@@ -1990,7 +1990,6 @@ static void fas216_devicereset_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,
{
fas216_log(info, LOG_ERROR, "fas216 device reset complete");
- info->rstSCpnt = NULL;
info->rst_dev_status = 1;
wake_up(&info->eh_wait);
}
@@ -2145,12 +2144,12 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
fas216_checkmagic(info);
- if (!info->SCpnt)
+ if (!info->SCpnt && info->rst_dev_status)
goto no_command;
SCpnt = info->SCpnt;
info->SCpnt = NULL;
- info->scsi.phase = PHASE_IDLE;
+ info->scsi.phase = PHASE_IDLE;
if (info->scsi.aborting) {
fas216_log(info, 0, "uncaught abort - returning DID_ABORT");
@@ -2162,7 +2161,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
* Sanity check the completion - if we have zero bytes left
* to transfer, we should not have a valid pointer.
*/
- if (info->scsi.SCp.ptr && info->scsi.SCp.this_residual == 0) {
+ if (SCpnt && info->scsi.SCp.ptr && info->scsi.SCp.this_residual == 0) {
scmd_printk(KERN_INFO, SCpnt,
"zero bytes left to transfer, but buffer pointer still valid: ptr=%p len=%08x\n",
info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
@@ -2175,12 +2174,18 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
* the sense information, fas216_kick will re-assert the busy
* status.
*/
- info->device[SCpnt->device->id].parity_check = 0;
- clear_bit(SCpnt->device->id * 8 +
- (u8)(SCpnt->device->lun & 0x7), info->busyluns);
-
- fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
- fn(info, SCpnt, result);
+ if (SCpnt) {
+ info->device[SCpnt->device->id].parity_check = 0;
+ clear_bit(SCpnt->device->id * 8 +
+ (u8)(SCpnt->device->lun & 0x7), info->busyluns);
+ }
+ if (!info->rst_dev_status) {
+ info->rst_dev_status = 1;
+ wake_up(&info->eh_wait);
+ } else {
+ fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
+ fn(info, SCpnt, result);
+ }
if (info->scsi.irq) {
spin_lock_irqsave(&info->host_lock, flags);
@@ -2477,9 +2482,10 @@ int fas216_eh_abort(struct scsi_cmnd *SCpnt)
*/
int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
{
- FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
+ struct scsi_device *sdev = SCpnt->device;
+ FAS216_Info *info = (FAS216_Info *)sdev->host->hostdata;
unsigned long flags;
- int i, res = FAILED, target = SCpnt->device->id;
+ int i, res = FAILED, target = sdev->id;
fas216_log(info, LOG_ERROR, "device reset for target %d", target);
@@ -2493,7 +2499,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
* and we need a bus reset.
*/
if (info->SCpnt && !info->scsi.disconnectable &&
- info->SCpnt->device->id == SCpnt->device->id)
+ info->SCpnt->device->id == sdev->id)
break;
/*
@@ -2511,14 +2517,7 @@ int fas216_eh_device_reset(struct scsi_cmnd *SCpnt)
for (i = 0; i < 8; i++)
clear_bit(target * 8 + i, info->busyluns);
- /*
- * Hijack this SCSI command structure to send
- * a bus device reset message to this device.
- */
- SCpnt->host_scribble = (void *)fas216_devicereset_done;
-
info->rst_dev_status = 0;
- info->rstSCpnt = SCpnt;
if (info->scsi.phase == PHASE_IDLE)
fas216_kick(info);
The device reset code should not rely on the SCSI command pointer; it will be going away with the device reset handler rework. Signed-off-by: Hannes Reinecke <hare@suse.com> --- drivers/scsi/arm/fas216.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-)