->cp15.hcr_el2 & HCR_TGE)) {
+ if (secure || !(hcr_el2 & HCR_FMO) || (hcr_el2 & HCR_TGE)) {
/* VFIQs are only taken when hypervized and non-secure. */
return false;
}
return !(env->daif & PSTATE_F);
case EXCP_VIRQ:
- if (secure || !arm_hcr_el2_imo(env) || (env->cp15.hcr_el2 & HCR_TGE)) {
+ if (secure || !(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) {
/* VIRQs are only taken when hypervized and non-secure. */
return false;
}
@@ -2534,7 +2497,7 @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx,
* to the CPSR.F setting otherwise we further assess the state
* below.
*/
- hcr = arm_hcr_el2_fmo(env);
+ hcr = hcr_el2 & HCR_FMO;
scr = (env->cp15.scr_el3 & SCR_FIQ);
/* When EL3 is 32-bit, the SCR.FW bit controls whether the
@@ -2551,7 +2514,7 @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx,
* when setting the target EL, so it does not have a further
* affect here.
*/
- hcr = arm_hcr_el2_imo(env);
+ hcr = hcr_el2 & HCR_IMO;
scr = false;
break;
default:
@@ -85,8 +85,8 @@ static bool icv_access(CPUARMState *env, int hcr_flags)
* * access if NS EL1 and either IMO or FMO == 1:
* CTLR, DIR, PMR, RPR
*/
- bool flagmatch = ((hcr_flags & HCR_IMO) && arm_hcr_el2_imo(env)) ||
- ((hcr_flags & HCR_FMO) && arm_hcr_el2_fmo(env));
+ uint64_t hcr_el2 = arm_hcr_el2_eff(env);
+ bool flagmatch = hcr_el2 & hcr_flags & (HCR_IMO | HCR_FMO);
return flagmatch && arm_current_el(env) == 1
&& !arm_is_secure_below_el3(env);
@@ -1552,8 +1552,9 @@ static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* No need to include !IsSecure in route_*_to_el2 as it's only
* tested in cases where we know !IsSecure is true.
*/
- route_fiq_to_el2 = arm_hcr_el2_fmo(env);
- route_irq_to_el2 = arm_hcr_el2_imo(env);
+ uint64_t hcr_el2 = arm_hcr_el2_eff(env);
+ route_fiq_to_el2 = hcr_el2 & HCR_FMO;
+ route_irq_to_el2 = hcr_el2 & HCR_IMO;
switch (arm_current_el(env)) {
case 3:
@@ -1895,8 +1896,8 @@ static CPAccessResult gicv3_irqfiq_access(CPUARMState *env,
if ((env->cp15.scr_el3 & (SCR_FIQ | SCR_IRQ)) == (SCR_FIQ | SCR_IRQ)) {
switch (el) {
case 1:
- if (arm_is_secure_below_el3(env) ||
- (arm_hcr_el2_imo(env) == 0 && arm_hcr_el2_fmo(env) == 0)) {
+ /* Note that arm_hcr_el2_eff takes secure state into account. */
+ if ((arm_hcr_el2_eff(env) & (HCR_IMO | HCR_FMO)) == 0) {
r = CP_ACCESS_TRAP_EL3;
}
break;
@@ -1936,8 +1937,8 @@ static CPAccessResult gicv3_dir_access(CPUARMState *env,
static CPAccessResult gicv3_sgi_access(CPUARMState *env,
const ARMCPRegInfo *ri, bool isread)
{
- if ((arm_hcr_el2_imo(env) || arm_hcr_el2_fmo(env)) &&
- arm_current_el(env) == 1 && !arm_is_secure_below_el3(env)) {
+ if (arm_current_el(env) == 1 &&
+ (arm_hcr_el2_eff(env) & (HCR_IMO | HCR_FMO)) != 0) {
/* Takes priority over a possible EL3 trap */
return CP_ACCESS_TRAP_EL2;
}
@@ -1961,7 +1962,7 @@ static CPAccessResult gicv3_fiq_access(CPUARMState *env,
if (env->cp15.scr_el3 & SCR_FIQ) {
switch (el) {
case 1:
- if (arm_is_secure_below_el3(env) || !arm_hcr_el2_fmo(env)) {
+ if ((arm_hcr_el2_eff(env) & HCR_FMO) == 0) {
r = CP_ACCESS_TRAP_EL3;
}
break;
@@ -2000,7 +2001,7 @@ static CPAccessResult gicv3_irq_access(CPUARMState *env,
if (env->cp15.scr_el3 & SCR_IRQ) {
switch (el) {
case 1:
- if (arm_is_secure_below_el3(env) || !arm_hcr_el2_imo(env)) {
+ if ((arm_hcr_el2_eff(env) & HCR_IMO) == 0) {
r = CP_ACCESS_TRAP_EL3;
}
break;
@@ -1331,9 +1331,10 @@ static void csselr_write(CPUARMState *env, const ARMCPRegInfo *ri,
static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
CPUState *cs = ENV_GET_CPU(env);
+ uint64_t hcr_el2 = arm_hcr_el2_eff(env);
uint64_t ret = 0;
- if (arm_hcr_el2_imo(env)) {
+ if (hcr_el2 & HCR_IMO) {
if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) {
ret |= CPSR_I;
}
@@ -1343,7 +1344,7 @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri)
}
}
- if (arm_hcr_el2_fmo(env)) {
+ if (hcr_el2 & HCR_FMO) {
if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) {
ret |= CPSR_F;
}
@@ -4008,6 +4009,51 @@ static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri,
hcr_write(env, NULL, value);
}
+/*
+ * Return the effective value of HCR_EL2.
+ * Bits that are not included here:
+ * RW (read from SCR_EL3.RW as needed)
+ */
+uint64_t arm_hcr_el2_eff(CPUARMState *env)
+{
+ uint64_t ret = env->cp15.hcr_el2;
+
+ if (arm_is_secure_below_el3(env)) {
+ /*
+ * "This register has no effect if EL2 is not enabled in the
+ * current Security state". This is ARMv8.4-SecEL2 speak for
+ * !(SCR_EL3.NS==1 || SCR_EL3.EEL2==1).
+ *
+ * Prior to that, the language was "In an implementation that
+ * includes EL3, when the value of SCR_EL3.NS is 0 the PE behaves
+ * as if this field is 0 for all purposes other than a direct
+ * read or write access of HCR_EL2". With lots of enumeration
+ * on a per-field basis. In current QEMU, this is condition
+ * is arm_is_secure_below_el3.
+ *
+ * Since the v8.4 language applies to the entire register, and
+ * appears to be backward compatible, use that.
+ */
+ ret = 0;
+ } else if (ret & HCR_TGE) {
+ /* These bits are up-to-date as of ARMv8.4. */
+ if (ret & HCR_E2H) {
+ ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO |
+ HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE |
+ HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU |
+ HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE);
+ } else {
+ ret |= HCR_FMO | HCR_IMO | HCR_AMO;
+ }
+ ret &= ~(HCR_SWIO | HCR_PTW | HCR_VF | HCR_VI | HCR_VSE |
+ HCR_FB | HCR_TID1 | HCR_TID3 | HCR_TSC | HCR_TACR |
+ HCR_TSW | HCR_TTLB | HCR_TVM | HCR_HCD | HCR_TRVM |
+ HCR_TLOR);
+ }
+
+ return ret;
+}
+
static const ARMCPRegInfo el2_cp_reginfo[] = {
{ .name = "HCR_EL2", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_IO,
@@ -6526,12 +6572,13 @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
uint32_t cur_el, bool secure)
{
CPUARMState *env = cs->env_ptr;
- int rw;
- int scr;
- int hcr;
+ bool rw;
+ bool scr;
+ bool hcr;
int target_el;
/* Is the highest EL AArch64? */
- int is64 = arm_feature(env, ARM_FEATURE_AARCH64);
+ bool is64 = arm_feature(env, ARM_FEATURE_AARCH64);
+ uint64_t hcr_el2;
if (arm_feature(env, ARM_FEATURE_EL3)) {
rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW);
@@ -6543,18 +6590,19 @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
rw = is64;
}
+ hcr_el2 = arm_hcr_el2_eff(env);
switch (excp_idx) {
case EXCP_IRQ:
scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ);
- hcr = arm_hcr_el2_imo(env);
+ hcr = hcr_el2 & HCR_IMO;
break;
case EXCP_FIQ:
scr = ((env->cp15.scr_el3 & SCR_FIQ) == SCR_FIQ);
- hcr = arm_hcr_el2_fmo(env);
+ hcr = hcr_el2 & HCR_FMO;
break;
default:
scr = ((env->cp15.scr_el3 & SCR_EA) == SCR_EA);
- hcr = arm_hcr_el2_amo(env);
+ hcr = hcr_el2 & HCR_AMO;
break;
};
Replace arm_hcr_el2_{fmo,imo,amo} with a more general routine that also takes SCR_EL3.NS (aka arm_is_secure_below_el3) into account, as documented for the plethora of bits in HCR_EL2. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> ---- v3: Fix set of bits affected by just TGE. Reorder the bits to ascending order. Zap VF,VI,VSE when !TGE and ![FIA]MO. v4: Revert VF,VI,VSE change. --- target/arm/cpu.h | 67 +++++++++------------------------------ hw/intc/arm_gicv3_cpuif.c | 21 ++++++------ target/arm/helper.c | 66 ++++++++++++++++++++++++++++++++------ 3 files changed, 83 insertions(+), 71 deletions(-) -- 2.17.2